1. 서론
Thank you for choosing the BWT RC50 Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before using the product and keep it for future reference.
2. 안전 정보
Always observe the following safety precautions to reduce the risk of injury, electric shock, or damage to the unit.
- 사용하기 전에 모든 지침을 주의 깊게 읽으세요.
- 유지보수 또는 청소를 하기 전에 반드시 전원 공급 장치를 차단하십시오.
- 전원 코드가 손상된 경우 청소기를 작동하지 마십시오.
- 청소기가 작동 중일 때는 어린이와 애완동물이 수영장 주변에 접근하지 못하도록 하십시오.
- 이 세척제는 수온이 10°C(50°F)에서 35°C(95°F) 사이일 때만 사용하십시오.
- 수영장에 사람이 있을 때는 청소기를 사용하지 마십시오.
- 세척제를 사용하지 않을 때에는 시원하고 건조한 곳에 보관하세요.
3. 제품 오버view
3.1. 제품 설명
The BWT RC50 is a compact robotic pool cleaner designed to navigate tight spaces created by forgotten toys on the pool floor and other obstacles. Its hydrodynamic design reduces drag, so less power is needed to drive it through the water. BWT robotic cleaners are intuitive and easy to use, at the touch of a button the RC50 gets to work all by itself. The RC50 is fitted with the state of art 4D hyperfine filter. This filter consists of elastic 4D loops that trap even the tiniest particles. Their vibrating motion prevents clogging to maximize water throughput and suction power. The transparent filter lid makes it easy to see if the filter needs to be washed. For additional convenience, we’ve taken away the need to remove the filter cartridge from its housing. Simply lift a lever to release the filter and pull the filter cartridge out of the cleaner and wash it out. BWT robotic cleaners feature the most powerful suction of any robot on the market. They can significantly increase their suction power through precise adjustment of the height of intake valves. The closer they are to the surface being vacuumed, the more powerful the suction. Suction can be adjusted to efficiently capture the type of debris to be picked up. Thus, close to a beach for example, the intake valves can be set down low to effortlessly remove every grain of sand.
3.2. 주요 특징
- 4 PVC Scrubbing Wheels for effective cleaning.
- Dual Tread Breezer Technology for enhanced maneuverability.
- Anti Tangle Swivel 59 ft Cord to prevent tangling during operation.
- Premium Storage Caddy for easy storage.
- Selectable Cleaning Cycle Durations: 1.5 and 2 hours.
- Advanced 4D Hyperfine Filter for trapping even the tiniest particles.
- Adjustable Suction Power for efficient debris capture.
3.3. 제품 구성품
Figure 1: BWT RC50 Robotic Pool Cleaner (Front-side view). Shows the main body, handle, and scrubbing wheels.
Figure 2: BWT RC50 Robotic Pool Cleaner (Front view). Highlights the front scrubbing wheels and intake area.
Figure 3: BWT RC50 Robotic Pool Cleaner (Top-down view). Shows the handle and the overall compact design.
4. 설정
4.1. 풀기
- Carefully remove the BWT RC50 cleaner and all accessories from the packaging.
- 포장 목록에 기재된 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오.
- 추후 보관이나 운송을 위해 포장재를 보관하십시오.
4.2. 초기 배치 및 전원 연결
- 청소기의 작동을 방해할 수 있는 큰 이물질이 수영장에 없는지 확인하십시오.
- Uncoil the 59 ft anti-tangle swivel cord completely.
- Connect the power supply unit to a grounded electrical outlet.
- Gently lower the BWT RC50 into the pool. Ensure it sinks to the bottom and all trapped air escapes.
- Position the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool.
5. 사용 설명서
5.1. 청소 주기 시작하기
The BWT RC50 is designed for intuitive operation.
- Once the cleaner is submerged and connected to power, locate the touch control panel.
- Select your desired cleaning cycle duration: 1.5 hours or 2 hours. The cleaner will begin operation automatically.
- The cleaner will navigate the pool floor using its self-propelled mechanism, 4 PVC scrubbing wheels, and Dual Tread Breezer Technology to ensure thorough cleaning.
