소개
This manual provides essential information for the safe and effective installation, operation, and maintenance of your tectake Garden Patio Retractable Awning. Please read this manual thoroughly before assembly and retain it for future reference. This awning is designed to provide protection from sun and light rain for your patio, garden, or outdoor area.
안전 지침
- Always ensure the awning is securely clamped and properly tensioned before use.
- Do not use the awning in high winds, heavy rain, or storms. Retract the awning immediately under such conditions to prevent damage to the product or property.
- Keep children and pets away from the moving parts of the awning during operation.
- Regularly inspect the awning for any signs of wear, damage, or loose components. Do not operate if damage is present.
- 모든 조립 지침을 주의 깊게 따르세요. 잘못 조립하면 불안정해지고 잠재적인 위험이 발생할 수 있습니다.
- Ensure the installation surface is stable and capable of supporting the awning's weight and tension.
패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1x Retractable Awning fabric and frame assembly
- 1x Hand Crank
- Assembly materials (fasteners, clamps 등)
- 1x 조립 설명서 (본 문서)
명세서
| Total Dimensions (WxDxH) | approx. 200 x 120 x 211 - 304 cm |
| Folded Dimensions (WxDxH) | approx. 200 x 12 x 211 - 304 cm |
| Covering (WxD) | 약 183 x 180cm |
| Drop Arm Length | 약 120cm |
| 원단 두께 | 180g/m² |
| 자외선 차단 | 50+ |
| 무게 | 8.2kg |
| 재료 | Powder-coated steel, aluminum, 100% polyester, polyethylene, polyurethane |
| 작동 모드 | 수동 |
설정 및 조립
This awning features a clamp system for easy installation without drilling. It is recommended that two people assemble the awning.
- 구성 요소 풀기: Carefully remove all parts from the packaging and lay them out. Check against the 'Package Contents' list.
- Assemble Vertical Support Poles: Connect the sections of the vertical support poles. Ensure all connections are secure.
- 차양막 프레임 부착: Secure the awning frame to the vertical support poles according to the provided diagrams. Pay close attention to the orientation of the awning fabric roller and the drop arms.
- 천막 위치: Place the assembled awning in the desired location. The vertical poles should be positioned between a stable floor and ceiling/overhang.
- Cl로 보호amp 체계: Extend the vertical poles using the adjustable mechanism until they are firmly clamped between the floor and the upper surface. Ensure the poles are vertical and stable. Adjust the tension as needed to prevent movement.
작동 지침
The tectake Retractable Awning is operated manually using a hand crank.
- Attaching the Hand Crank: Insert the hook of the hand crank into the loop on the awning's roller mechanism.
- 천막 확장: Turn the hand crank clockwise to extend the awning fabric. Continue turning until the awning reaches the desired extension or is fully extended. Do not force the crank if resistance is met.
- 천막 접기: Turn the hand crank counter-clockwise to retract the awning fabric. Continue turning until the awning is fully retracted and secured.
- 기울기 각도 조정: The drop arms are height-adjustable, allowing you to customize the tilt angle of the awning for optimal shade or privacy. Loosen the adjustment knobs on the drop arms, set the desired height, and re-tighten securely.
유지
적절한 관리를 하면 어닝의 수명을 연장할 수 있습니다.
- 원단 세척: Clean the awning fabric with mild soap and water. Use a soft brush or sponge. Rinse thoroughly with clean water and allow to air dry completely before retracting. Do not use harsh chemicals or abrasive cleaners.
- 프레임 세척: 금속 프레임을 광고로 닦아주세요amp 먼지와 먼지를 제거하는 천.
- 점검: 모든 볼트, 나사 및 클립을 주기적으로 점검하십시오.amping mechanisms to ensure they are tight and secure. Inspect the fabric for tears, fraying, or mildew.
- 겨울 보관: For prolonged periods of non-use, especially during winter or severe weather, it is recommended to fully retract the awning and, if possible, store it in a dry, protected area.
문제 해결
- 천막이 원활하게 확장/수축되지 않습니다.
Check for obstructions in the mechanism or along the fabric path. Ensure the hand crank is properly engaged. Lubricate moving parts with a silicone-based spray if necessary.
- Awning feels unstable after setup:
Re-check the tension of the vertical support poles. Ensure they are firmly clamped between the floor and the upper surface. Verify that all assembly materials are tightened correctly.
- Fabric sags or collects water:
Adjust the tilt angle of the drop arms to ensure proper water runoff. Ensure the fabric is taut when extended. If sagging persists, inspect the frame for any bending or damage.
보증 및 지원
For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service. Keep your proof of purchase for any warranty claims.
For further assistance, please visit the official tectake web사이트를 방문하거나 고객 지원 채널에 문의하세요.
