1. 제품 오버view
The MIAOKE Portable Blender is designed for convenient preparation of juices, shakes, and smoothies. Its compact size and USB rechargeable battery make it suitable for home, office, travel, and sports use.
Image: MIAOKE Portable Blender with fruit, illustrating its design and included USB-C cable.
2. 패키지 내용
다음 품목이 패키지에 포함되어 있는지 확인하세요.
- MIAOKE Portable Blender (Main Unit)
- USB Type-C 충전 케이블
- 사용 설명서
3. 제품 구성품
Familiarize yourself with the different parts of your MIAOKE Portable Blender:
Image: Detailed diagram of the blender's components.
- Non-slip Cup Covers: Top and bottom covers for secure sealing.
- 휴대용 실리콘 손잡이: 휴대가 간편하도록.
- PCTG/350ml Cup: The blending container, made from BPA-free material.
- Six-blade 304 Food-Grade Blades: Stainless steel blades for efficient blending.
- 3000mAh 충전식 배터리: 통합 전원 공급 장치.
- Non-slip Rubber Bottom: 사용 중 안정성을 제공합니다.
- LED 디스플레이: Shows blending countdown and battery status.
4. 블렌더 충전하기
Before first use, fully charge the blender. The LED display will indicate charging status.
Image: Various methods for charging the blender via USB.
- Connect the provided USB Type-C cable to the charging port on the blender base.
- Connect the other end of the USB cable to a compatible power source such as a wall adapter, power bank, laptop, or car charger.
- The LED display will show the charging progress. A full charge typically takes 3-5 hours.
- 충전이 완료되면 디스플레이에 100%가 표시됩니다. 충전 케이블을 분리하세요.
5. 설정 및 첫 사용
Follow these steps for initial setup and preparing your first blend:
- 초기 청소: Before first use, disassemble the cup and blade base. Wash all parts that come into contact with food using warm soapy water. Rinse thoroughly and dry.
- 집회: Ensure the blade base is securely twisted onto the cup. The blender will not operate if the cup is not properly aligned and locked with the base.
- 충전 중: Ensure the blender is fully charged as described in Section 4.
6. 사용 설명서
Prepare your favorite drinks with these simple steps:
Image: Visual guide for operating the blender.
- 재료 준비: Cut fruits and vegetables into small pieces, approximately 1-2 cm (0.4-0.8 inches).
- 재료 추가: Place the cut ingredients into the blender cup. Do not fill more than half of the cup with solid ingredients.
- 액체 추가: Pour water, milk, or other liquids into the cup. The total volume of ingredients (solids + liquids) should not exceed 2/3 of the cup's capacity.
- 안전한 뚜껑: Ensure the blade base is tightly screwed onto the cup. The blender has a safety mechanism and will not start if the cup is not properly locked.
- 블렌딩 시작: Double-click the power button on the base to start the blending cycle. The LED display will show a 30-second countdown.
- 혼합 : During blending, gently shake the blender up and down, left and right, 6-10 times to ensure thorough mixing.
- 즐기다: Once the 30-second cycle is complete, the blender will stop automatically. Unscrew the blade base and enjoy your fresh drink.
최상의 결과를 위한 팁:
- 더 걸쭉한 혼합물을 원하면 액체를 더 추가하세요.
- Avoid blending excessively hard ingredients or large ice cubes, as this may strain the motor.
- 블렌더가 비어 있을 때 작동하지 마십시오.
Image: Illustration of the powerful 6-blade system and various blending possibilities.
7. 청소 및 유지 관리
Proper cleaning ensures hygiene and extends the life of your blender.
Image: Hand-washing the blade assembly.
- 즉시 세척: After each use, rinse the cup and blade assembly immediately to prevent food residue from drying.
- 블레이드 조립: Unscrew the blade base from the cup. Rinse the blades and the interior of the base under running water. Use a brush if necessary to remove stubborn residue. Be cautious around the sharp blades.
- 컵: Wash the cup with warm soapy water and rinse thoroughly.
- 기본 단위: The main base unit containing the motor and battery should ~ 아니다 물에 완전히 잠기도록 하십시오. 깨끗한 물로 닦아내십시오.amp 옷감.
- 건조: 모든 부품을 완전히 자연 건조시킨 후 다시 조립하거나 보관하세요.
- 저장: Store the blender in a clean, dry place away from direct sunlight.
8. 문제 해결
다음은 흔히 발생하는 문제와 그 해결책입니다.
Image: LED display error codes and their explanations.
| Issue/Error Code | 설명 | 해결책 |
|---|---|---|
| "F3" Displayed | The bottle is not completely locked onto the base. | Tighten the bottle until it is securely locked. Double-click the power button to operate normally. |
| "F2" Displayed | Overload protection activated after six consecutive uses. | To protect the motor, allow the blender to rest for five minutes for automatic recovery before further use. |
| "88" Displayed | Blade is stuck due to large fruit pieces or excessive load. Motor enters a blocking state. | The line protection program will activate, and the display will extinguish within 3 seconds. Remove the obstruction, cut ingredients into smaller pieces, and try again. |
| 블렌더가 켜지지 않음 | Low battery, improper assembly, or power button not pressed correctly. | Ensure the blender is fully charged. Verify the cup is securely locked onto the base. Double-click the power button firmly. |
| 혼합 결과가 좋지 않음 | Ingredients are too large, too little liquid, or too much solid content. | Cut ingredients into smaller pieces. Add more liquid. Do not exceed recommended fill levels (1/2 solids, 2/3 total). |
9. 기술 사양
| 특징 | 사양 |
|---|---|
| 상표 | 미아오케 |
| 모델 | B0CB15T769 |
| 용량 | 350ml(11.8온스) |
| 배터리 용량 | 3000mAh |
| 충전 시간 | 완전 충전까지 3~5시간 소요 |
| 권tage | 7.4 볼트 |
| 블레이드 | 6-blade 304 Stainless Steel |
| 재료 | PCTG (cup), BPA Free |
| 크기(대략) | 3.1인치(직경) x 9인치(높이) |
| 무게 | 약 460g (1.01파운드) |
| 특별 기능 | Portable, LED Display, USB Rechargeable |
10. 보증 및 지원
Your MIAOKE Portable Blender comes with a 12-month carefree guarantee.
- 보증 기간: 구매일로부터 12개월.
- 고객 서비스: If you encounter any issues or have questions regarding your MIAOKE Portable Blender, please contact our 24-hour customer service. We are committed to providing a satisfactory solution.
- 연락처 정보: Please refer to the contact details provided on the product packaging or the official MIAOKE web지원 사이트입니다.