1. 서론
The Toprig S60 Motorized Camera Slider is a precision tool designed for professional video shooting and photography. It offers smooth, controlled camera movements for various creative applications, including video, time-lapse, and panoramic shots. This manual provides detailed instructions for the proper setup, operation, and maintenance of your S60 slider.

Image 1.1: Toprig S60 Motorized Camera Slider overview.
주요 특징:
- 전동 제어: Smooth and precise movement for dynamic shots.
- Button & APP Control: Operate directly via onboard buttons or wirelessly through the dedicated mobile application.
- 다양한 모드: Supports Video Mode, Time-Lapse, Loop Mode, and 120° Panoramic shooting.
- 폭넓은 호환성: Equipped with a 1/4'' screw hole for compatibility with various cameras including GoPro and DSLR models.
- 조용한 작동: Features a brushless motor for noise levels below 30dB.
2. 안전 지침
Please read and understand all safety instructions before using the Toprig S60 Camera Slider to prevent damage to the product or injury to yourself.
- 기기를 물이나 과도한 습기에 노출시키지 마세요.
- Avoid dropping or subjecting the slider to strong impacts.
- Ensure the camera and any accessories are securely mounted before operation.
- Do not exceed the maximum load capacity: 8.8 lbs (4 kg) horizontally, 5.5 lbs (2.5 kg) vertically.
- Use only recommended power sources (NP-F type battery or DC 7.4-16.8V input).
- 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요. 품목이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

Image 3.1: Toprig S60 Package List.
- Toprig S60 Camera Slider (24 inch / 60 cm)
- 보관 가방
- 사용 설명서 (본 문서)
- 드라이버
- 예비 벨트
4. 설정
4.1 Mounting the Camera and Tripod
- Attach the slider to a tripod using the 1/4" or 3/8" mounting points located on the bottom of the slider. Ensure it is stable.
- Mount your camera onto the slider's carriage using the 1/4" screw. Tighten securely.
4.2 Powering the Slider
The Toprig S60 can be powered by an NP-F type battery (not included) or an external DC power source.

Image 4.1: Powering the Toprig S60.
- NP-F 배터리: Insert a compatible NP-F battery (e.g., NP-F550, NP-F750, NP-F970) into the battery slot on the control module.
- DC 입력 : Connect a DC power cable (not included) to the DC IN port. The input voltage는 7.4V에서 16.8V 사이여야 합니다.
4.3 앱 설치 및 연결
The Toprig S60 can be controlled wirelessly via a dedicated mobile application available for both Android and iOS devices.

Image 4.2: Wireless APP Control interface.
- Download the "TOPRIG" app from your device's app store (iOS App Store or Google Play Store).
- 모바일 장치에서 Bluetooth가 활성화되어 있는지 확인하십시오.
- Power on the Toprig S60 slider.
- Open the TOPRIG app and follow the on-screen instructions to connect to your slider.
5. 운영
5.1 온보드 버튼 제어
The control module on the slider allows for basic operation without the app.

Image 5.1: Toprig S60 Control Panel.
- 전원 버튼: Press to turn the slider on/off.
- 속도 조절 손잡이: Rotate to adjust the movement speed from 0.1cm/s to 5cm/s.
- A/B Points Setting Button: Used to set the start and end points for automated movements.
- Loop Mode Button: Activates continuous looping movement between set A and B points.
- 시작/중지 버튼: Initiates or pauses the slider's movement.
- 전원 표시기: 현재 전원 상태를 표시합니다.
5.2 앱 제어 모드
The TOPRIG app unlocks the full potential of your slider with advanced control and shooting modes.
5.2.1 비디오 모드
For smooth, continuous camera movements during video recording. Adjust speed and direction via the app.
5.2.2 Time-Lapse Mode
Automates precise movements for time-lapse photography. Configure interval time, exposure time, and number of shots within the app.

Image 5.2: Time-Lapse shooting examp르.
5.2.3 A/B Point Setting & Loop Mode
Define specific start (A) and end (B) points for repeatable movements. Loop Mode allows the slider to continuously move between these two points.

Image 5.3: A/B Point Setting.
5.2.4 Panoramic & Tracking Video Shooting
Achieve wide panoramic shots or keep a subject in focus with tracking movements.

Image 5.4: Panoramic and Tracking Shooting.
5.3 Quiet Shooting
The Toprig S60 is designed with a brushless motor to ensure quiet operation, with noise levels below 30dB, making it suitable for environments where audio quality is critical.

Image 5.5: Quiet Shooting feature.
5.4 폭넓은 호환성
The 1/4" screw hole on the slider carriage ensures broad compatibility with various camera types, including Sony, Canon, GoPro, and Insta360 cameras.

Image 5.6: Wide Camera Compatibility.
6. 유지관리
Proper maintenance ensures the longevity and optimal performance of your Toprig S60 Camera Slider.
- 청소: Use a soft, dry cloth to wipe down the slider after each use. Avoid abrasive cleaners or solvents.
- 저장: Store the slider in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- 벨트 검사: Periodically check the drive belt for any signs of wear or damage. Replace with the spare belt if necessary, using the provided screwdriver.
- 배터리 관리 : If using NP-F batteries, remove them from the slider when not in use for extended periods.
7. 문제 해결
If you encounter issues with your Toprig S60 slider, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 슬라이더에 전원이 들어오지 않습니다. | Low or depleted battery; incorrect DC power connection. | Charge or replace the NP-F battery. Ensure DC cable is properly connected and power source is adequate. |
| Slider movement is jerky or inconsistent. | Obstruction on the rail; loose camera/payload; worn belt. | Clean the slider rail. Ensure camera and accessories are securely mounted. Inspect and replace the drive belt if worn. |
| App cannot connect to the slider. | Bluetooth off; app not updated; slider not powered on. | Ensure Bluetooth is enabled on your phone. Update the TOPRIG app. Power on the slider. Restart both devices if necessary. |
| Slider makes unusual noise. | Foreign object on rail; motor issue. | Inspect the rail for debris and clean thoroughly. If noise persists, contact customer support. |
8. 사양
Detailed technical specifications for the Toprig S60 Camera Slider.

Image 8.1: Model Comparison (S60 shown on bottom).
| 특징 | 세부 사항 |
|---|---|
| 모델 | Toprig S60 Camera Slider |
| 제품 치수 | 5.51 x 3.54 x 25인치(14 x 9 x 63.5cm) |
| 품목 무게 | 4.99파운드(2.26kg) |
| Maximum Travel Distance | 425mm(16.7인치) |
| Horizontal Max. Load | 8.8파운드(4kg) |
| Vertical Max. Load | 5.5파운드(2.5kg) |
| 속도 범위 | 0.1 cm/s to 5 cm/s |
| 전원 입력 | NP-F Battery (not included) or DC 7.4-16.8V |
| 소음 수준 | 30dB 미만 |
| 장착점 | 1/4"-20, 3/8" (on slider and carriage) |
| 호환 장치 | DSLR, Mirrorless, GoPro, Insta360 cameras |
9. 고객 지원
For further assistance, technical support, or warranty inquiries, please contact Toprig customer service through the official web사이트 또는 구매 플랫폼.