BOMGE M12 USB 오디오 인터페이스 사용 설명서

1. 제품 오버view

The BOMGE M12 is a compact and versatile 2-channel USB audio interface designed for recording, live streaming, karaoke, and studio applications. It features XLR/6.35mm combo inputs, 48V phantom power, and intuitive controls for easy operation. This manual provides detailed instructions to help you get the most out of your M12 audio interface.

그림 1: 전면 view of the BOMGE M12 USB Audio Interface, showing all controls and input/output ports.

2. 설정 가이드

2.1 패키지 내용

• BOMGE M12 USB Audio Interface
• USB Type-C-USB-A 케이블
• 사용자 설명서

2.2 컴퓨터에 연결하기

The BOMGE M12 is a Plug&Play device, meaning it typically does not require special drivers for Windows, macOS, or Android operating systems. Simply connect the interface to your computer using the provided USB Type-C to USB-A cable.

1. Connect the USB Type-C end of the cable to the 5V power input port on the rear of the M12 interface.
2. 케이블의 USB-A 끝을 컴퓨터의 사용 가능한 USB 포트에 연결합니다.
3. The device will be automatically recognized by your operating system. You may need to select "BOMGE M12" as your audio input and output device in your computer's sound settings or your recording software.

그림 2: 후면 view of the BOMGE M12, illustrating the Type-C 5V power input for connection to a computer or power source.

2.3 입력 연결

The M12 features versatile input options:

• XLR/6.35mm Combo Inputs (INPUT-1, INPUT-2): These inputs accept both XLR connectors for microphones and 6.35mm (1/4 inch) TRS/TS plugs for instruments (guitars, basses) or line-level devices.
• 3.5mm Mic Condenser Input: An additional 3.5mm jack is available for connecting condenser microphones that do not require 48V phantom power.

2.4 출력 연결

The M12 provides multiple output options:

• Line Output (OUT-1/L, OUT-2/R): Two 6.35mm (1/4 inch) TRS outputs for connecting to studio monitors, amplifiers, or other audio playback systems.
• 헤드폰 출력(헤드폰): A 3.5mm headphone jack for real-time monitoring of your audio.

3. 사용 설명서

3.1 컨트롤 오버view

전면 패널의 조작법에 익숙해지세요.

그림 3: 상세 view of the BOMGE M12 audio interface, highlighting all controls and their labels.

• 1/L LEVEL & 2/R LEVEL Knobs: Adjust the input gain for Input 1 and Input 2 respectively.
• 메인 노브: Controls the overall output volume to the line outputs.
• 전화 손잡이: 헤드폰 출력의 볼륨을 조절합니다.
• HI/Z Buttons: Activates high impedance mode for direct connection of guitars or basses.
• ST MON Button: Switches between Stereo and Mono monitoring modes.
• REC (MIC / MIC+PC) Button: 녹음 소스를 선택합니다.
• PHANTOM (+48V CH1-2) Button: Activates 48V phantom power for condenser microphones connected to Input 1 and Input 2.
• 직접 모니터링 버튼: Enables direct monitoring of input signals with zero latency.
• 수준 지표: LED meters display input and output signal levels.

3.2 Using 48V Phantom Power

If you are using a condenser microphone that requires external power, activate the 48V phantom power:

1. Connect your condenser microphone to either INPUT-1 or INPUT-2 using an XLR cable.
2. 를 누르세요 PHANTOM (+48V CH1-2) button. The corresponding +48V indicator light will illuminate.
3. Ensure the microphone is properly connected before activating phantom power to prevent damage.

3.3 오디오 모니터링

The M12 allows for real-time monitoring:

• 헤드폰을 연결하십시오 전화 잭.
• 조정하다 전화 knob to control the headphone volume.
• 를 누르세요 다이렉트 모니터 button to hear your input signals directly without latency from your computer.

Figure 4: The BOMGE M12 audio interface with headphones connected, demonstrating real-time monitoring capability.

3.4 Mono & Stereo Switching

그만큼 ST MON button allows you to switch between stereo and mono output for your line outputs:

• When the button is pressed (down), the output is in 단핵증. This combines both input channels into a single mono signal.
• When the button is in the pop-up state (up), the output is in STEREO. Input 1 will be sent to the left channel and Input 2 to the right channel.

Figure 5: Visual explanation of the Mono and Stereo switch functionality on the M12 interface.

3.5 Recording Mode Switch

그만큼 기록 button allows you to select the audio source for recording:

• When the button is in the 'MIC' position, only the microphone inputs are recorded.
• When the button is in the 'MIC+PC' position, both the microphone inputs and the audio playing from your computer are recorded simultaneously. This is useful for recording vocals over backing tracks.

Figure 6: The BOMGE M12 on a desk with a laptop, demonstrating the recording mode switch for microphone-only or microphone-plus-PC audio.

4. 유지관리

Proper maintenance ensures the longevity and optimal performance of your BOMGE M12 audio interface:

• 청소: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or waxes, as they may damage the finish or internal components.
• 저장: When not in use, store the M12 in a cool, dry place away from direct sunlight, excessive heat, or moisture.
• 손질: 기기를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
• 사이: Always ensure cables are properly inserted and removed gently to prevent damage to the ports.

5. 문제 해결

If you encounter issues with your BOMGE M12, refer to the following common problems and solutions:

• 사운드 출력 없음:
  • Check all cable connections (USB, line outputs, headphones).
  • Ensure the M12 is selected as the default audio output device in your computer's sound settings and recording software.
  • Verify that the MAIN and PHONES volume knobs are turned up.
  • 운영 체제와 녹음 소프트웨어의 볼륨 레벨을 확인하십시오.
• 입력 신호 없음:
  • Ensure your microphone or instrument is properly connected to the correct input.
  • Adjust the 1/L LEVEL and 2/R LEVEL knobs to increase input gain.
  • If using a condenser microphone, ensure 48V phantom power is activated (if required by the microphone).
  • Check the HI/Z button for instruments.
• Distortion or Noise:
  • Reduce the input gain (1/L LEVEL, 2/R LEVEL) if the signal is clipping (red LEDs on level indicators).
  • 모든 케이블이 양호한 상태이고 적절하게 차폐되어 있는지 확인하십시오.
  • 인터페이스를 전자기 간섭 발생원 근처에 두지 마십시오.
  • Check for ground loops if noise persists.
• 컴퓨터가 장치를 인식하지 못함:
  • Try connecting the M12 to a different USB port on your computer.
  • 컴퓨터를 다시 시작하세요.
  • USB 케이블이 손상되지 않았는지 확인하세요.
  • 운영 체제가 최신 버전인지 확인하십시오.

6. 사양

7. 보증 및 지원

Warranty information for your BOMGE M12 USB Audio Interface is typically provided with your purchase. Please refer to the documentation included in your product packaging for specific warranty terms and conditions.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding product service, please contact BOMGE customer support through the official BOMGE website or your point of purchase. Ensure you have your product model number (BMG-M12) and purchase details ready when contacting support.