Tribit XSound Go

Tribit XSound Go 휴대용 ​​무선 블루투스 스피커 사용 설명서

Model: XSound Go (BTS38)

1. 서론

Thank you for choosing the Tribit XSound Go Portable Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

Tribit XSound Go Portable Bluetooth Speaker in red

Image 1.1: Tribit XSound Go Portable Bluetooth Speaker (Red). This image shows the speaker from a slight angle, highlighting its compact, cylindrical design and the Tribit logo on the front grille.

2. 제품 오버view

2.1 패키지 내용

  • Tribit XSound Go Bluetooth Speaker
  • USB-C 충전 케이블
  • 사용자 설명서

2.2 스피커 구성 요소 및 컨트롤

Familiarize yourself with the buttons and ports on your Tribit XSound Go speaker:

옆 view of Tribit XSound Go speaker showing ports

이미지 2.1: 측면 view of the Tribit XSound Go speaker, illustrating the USB-C charging port and AUX input, typically located under a protective flap.

  • 전원 버튼: 전원을 켜거나 끄려면 길게 누릅니다.
  • 볼륨 낮추기(-): 볼륨을 낮추세요.
  • 재생/일시 정지 버튼: 음악 재생/일시정지. 전화 수신/종료.
  • 볼륨 높이기(+): 볼륨을 높이세요.
  • 블루투스 버튼: 페어링 모드로 들어가려면 누르십시오.
  • USB-C 충전 포트: 스피커를 충전합니다.
  • 보조 입력: 유선 오디오 연결용.

3. 설정

3.1 스피커 충전

Before first use, fully charge your Tribit XSound Go speaker. Use the provided USB-C cable to connect the speaker to a 5V USB power adapter (not included) or a computer's USB port.

  • LED 표시기에 충전 상태가 표시됩니다.
  • A full charge provides up to 24 hours of continuous playtime.
Tribit XSound Go speaker being charged via a USB-C cable

Image 3.1: Tribit XSound Go speaker connected to a USB-C charging cable. This image demonstrates the Type-C charging port in use.

3.2 블루투스 페어링

스피커를 Bluetooth 지원 장치에 연결하려면:

  1. 스피커 전원을 켜세요. 블루투스 표시등이 깜빡이며 페어링 모드에 진입했음을 나타냅니다.
  2. 기기(스마트폰, 태블릿 등)에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
  3. Select "Tribit XSound Go" from the list.
  4. 연결되면 Bluetooth 표시등이 파란색으로 켜지고, 확인음이 들립니다.

The speaker features Bluetooth 5.3 for stable connectivity up to 150 feet (45 meters).

Tribit XSound Go speaker on a table, indicating Bluetooth 5.3 connectivity

Image 3.2: Tribit XSound Go speaker on a wooden table, symbolizing its readiness for Bluetooth 5.3 connection.

3.3 True Wireless Stereo(TWS) 페어링

You can pair two Tribit XSound Go speakers for a stereo sound experience. 메모: Older versions of the XSound Go may not be compatible with newer versions for TWS pairing.

  1. 두 스피커의 전원이 켜져 있고 다른 Bluetooth 장치에 연결되어 있지 않은지 확인하세요.
  2. On one speaker, press and hold the Bluetooth button for 3 seconds. It will enter TWS pairing mode.
  3. 두 번째 스피커에도 동일한 작업을 반복하십시오.
  4. The speakers will automatically connect to each other. Once connected, the main speaker's Bluetooth indicator will flash, and the secondary speaker's indicator will be solid.
  5. Connect your device to the main speaker via Bluetooth as described in Section 3.2.
Two Tribit XSound Go speakers paired for True Wireless Stereo (TWS) sound

Image 3.3: Two Tribit XSound Go speakers placed on a table, demonstrating a True Wireless Stereo (TWS) setup for enhanced audio.

4. 사용 설명서

4.1 기본 기능

  • 전원 켜기/끄기: 전원 버튼을 길게 누르세요.
  • 볼륨 조절: '+' 또는 '-' 버튼을 누르세요.
  • 재생/일시 중지: 재생/일시정지 버튼을 한 번 누르세요.
  • 다음 트랙: 재생/일시정지 버튼을 두 번 누르세요.
  • 이전 트랙 : 재생/일시정지 버튼을 세 번 누르세요.
  • 전화 받기/종료: 전화가 걸려오는 동안 재생/일시정지 버튼을 한 번 누르세요.
  • 전화 거부: 전화가 오는 동안 재생/일시 중지 버튼을 길게 누르세요.
  • 음성 비서(Siri/Google Now)를 활성화하세요. Press and hold the Play/Pause button when not on a call.

4.2 Customized EQ Modes

The Tribit XSound Go supports customized EQ modes for personalized sound. These can be accessed and adjusted via the Tribit App. Please ensure you have the latest version of the speaker for app compatibility.

Person adjusting EQ modes via a smartphone app connected to the Tribit XSound Go speaker

Image 4.1: A person interacting with a smartphone app to customize EQ settings for the Tribit XSound Go speaker.

5. 유지관리

5.1 방수 등급(IPX7)

The Tribit XSound Go is IPX7 waterproof, meaning it can be submerged in water up to 1 meter for 30 minutes. To maintain its waterproof integrity:

  • Ensure the rubber flap covering the charging port and AUX input is securely closed before exposure to water.
  • Do not expose the speaker to saltwater or other chemicals. If exposed, rinse with fresh water and dry thoroughly.
  • Avoid prolonged submersion or use in extreme water pressure.
Tribit XSound Go speaker in water next to a surfboard, demonstrating IPX7 waterproofing

Image 5.1: The Tribit XSound Go speaker partially submerged in water, showcasing는 IPX7 방수 기능을 갖추고 있습니다.

