BLACK+DECKER BXCM1001IN 15 Bar Espresso Coffee Maker

중요 안전 지침

이 제품을 사용하기 전에 모든 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

• 기기가 접지된 전원 콘센트에 연결되어 있는지 확인하세요.
• 제품, 코드, 플러그를 물이나 기타 액체에 담그지 마십시오.
• 어린이가 기기를 사용하거나 어린이 근처에서 기기를 사용할 때는 면밀한 감독이 필요합니다.
• 사용하지 않을 때와 세척하기 전에는 콘센트에서 플러그를 뽑으세요. 부품을 끼우거나 떼기 전에 식힌 후, 그리고 기기를 세척하기 전에 식히세요.
• 코드나 플러그가 손상된 경우 또는 기기가 오작동하거나 어떤 식으로든 손상된 경우에는 기기를 작동하지 마십시오.
• 기기 제조업체에서 권장하지 않는 부속품을 사용하면 화재, 감전 또는 부상이 발생할 수 있습니다.
• 옥외에서는 사용하지 마십시오.
• 코드가 테이블이나 카운터 가장자리에 걸려 있거나 뜨거운 표면에 닿지 않도록 하세요.
• 뜨거운 가스나 전기 버너 근처 또는 가열된 오븐에 두지 마십시오.
• 항상 제품에 플러그를 먼저 꽂은 후, 코드를 벽면 콘센트에 꽂으세요. 전원을 끊으려면 모든 조절기를 "끔"으로 돌린 후 벽면 콘센트에서 플러그를 뽑으세요.
• 본 제품을 본래 용도 외에는 사용하지 마십시오.
• 커피 추출 과정 중에 물탱크 뚜껑을 열면 화상을 입을 수 있습니다.
• 이 제품은 가정용으로만 사용하세요.

제품 끝view

The BLACK+DECKER BXCM1001IN is a 15 Bar Espresso Coffee Maker designed for home use, featuring an 1100W heating element and a 1.5L water tank.

이미지: 앞면 view of the BLACK+DECKER BXCM1001IN Espresso Coffee Maker, showcasing its design and main controls.

주요 특징

• 15바 압력: Ensures optimal extraction for rich crema and flavor.
• 1100W 전력: Provides efficient heating for quick coffee preparation.
• Espresso/Cappuccino/Hot Water Function: Versatile for various coffee beverages.
• Dual Stainless Steel Filter: Durable and helps prevent powder from entering the cup.
• 분리형 물받이: 청소와 유지관리가 쉽습니다.
• Overheating and Pressure Protection: 작동 중 안전성을 향상시킵니다.
• 스테인레스 스틸 본체: Offers durability and a premium aesthetic.
• Adjustable Foaming Wand: Allows for customizable milk frothing levels.
• Dual Thermostat: Provides better control over water and milk temperature.
• 1.5L Detachable Transparent Water Tank: Large capacity for fewer refills and easy monitoring.
• 자동 차단 : For energy saving and safety.

Image: Table summarizing key features of the BLACK+DECKER BXCM1001IN Espresso Coffee Maker, including 15 Bar Pressure, Stainless Steel Body, Adjustable Foaming, Dual Thermostat, and 1.5L Water Tank.

Image: Visual representation of the coffee maker's features, including 1100W power, 15 bar pressure, 1.5L detachable transparent water tank, and dual stainless steel filter.

구성 요소

Familiarize yourself with the parts of your espresso machine:

• 분리형 물 탱크: Located at the back, for water storage.
• Control Panel with Light Indicator: Front-facing panel with buttons and indicator lights for operation.
• Analog Temperature Dial: Displays the current temperature of the machine.
• Knob to Release Steam: Controls the steam function for frothing.
• Metal Funnel Handle: For attaching the filter basket.
• Built-in Steamer Spout: Used for frothing milk or dispensing hot water.
• 이동식 드립 트레이: 과도한 액체를 모아주며 청소가 쉽습니다.
• 2 Drip Outlets: Allows for brewing two cups simultaneously.
• 미끄럼 방지 베이스: 조리대 위에 안정적으로 놓을 수 있습니다.

Image: Diagram illustrating the various components of the BLACK+DECKER BXCM1001IN Espresso Coffee Maker, including the water tank, control panel, temperature dial, steam knob, funnel handle, steamer spout, drip tray, and drip outlets.

설정 및 첫 사용

Before using your BLACK+DECKER BXCM1001IN Espresso Coffee Maker for the first time, it is essential to clean the internal system to ensure optimal coffee taste.

Initial Cleaning Procedure

1. Pour warm water into the water tank. Ensure the water level does not exceed the "MAX" mark. Replace the water tank cover.
2. 이동식 선반에 주전자를 올려놓으세요.
3. 증기 조절 손잡이가 OFF 위치에 있는지 확인하세요.
4. Connect the appliance to a power source. The red indicator light will illuminate.
5. Press the coffee switch. The pump will start, and water will flow out. Close the pump by pressing the coffee switch again.
6. Press the steam switch. The appliance will pre-heat, and the pre-heating indicator will illuminate. Once pre-heating is finished, press the coffee switch; hot water will flow out.
7. After water stops flowing, you can pour the water in each container out. The appliance is now ready for brewing.

