매뉴얼+

필월드 FW568 V2

FEELWORLD FW568 V2 5.5 inch DSLR Camera Field Monitor

사용자 설명서

1. 서론

The FEELWORLD FW568 V2 is a compact and lightweight 5.5-inch field monitor designed for DSLR and mirrorless camera users. It features a 1920x1152 IPS display, 4K HDMI input/output, and professional monitoring tools such as Waveform, 3D LUTs, Peaking Focus Assist, and more. This manual provides detailed instructions for setting up, operating, and maintaining your FW568 V2 monitor.

FEELWORLD FW568 V2 5.5 inch DSLR Camera Field Monitor with waveform and histogram displays.

Image: FEELWORLD FW568 V2 5.5 inch DSLR Camera Field Monitor with waveform and histogram displays.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • 1 × FW568 V2 Camera Monitor
  • 1 × 마이크로 HDMI 케이블
  • 1 × 선쉐이드
  • 1 × 틸트 암
  • 1 × 매뉴얼

2. 안전 정보

Please read and follow these safety guidelines to ensure proper operation and prevent damage to the device or injury to yourself:

  • 모니터를 비, 습기 또는 극한의 온도에 노출시키지 마세요.
  • 모니터를 떨어뜨리거나 강한 충격을 가하지 마십시오.
  • 모니터를 분해하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
  • 지정된 전원 어댑터와 배터리만 사용하세요.
  • 모니터를 강한 자기장으로부터 멀리하세요.
  • 부드럽고 보풀 없는 천으로 화면을 닦으세요. 액체 세척제를 화면에 직접 사용하지 마세요.

3. 제품 특징

The FEELWORLD FW568 V2 monitor offers a range of features designed to enhance your video production workflow:

  • 고해상도 디스플레이: 5.5-inch IPS screen with 1920x1152 resolution and Rec.709 color calibration for sharp, detailed, and color-accurate images.
  • 4K HDMI 입력/출력: Supports 4K UHD 3840x2160p (30/29.97/25/24/23.98Hz) and 4096x2160p (24Hz) without delay, allowing simultaneous monitoring on multiple displays.
  • 전문 모니터링 도구: Includes Waveform, Vectorscope, Histogram, Peaking Focus Assist, False Color, Exposure (Zebras), Center Marker, Safe Frames, Aspect Ratio, Zoom, Image Flip, and Embedded Audio.
  • 3D LUT 지원: Load up to 32 custom 3D LUTs via USB to preview your desired look in the field.
  • 카메라 전원 출력: Features an 8.4V DC output to power your camera, extending its run-time.
  • Dual-Purpose Battery Plate: Compatible with Sony NP-F970 series batteries.
  • 가볍고 휴대성이 뛰어난 디자인: Weighing approximately 175g (without battery), it is ideal for on-the-go shooting.
FEELWORLD FW568 V2 monitor displaying vibrant colors and a Rec.709 color gamut diagram.

Image: FEELWORLD FW568 V2 monitor displaying vibrant colors and a Rec.709 color gamut diagram, highlighting its display quality.

FEELWORLD FW568 V2 monitor held in hand, illustrating its compact and lightweight design, with dimensions shown.

Image: The compact and lightweight design of the FEELWORLD FW568 V2 monitor, shown with its dimensions.

4. 설정

4.1 모니터 전원 켜기

The FW568 V2 can be powered by a DC adapter or a compatible battery.

  • DC 전원 : Connect a 12V DC power adapter to the 'DC IN 12V' port on the side of the monitor.
  • 배터리 전원: Attach a Sony NP-F970 series battery to the integrated battery plate on the rear of the monitor. Ensure the battery is securely latched.

4.2 카메라에 연결하기

Use the provided Micro HDMI cable to connect your camera to the monitor.

  1. Connect one end of the Micro HDMI cable to your camera's HDMI output port.
  2. Connect the other end of the Micro HDMI cable to the 'HDMI IN' port on the FW568 V2 monitor.
  3. If you need to loop out the signal to another monitor, connect an HDMI cable from the 'HDMI OUT' port on the FW568 V2 to the second monitor.
Close-up of the FEELWORLD FW568 V2 monitor's side panel, showing HDMI input/output ports, DC power, USB upgrade port, and 3.5mm earphone slot.

Image: Connectivity ports of the FEELWORLD FW568 V2, including 4K HDMI input/output.

4.3 모니터 장착

포함된 틸트 암을 통해 다양한 설치 옵션을 활용할 수 있습니다.

  1. Attach the tilt arm to your camera's hot shoe or a compatible mounting point.
  2. Secure the FW568 V2 monitor to the tilt arm using the 1/4-inch screw thread.
  3. 최적의 상태로 모니터 각도를 조정하세요. view주고받음.