5.2 청소 및 보관

  • 부드러운 천으로 스피커를 청소하세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
  • 스피커는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
  • 장기간 보관할 경우, 배터리 수명을 연장하려면 몇 달에 한 번씩 배터리를 약 50%까지 충전하세요.

6. 문제 해결

스피커에 문제가 발생하면 다음의 일반적인 해결책을 참조하세요.

문제해결책
스피커 전원이 켜지지 않습니다배터리가 충전되어 있는지 확인하세요. 전원에 연결한 후 다시 시도해 보세요.
블루투스로 페어링이 불가능합니다Ensure the speaker is in pairing mode (flashing blue LED). Turn off and on your device's Bluetooth. Forget "Tribit XSound Go" from your device's Bluetooth list and re-pair. Ensure no other devices are connected to the speaker.
소리가 나지 않거나 볼륨이 작음Increase volume on both the speaker and your connected device. Ensure the speaker is properly paired. Check if the AUX cable is securely connected if using wired mode.
음향 왜곡Reduce the volume on both the speaker and your device. Ensure the speaker is not too far from your device (within Bluetooth range).
TWS 페어링 실패Ensure both speakers are disconnected from other devices. Follow TWS pairing steps carefully. Note that older and newer versions may not be TWS compatible.

7. 사양

Key technical specifications for the Tribit XSound Go speaker:

특징세부 사항
모델명엑스사운드 고
품목 모델 번호비티에스38
상표트리빗
연결 기술블루투스 5.3
무선 통신 기술블루투스
스피커 최대 출력 전력16 와트
오디오 출력 모드스테레오 재생
오디오 드라이버 유형동적 드라이버
오디오 드라이버 크기40 밀리미터
블루투스 범위최대 150피트(45미터)
전원배터리 구동(리튬 이온 배터리 2개 포함)
노는 시간최대 24시간
방수 레벨IPX7 방수
제품 치수6.7"W x 2.2"D x 2.3"H (17cm x 5.6cm x 5.8cm)
품목 무게13.7온스(0.39킬로그램)
제어 방법음성, 버튼
특별 기능Built-in XBass Technology, TWS Pairing, Built-in MIC, DSP Chip Integration
Dimensions of the Tribit XSound Go speaker: 6.7 inches wide, 2.2 inches deep, 2.3 inches high

Image 7.1: Visual representation of the Tribit XSound Go speaker's dimensions.

8. 보증 및 지원

8.1 보증 정보

The Tribit XSound Go speaker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official Tribit web자세한 이용 약관은 사이트를 참조하세요.

8.2 고객 지원

For any questions, technical assistance, or support inquiries, please contact Tribit customer service. You can find contact information and FAQs on the official Tribit web사이트 또는 Amazon 스토어 페이지를 통해: 트리빗 공식 스토어.

9. 안전 정보

  • 제품을 분해, 수리, 개조하지 마세요.
  • 제품을 불이나 고온에 노출시키지 마십시오.
  • 강한 자기장 근처에 제품을 보관하지 마십시오.
  • 지정된 충전 용량만 사용하세요tage와 현재.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 현지 규정에 따라 책임감 있게 제품을 폐기하십시오.

관련 문서 - 엑스사운드 고

사전view Tribit XSound Go 휴대용 ​​무선 스피커 사용 설명서
이 문서에서는 Tribit XSound Go 휴대용 ​​무선 스피커에 대한 지침과 사양을 제공하며, 충전, 전원 켜기/끄기, 페어링, 스테레오 모드, 안전 예방 조치 및 FCC 규정 준수에 대한 내용을 다룹니다.
사전view TRIBIT XSound Go 휴대용 ​​무선 스피커(BTS38) 사용 설명서 및 사양
TRIBIT XSound Go 휴대용 ​​무선 스피커(BTS38)의 종합 사용 설명서입니다. 충전, 전원 켜기/끄기, 블루투스 페어링, 조작 방법, 스테레오 모드(TWS), 안전 주의사항, 기술 사양, FCC 및 IC 규정 준수 사항, 적합성 선언 등을 다룹니다.
사전view Tribit XSound Go 휴대용 ​​무선 스피커 사용 설명서
Tribit XSound Go 휴대용 ​​무선 스피커에 대한 포괄적인 사용 설명서로, 충전, 전원 관리, Bluetooth 페어링 및 스테레오 모드, 장치 제어, 안전 예방 조치, 기술 사양 및 규정 준수 진술과 같은 기능을 자세히 설명합니다.
사전view TRIBIT XSound Go 휴대용 ​​무선 스피커 사용 설명서
TRIBIT XSound Go 휴대용 ​​무선 스피커 사용 설명서입니다. 충전, 전원 켜기/끄기, 페어링, 조작 방법, 스테레오 모드, 안전 수칙 및 제품 사양에 대해 알아보세요.
사전view Tribit XSound Surf Portable Wireless Speaker User Manual TS-BTS21
User manual for the Tribit XSound Surf portable wireless speaker (Model: TS-BTS21), detailing its features, specifications, operation, safety instructions, and FCC compliance.
사전view TRIBIT StormBox Mini 휴대용 무선 스피커 사용 설명서
이 사용 설명서는 TRIBIT StormBox Mini 휴대용 무선 스피커의 설치, 충전, 페어링, 제어, 스테레오 모드, 기술 사양 및 안전 주의 사항을 포함한 포괄적인 사용 방법을 제공합니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.