5.2. 흡입력 조절
The BWT RC50 allows for precise adjustment of the height of its intake valves to optimize suction power based on the type of debris.
- For fine debris like sand, adjust the intake valves to be closer to the pool surface.
- For larger debris, the intake valves can be set to a higher position.
- Refer to the diagrams in the quick start guide (not included in this manual) for specific instructions on adjusting intake valve height.
5.3. Ending a Cleaning Cycle
The cleaner will automatically stop at the end of the selected cleaning cycle. To manually stop the cleaner, press the power button on the control panel.
To remove the cleaner from the pool, gently pull the anti-tangle swivel cord until the cleaner is within reach. Use the handle to lift it out of the water. Allow excess water to drain before placing it on a clean surface.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your BWT RC50.
6.1. Cleaning the 4D Hyperfine Filter
The transparent filter lid allows you to easily see when the filter needs cleaning.
- Ensure the cleaner is disconnected from the power supply.
- Lift the lever to release the filter housing.
- Pull the filter cartridge out of the cleaner.
- Rinse the filter cartridge thoroughly with a garden hose until all debris is removed. The 4D elastic loops are designed to prevent clogging.
- Reinsert the clean filter cartridge into the cleaner and secure the lever.
6.2. 일반 청소 및 보관
- 사용 후에는 청소기 외부를 깨끗한 물로 헹궈 수영장 화학 약품이나 이물질을 제거하십시오.
- Inspect the scrubbing wheels and treads for any trapped debris and remove them if necessary.
- Store the BWT RC50 in its Premium Storage Caddy in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures.
- Ensure the power cord is neatly coiled and not kinked during storage.
7. 문제 해결
This section addresses common issues you might encounter with your BWT RC50.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 청소기가 시작되지 않습니다. | Not connected to power; Power outlet issue; Control panel error. | Ensure power cord is securely plugged in. Check the power outlet with another device. Contact customer support if the issue persists. |
| 세척 성능이 좋지 않음. | Filter is clogged; Intake valves not adjusted correctly; Large debris obstructing cleaner. | Clean the 4D hyperfine filter. Adjust intake valve height for optimal suction. Remove any large debris from the pool before operation. |
| 청소기가 멈춰버렸어요. | Obstacles in the pool; Cord tangling. | Remove toys or other obstacles from the pool. Ensure the anti-tangle swivel cord is fully extended and not kinked. |
| Cleaner floats or does not sink. | 청소기 내부에 공기가 갇혀 있습니다. | Gently rock the cleaner underwater to release any trapped air. |
If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact BWT customer support.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 중량 |
| 모델명 | RC50 |
| 품목 모델 번호 | RU2D-TRS0-T5C76 |
| 한국어: | 810045772042 |
| 제품 치수 | 22 x 22 x 22 인치 |
| 품목 무게 | 41.1파운드 |
| 재료 | 플라스틱 |
| 색상 | 파란색 |
| 전원 | 배터리 구동 |
| 배터리 설명 | 리튬이온 |
| Hose Length (Cord Length) | 59 피트 |
| 특징 | 자기 추진 |
| 제어 방법 | 만지다 |
| Cleaning Cycle Durations | 1.5시간, 2시간 |
| 능률 | High efficiency, High Suction Power, Cleaning Efficiency |
| 제조업체 | 스튜어드 그룹 유한회사 |
9. 보증 및 지원
9.1. 보증 정보
The BWT RC50 Robotic Pool Cleaner comes with a 한정 보증제품에 동봉된 보증서를 참조하여 구체적인 약관, 조건 및 보증 기간을 확인하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
9.2. 고객 지원
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact BWT customer support.
- Web대지: Visit the BWT Store on Amazon (일반적인 제품 정보)
- 이메일: Refer to your product packaging or warranty card for direct contact email.
- 핸드폰: Refer to your product packaging or warranty card for direct contact phone number.
When contacting support, please have your model number (RC50 / RU2D-TRS0-T5C76) and proof of purchase readily available.
10. 공식 제품 영상
No official product videos from the seller were provided for this model. Please refer to the written instructions and images for guidance.