4.4 Powering Your Camera (Optional)

The FW568 V2 can provide power to your camera:

  1. Ensure the monitor is powered by a battery or DC adapter.
  2. Connect a compatible DC power cable (not included) from the monitor's 'DC OUT 8.4V' port to your camera's power input.
FEELWORLD FW568 V2 monitor connected to a DSLR camera, demonstrating its ability to power the camera via DC output.

Image: FEELWORLD FW568 V2 monitor powering a DSLR camera, extending operational time.

5. 모니터 작동하기

5.1 기본 컨트롤 및 메뉴 탐색

The monitor features several buttons for control and menu access:

  • 전원 버튼: Press and hold to turn the monitor on/off.
  • 메뉴 버튼: Press to access the main menu. Use the navigation buttons to browse.
  • 탐색 버튼(< / >): 메뉴 옵션을 탐색하고 값을 조정하는 데 사용됩니다.
  • F1/F2 버튼: 자주 사용하는 기능에 빠르게 접근할 수 있도록 사용자 지정 가능한 기능 버튼이 있습니다.
FEELWORLD FW568 V2 monitor showing its physical control buttons on the side and an on-screen menu interface.

Image: Intuitive controls and menu interface of the FEELWORLD FW568 V2 monitor.

5.2 전문 모니터링 도구

Access these tools via the menu or assign them to the F1/F2 function buttons:

  • 파형 : Displays the luminance and chrominance levels of your video signal, aiding in exposure and color correction.
  • 벡터스코프: Shows the color information of your image, useful for checking color balance and saturation.
  • 히스토그램 : Graphical representation of the tonal distribution in your image, helping to prevent clipping in highlights and shadows.
  • 피킹 포커스 어시스트: Highlights sharp edges in red, green, or blue, making it easier to achieve precise focus.
  • 거짓 색상 : Assigns false colors to different exposure levels, providing a quick visual guide for exposure adjustment.
  • 노출(얼룩말): Overlays zebra stripes on areas exceeding a set exposure threshold, indicating overexposed regions.
  • 3D LUT: Load custom Look Up Tables to preview color grades in real-time. Connect a USB drive with .cube LUT files to the monitor's USB port for loading.
FEELWORLD FW568 V2 monitor displaying various monitoring tools like Vectorscope, Histogram, YUV Parade, and Peaking Focus Assist.

이미지: 화면 view of the FEELWORLD FW568 V2 showcasing various accurate focus and exposure tools.

FEELWORLD FW568 V2 monitor showing before and after 3D LUT application, with DC in/out ports visible.

Image: Demonstration of 3D LUT functionality on the FEELWORLD FW568 V2, showing color transformation.

FEELWORLD FW568 V2 monitor screen showing multiple professional monitoring functions including False Color, Peaking Focus Assist, Exposure (Zebras), Center Marker, and Waveform.

Image: Comprehensive display of monitoring features such as False Color, Peaking Focus Assist, and Waveform on the FW568 V2.

6. 유지관리

6.1 청소

  • 화면: Gently wipe the screen with a soft, dry, lint-free microfiber cloth. For stubborn smudges, lightly damp물이나 화면 전용 세척액을 천에 적셔 사용하십시오 (화면에 직접 분사하지 마십시오).
  • 몸: Use a soft, dry cloth to wipe the monitor's body. Avoid abrasive materials or harsh chemicals.

6.2 보관

사용하지 않을 때는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하십시오. 장기간 보관할 경우 배터리를 분리해 두십시오.

7. 문제 해결

문제가능한 원인해결책
모니터 전원이 켜지지 않습니다.Low or dead battery; power cable not connected.Charge or replace battery; ensure power cable is securely connected.
비디오 신호가 없습니다.HDMI cable loose or faulty; incorrect input selected; camera not outputting signal.Check HDMI cable connections; ensure camera is on and outputting video; verify correct input source on monitor.
이미지가 왜곡되었거나 색상이 잘못되었습니다.Incorrect color settings; faulty HDMI cable.Reset monitor color settings to default; try a different HDMI cable.
Monitor freezes or becomes unresponsive.소프트웨어 오류.Turn off the monitor, remove power source, wait a few seconds, then restart.

8. 사양

특징세부 사항
디스플레이 크기5.5인치
해결1920 x 1152
종횡비16시 9분
명도450 cd/m² (일반)
대비율1000시 1분
View잉 각도160°(수평/수직)
입력HDMI
산출HDMI, DC 출력 8.4V
오디오 출력3.5mm 헤드폰 잭
전원 입력DC 12V, Battery (Sony NP-F series)
전력 소비≤ 8와트
단위 치수151 x 92 x 29.5mm(대략)
단위 무게175g (배터리 제외)
작동 온도-20°C ~ 55°C

9. 보증 및 지원

The FEELWORLD FW568 V2 monitor comes with a 1-year official warranty. For technical support, warranty claims, or service inquiries, please visit the official FEELWORLD website or contact their customer service department. Please retain your proof of purchase for warranty validation.

FEELWORLD Official Store: 아마존에서 FEELWORLD 스토어를 방문하세요