CYCLAMI CY300T 자전거 트윈 라이트 콤보 사용 설명서

제품 끝view

The CYCLAMI CY300T Bicycle Twin Light Combo is designed to enhance visibility and safety for cyclists. This set includes a 300-lumen LED front light and a CY200 Smart Brake Sensing Rear Light. Both units are IPX6 waterproof, lightweight, and feature convenient USB Type-C recharging. They are suitable for various cycling disciplines, including mountain biking, gravel riding, and road cycling.

Image: The CYCLAMI CY300T Bicycle Twin Light Combo, featuring both the front headlight and the rear taillight.

무엇이 포함됩니까?

• 1 x CYCLAMI CY300T Front Light (Headlight)
• 1 x CYCLAMI CY200 Rear Light (Taillight)
• 1 x S11 Saddle Bracket (for rear light)
• 1 x S9 Bar Bracket (for front light)
• USB Type-C 충전 케이블 2개
• User Manuals for CY200 and CY300 (this document serves as a combined guide)

설정 및 설치

Front Light Installation (CY300T)

1. Identify the S9 Bar Bracket. This bracket is designed for handlebar mounting.
2. Position the S9 Bar Bracket on your bicycle's handlebar. Ensure it is placed securely and does not obstruct your view 또는 자전거의 제어.
3. Attach the CY300T Front Light to the S9 Bar Bracket. It should click firmly into place. Verify that the light is stable and facing forward.

Rear Light Installation (CY200)

1. Locate the S11 Saddle Bracket. This bracket is intended for seat bow installation.
2. Securely attach the S11 Saddle Bracket to the seat rails (bow) under your bicycle saddle. Ensure a tight fit to prevent movement during rides.
3. Slide the CY200 Rear Light onto the S11 Saddle Bracket until it locks into position. Confirm that the light is facing directly backward for maximum visibility.

Image: The CY300T front light mounted on a bicycle handlebar, illustrating its high brightness and various lighting modes.

Image: The CY200 rear light installed on a bicycle's seat bow, highlighting its intelligent brake sensing feature and automatic shut-off after inactivity.

작동 지침

조명 충전

Both the CY300T Front Light and CY200 Rear Light are equipped with 600mAh 3.7V rechargeable batteries and utilize USB Type-C for charging.

• Connect the provided USB Type-C cable to the charging port on each light.
• 케이블의 다른 쪽 끝을 표준 USB 전원 어댑터(별도 구매) 또는 컴퓨터 USB 포트에 연결하십시오.
• A flashing red light indicates that the device is charging.
• A solid green light indicates that the battery is fully charged.
• 일반적으로 완전 충전에는 약 1.5시간이 걸립니다.

Image: A CYCLAMI light connected for Type-C charging, with indicators showing charging status (red for charging, green for full) and an estimated charging time of 1.5 hours.

CY300T Front Light Operation

The CY300T Front Light offers multiple lighting modes for various riding conditions.

• 전원 켜기/끄기: 전원 버튼을 2초 동안 길게 누르면 조명을 켜거나 끌 수 있습니다.
• Change Main Light Mode: Single click the power button to cycle through the main light modes (e.g., High Light, Low Light, Flash/Daytime Running Light, Full Brightness).
• Change Secondary Light Mode: Double click the power button to cycle through secondary light modes (e.g., Runners Light).
• 명도: The front light provides up to 300 lumens of brightness.

CY200 Rear Light Operation

The CY200 Rear Light features intelligent brake sensing for enhanced safety.

• 전원 켜기/끄기: 전원 버튼을 2초 동안 길게 누르면 조명을 켜거나 끌 수 있습니다.
• 모드 변경: 전원 버튼을 한 번 클릭하면 사용 가능한 조명 모드가 순환됩니다.
• 지능형 브레이크 감지: The light automatically detects braking and activates a high-brightness mode to alert following traffic.
• 자동 차단 : If the light detects no movement for 30 seconds, it will automatically turn off to conserve battery. It will wake up upon detecting vibration.
• 명도: The rear light provides up to 200 lumens of brightness.

유지

• 청소: 부드러운 천으로 조명을 닦으세요.amp 천으로 먼지와 이물질을 제거하세요. 연마성 세제나 용제는 사용하지 마세요.
• 방수 기능: Both lights are IPX6 waterproof, meaning they are protected against powerful water jets. They are suitable for use in rainy conditions but should not be submerged in water.
• 배터리 관리 : To prolong battery life, charge the lights regularly, especially if they have not been used for an extended period. Avoid completely draining the battery before recharging.
• 저장: 조명을 사용하지 않을 때는 서늘하고 건조한 곳에 보관하십시오.

문제 해결

• 불이 켜지지 않습니다:
  • Ensure the battery is charged. Connect to a USB Type-C charger and check the charging indicator.
  • Press and hold the power button for at least 2 seconds to ensure proper power-on sequence.
• Light Does Not Hold Charge:
  • Verify the USB Type-C cable and charging adapter are functioning correctly. Try a different cable or adapter.
  • Ensure the charging port on the light is clean and free of debris.
• Rear Light Brake Sensing Not Working:
  • Ensure the light is securely mounted and not loose, as excessive vibration might interfere with the sensor.
  • The sensor relies on deceleration; ensure your braking motion is distinct.
• Light Falls Off Mount:
  • Ensure the bracket is tightly secured to the handlebar or seat bow.
  • Verify that the light is fully clicked into the bracket. A firm click should be heard.

명세서

Image: Detailed comparison table outlining specifications such as luminance, battery capacity, lighting modes, battery life, shell material, size, weight, waterproofing, charging method, and battery level alert for CY200 and CY300 lights.

보증 정보

The CYCLAMI CY300T Bicycle Twin Light Combo comes with a 6개월 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 조건에서 발생하는 제조상의 결함 및 재료상의 하자에 한해 적용됩니다. 단, 오용, 사고, 무단 개조 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다.

보증 청구를 위해 구매 증빙서류를 보관하세요.

고객 지원

For any questions, technical assistance, or warranty claims regarding your CYCLAMI CY300T Bicycle Twin Light Combo, please contact your retailer or the manufacturer directly.

제조업체: Zhuhai Kungfu Home Technology Co. Ltd

For the most up-to-date support contact information, please refer to the packaging or the official CYCLAMI web대지.