매뉴얼+

MiBOXER PUSH2-3

MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

Model: PUSH2-3

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1개 제품 이상view

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 패키지 내용

  • MiBOXER PUSH2-3 Wireless Dimming Remote
  • 사용자 설명서
  • Wiring terminals (pre-attached)
MiBOXER PUSH2-3 remote, packaging, and small manual

그림 1: Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

Unboxed MiBOXER PUSH2-3 remote with wires and packaging

그림 2: The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. 안전 정보

부상이나 제품 손상을 방지하기 위해 다음 안전 예방 조치를 준수하세요.

  • 장치를 습기나 극한의 온도에 노출시키지 마십시오.
  • 설치 또는 배선 작업 전에 모든 전원을 차단하십시오.
  • 이 장치는 실내에서만 사용하도록 설계되었습니다.
  • 장치를 분해하거나 개조하지 마십시오.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 제품 특징

  • 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
  • 2.4GHz 무선 기술: Provides reliable and interference-free communication with compatible LED systems.
  • 광범위한 호환성: Works with RGB, CCT, and single-color LED systems.
  • 인체공학적 디자인: Features an easy-to-use layout for quick brightness adjustments.
  • 배터리 요구 사항: CR2032 배터리가 필요합니다(포함되지 않음).
  • 최소한의 유지관리: Designed for simple operation and long-lasting performance.

4. 사양

매개변수값
모델 번호PUSH2-3 CCT
상표미박서
무선 기술2.4GHz
통제 구역3 Zones (Independent Control)
호환 장치PUSH switch to wirelessly control brightness and switch of lights
배터리 유형CR2032(포함되지 않음)
색상하얀색
Dimensional drawing of MiBOXER PUSH2-3 remote

그림 3: Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

MiBOXER PUSH2-3 packaging dimensions

그림 4: Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. 설정

5.1 배터리 설치

  1. 리모컨 뒷면에서 배터리함을 찾으세요.
  2. 구획 덮개를 엽니다.
  3. CR2032 배터리 1개를 삽입할 때 극성(+/-)을 올바르게 맞춰주세요.
  4. 배터리 덮개를 단단히 닫으세요.

5.2 배선 및 연결

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

Connection diagram for MiBOXER PUSH2-3 remote

그림 5: Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

  1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
  2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
  3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
  4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps and controls.
  5. Once all connections are secure, restore power to the lighting system.
MiBOXER PUSH2-3 remote with internal wiring visible

그림 6: The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. 사용 설명서

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 리모컨 페어링

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

  1. Powering on the light fixture.
  2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
  3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

  • 구역 선택: Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
  • 디밍 : Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
  • 켜기/끄기: A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. 유지관리

  • 청소: 부드럽고 마른 천으로 리모컨을 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
  • 배터리 교체: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
  • 저장: 리모컨을 장기간 보관할 경우, 누액을 방지하기 위해 배터리를 제거하십시오.

8. 문제 해결

문제가능한 원인해결책
리모컨이 응답하지 않습니다.배터리가 방전되었거나 잘못 설치되었습니다.Check battery polarity or replace the CR2032 battery.
Lights not dimming or turning on/off.
  • Remote not paired with lights.
  • Incorrect wiring to PUSH switch.
  • 조명이 범위를 벗어났습니다.
  • Re-pair the remote with the lights (refer to Section 6.1).
  • Verify all wiring connections to the PUSH switch (refer to Section 5.2).
  • Ensure the remote is within 30 meters of the lights.
간헐적 제어.
  • 배터리가 부족합니다.
  • 다른 2.4GHz 장치의 간섭.
  • 배터리를 교체하세요.
  • Move the remote or lights away from potential interference sources.

9. 보증 및 지원

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Manufacturer: Miboxer

최초 출시일: 2024년 11월 5일