Note: There may be noise when pumping water for the first time. This is normal, as the appliance is releasing air. The noise should subside after approximately 20 seconds.

Image: Detailed instructions for the initial cleaning and first use of the espresso coffee maker, including filling the water tank, placing a jug, and operating the coffee and steam switches.

작동 지침

기기 예열

1. Remove the detachable tank and open the tank cover to fill it with desired water. The water level should not exceed the "MAX" mark. Then place the tank back into the appliance properly.
2. Select the steam mesh. Set the steel mesh into the metal funnel, making sure the tube on the funnel aligns with the groove in the appliance. Then insert the funnel into the appliance from the "insert" position, and you can fix it into the coffee maker firmly through a turn until it locks.
3. 분리 가능한 선반에 에스프레소 컵을 올려보세요.
4. Connect the appliance to the power supply. Make sure the steam control knob is in the OFF position.
5. Press the power switch " " one time. The power indicator turns on and the coffee indicator blinks. After finishing preheating, the coffee indicator lights solid.
6. Press the coffee switch. When water is flowing out, close the pump immediately. The purpose of this step is to pump water into the tank housing.
7. l 때amp in the coffee switch is illuminated, you should press the coffee switch again. There will be hot water flowing out. Close the pump. The pre-heating is finished.

에스프레소 만들기

1. Ensure the appliance is pre-heated as described above.
2. Add desired amount of ground coffee into the filter basket. Do not overfill. Tamp 커피를 가볍게.
3. Attach the metal funnel handle with the filled filter basket to the appliance, ensuring it is securely locked.
4. Place one or two espresso cups under the drip outlets.
5. Press the coffee switch. Coffee will begin to brew into the cups.
6. Once the desired amount of espresso is brewed, press the coffee switch again to stop the flow.
7. Carefully remove the funnel handle and discard the used coffee grounds.

우유 거품 내기 (카푸치노/라떼용)

1. Fill a pitcher with cold milk (preferably cold, fresh milk for best results).
2. Ensure the machine is pre-heated and the steam function is ready (steam indicator light solid).
3. Submerge the steamer spout into the milk, just below the surface.
4. Turn the steam control knob to release steam.
5. Move the pitcher up and down gently to create foam. Be careful of hot steam.
6. Once desired foam consistency is achieved, turn the steam control knob to the OFF position.
7. Wipe the steamer spout immediately with a damp 천으로 닦아서 우유 잔여물이 마르지 않도록 합니다.

청소 및 유지 관리

정기적으로 청소하면 최적의 성능을 보장하고 에스프레소 머신의 수명을 연장할 수 있습니다.

매일 청소

• 드립 트레이: Empty and clean the removable drip tray after each use. Wash with warm, soapy water and rinse thoroughly.
• Filter Basket and Funnel Handle: Remove the filter basket from the funnel handle and rinse both under running water. Remove any coffee grounds.
• 수조: Empty any remaining water from the tank and rinse it. Refill with fresh water for the next use.
• Steamer Spout: After frothing milk, immediately wipe the steamer spout with a damp 천으로 닦아주세요. 스팀을 짧게 분사하여 내부에 남아있는 우유 찌꺼기를 제거하세요.
• 외부: 부드러운 천으로 기기 외부를 닦고 damp 옷감. 연마성 세제나 수세미를 사용하지 마십시오.

스케일 제거 (월 1회 또는 필요에 따라)

Mineral deposits from water can build up over time, affecting performance. Descale your machine regularly.

1. 석회질 제거제 제조업체의 지침에 따라 석회질 제거 용액을 준비하거나 식초와 물을 1:1 비율로 섞어 사용하세요.
2. 물탱크에 석회질 제거 용액을 채우세요.
3. Place a large container under the coffee outlets and the steam spout.
4. Run the machine through a brewing cycle without coffee until half of the solution has passed through.
5. Turn on the steam function and let half of the remaining solution pass through the steam spout.
6. 기계를 끄고 15~20분 정도 그대로 두세요.
7. Run the remaining solution through the coffee outlets and steam spout until the tank is empty.
8. 물탱크를 깨끗이 헹구고 깨끗한 물을 채우세요.
9. Run two full tanks of fresh water through the machine (one through coffee outlets, one through steam spout) to rinse out any descaling solution residue.

Note: The frequency of descaling depends on your water hardness and usage.

문제 해결

일반적인 문제와 해결 방법은 이 섹션을 참조하세요.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

명세서

보증 및 지원

Your BLACK+DECKER BXCM1001IN Espresso Coffee Maker comes with a 2년 보증 구매일로부터 제조상의 결함에 대한 보증을 제공합니다.

For any product inquiries, installation assistance, or warranty claims, please contact our customer care team.

Image: Customer care contact information for BLACK+DECKER, showing a headset icon and the phone number 6364914202.

고객 관리 번호: 6364914202

(Call or WhatsApp for enquiries and installation)