소개
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Jectse Thermal Shipping Label Printer. Please read this manual thoroughly before using the printer to ensure proper function and longevity.
The Jectse Thermal Shipping Label Printer is designed for high-speed, efficient label printing, supporting various platforms like FedEx, USPS, and DHL. It features 203 DPI print quality and a printing speed of up to 110mm/s.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Jectse Thermal Label Printer
- 1 x 전원 어댑터
- 1 X 전원 코드
- 1 x USB 케이블
- 1 x 사용 설명서(이 문서)
설정
1. 드라이버 설치
Before connecting the printer, download and install the latest printer driver from the official Jectse website. This step is crucial for the printer to function correctly with your operating system (Windows or OS X).
메모: Do not connect the printer to your computer via USB until the driver installation is complete.
2. 프린터 연결
- Connect the power adapter to the printer's DC input port and then plug the power cord into a wall outlet.
- Connect the USB cable to the printer's USB port and then to an available USB port on your computer.
- 프린터 뒷면에 있는 전원 스위치를 사용하여 프린터를 켜십시오.
이미지: 후면 view of the Jectse Thermal Label Printer, highlighting the power input, USB port, and LAN port for connectivity. This illustrates how to connect the power and USB cables.
3. 라벨 용지 넣기
- 프린터 덮개를 엽니다.
- Place the thermal label roll into the paper compartment, ensuring the labels face upwards. The printer supports continuous paper, label paper, and folded paper with an effective print width of 25-100mm and a maximum paper width of 104mm.
- Adjust the paper guides to fit the width of your labels snugly.
- Close the printer cover. The printer will automatically detect the label size and perform a self-test.
이미지: 내부 view of the printer's paper compartment, demonstrating the correct placement of a label roll. The image indicates support for label rolls up to 100mm in diameter and a maximum paper width of 104mm.
Image: A close-up of the printer's dual media sensor mechanism, which ensures accurate label positioning and prevents skipping during printing.
작동 지침
1. Printing a Test Page
After successful driver installation and paper loading, print a test page to confirm the printer is working correctly. Refer to your operating system's printer settings for this option.
2. 라벨 인쇄
The Jectse Thermal Shipping Label Printer is compatible with major shipping platforms such as FedEx, USPS, and DHL. To print a label:
- Open the document or application from which you wish to print (e.g., a shipping label PDF).
- "인쇄"를 선택하세요 file 메뉴.
- Choose the "Jectse Thermal Shipping Label Printer" from the list of available printers.
- Adjust print settings as needed (e.g., label size, orientation) to match your label stock.
- Click "Print." The printer will process and print labels at a high speed of 110mm/s.
Image: The Jectse Thermal Label Printer in operation, demonstrating its high-speed printing capability as a label emerges from the output slot.
유지
1. 프린트 헤드 청소
프린트 헤드를 정기적으로 청소하면 최적의 인쇄 품질을 유지하고 프린터의 수명을 연장할 수 있습니다. 인쇄 품질이 저하되거나 라벨 몇 롤을 사용할 때마다 프린트 헤드를 청소하십시오.
- 프린터 전원을 끄고 전원 코드를 뽑으세요.
- 프린터 덮개를 엽니다.
- 보풀 없는 천으로 프린트 헤드 표면을 부드럽게 닦아주세요.amp이소프로필 알코올로 세척하십시오. 물이나 연마성 세척제를 사용하지 마십시오.
- 프린트 헤드가 완전히 마를 때까지 기다린 후 덮개를 닫고 전원을 다시 연결하십시오.
이미지: 자세한 view of the thermal print head, which features self-control temperature protection for stable performance and extended service life. Regular cleaning of this component is essential.
2. 일반 청소
Wipe the exterior of the printer with a soft, dry cloth. Avoid using harsh chemicals or solvents.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 프린터가 응답하지 않습니다 | Power not connected, USB cable loose, printer off. | Check power connections, ensure USB cable is securely plugged in, turn on the printer. |
| 인쇄 품질 불량 / 라벨 색바램 | Print head dirty, incorrect thermal labels, print density settings. | Clean the print head. Ensure you are using thermal labels. Adjust print density in printer settings. |
| 라벨이 건너뛰거나 잘못 공급됨 | Paper loaded incorrectly, paper guides not adjusted, label sensor dirty. | Reload paper correctly, adjust paper guides. Clean the label sensor area. |
| 컴퓨터에서 프린터가 감지되지 않습니다. | Driver not installed, USB cable issue, printer not powered on. | Install or reinstall the printer driver. Try a different USB port or cable. Ensure printer is powered on. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | Jectse48tywhk70r-13 |
| 인쇄 방법 | Direct Line Thermal Printing |
| 해결 | 203dpi(8도트/mm) |
| 인쇄 속도 | 110mm/s (maximum) |
| 유효 인쇄 폭 | 25-100mm |
| Maximum Paper Width | 104mm |
| Print Paper Thickness | 0.06-0.30mm |
| Thermal Paper Type | Continuous Paper, Label Paper, Folded Paper |
| 통신 인터페이스 | USB |
| 운영 체제 지원 | Windows, OS X |
| 치수(길이 x 너비 x 높이) | 9.84 x 9.06 x 5.51 인치 |
| 품목 무게 | 3.81파운드 |
| 재료 | ABS |
보증 및 지원
보증 정보
Jectse products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Jectse web자세한 보증 조건은 해당 웹사이트를 참조하십시오. 보증 청구를 위해서는 구매 영수증을 증빙 자료로 보관하십시오.
고객 지원
If you encounter any issues not covered in this manual or require further assistance, please contact Jectse customer support. Contact details can usually be found on the official Jectse web사이트 또는 제품 포장에 표시되어 있습니다.
For driver downloads and additional resources, please visit the Jectse Official Store.