1. 중요한 안전 정보
Read all instructions thoroughly before installing and operating this appliance. Keep this manual for future reference. Your safety and the safety of others are very important. Follow all safety messages outlined in this manual.
- 전기 요구 사항: 이 장치는 특수 230볼트/20옴 전원이 필요합니다.amp electrical outlet. Ensure proper grounding and use a dedicated circuit.
- 설치: Installation must be performed in accordance with national electrical codes by qualified personnel only. Do not attempt to install the unit yourself if you are not qualified.
- Operating Temperature for Heat Mode: The supplemental heating mode is designed to operate when outside temperatures are between 23°F and 76°F (-5°C and 24°C). It is not intended as a primary heat source during colder months.
- 어린이와 애완동물: 작동 중에는 어린이와 애완동물이 기기에 접근하지 못하도록 하세요.
- 유지: 청소나 유지관리 작업을 하기 전에는 항상 장치의 플러그를 뽑으세요.
2. 제품 오버view
The Keystone KSTAT12-2HD is a versatile 12,000 BTU wall-mounted air conditioner designed to provide comfort in rooms up to 550 square feet. This unit offers 4-in-1 functionality, including powerful cooling, supplemental heating, dehumidification, and fan-only operation.
이미지: 앞면 view of the Keystone 12,000 BTU Wall Mounted Air Conditioner, showing the control panel and air vents.
Its through-the-wall design saves window space and allows for more natural light. The unit features a smart remote control with a built-in thermostat for precise temperature management and energy-saving modes like 'Energy Saver' and 'Sleep' mode, along with a programmable 24-hour timer.
Image: A graphic highlighting the unit's 4-in-1 technology: Powerful Cooling (12,000 BTU - 550 Sq. Ft.), Supplemental Heating (10,600 BTU), Air Flow (3 Fan Speeds), and Dehumidification (2.5 Pints Per Hour).
Image: The Keystone air conditioner installed in a contemporary office environment, demonstrating its integration into a living or working space.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 키스톤 벽걸이형 에어컨
- 원격 제어
- AAA 배터리 2개(리모컨용)
- 메쉬 필터(사전 설치됨)
- 트림 키트
- 사용 설명서(본 문서)
- 보증 정보
4. 설치
This unit is designed for through-the-wall installation. A universal wall sleeve (24.5"-27") is required and sold separately. A trim kit is included for a finished appearance.
- 전기 연결: The unit requires a NEMA 6-20P plug and a special 230V/20AMP electrical outlet. Ensure the outlet is properly installed and grounded. The cable length is 6.5 ft. LCDI.
- 벽 슬리브: Install the wall sleeve securely according to its manufacturer's instructions.
- 유닛 배치: Carefully slide the air conditioner unit into the installed wall sleeve.
- 트림 키트: Attach the included trim kit around the unit for a neat and finished look.
Image: A graphic illustrating the easy installation process into a universal wall sleeve and the benefit of freeing up window space for natural light.
Image: A graphic showing the required NEMA 6-20P plug type for a 230V/20AMP outlet and the 6.5 ft LCDI cable length.
5. 사용 설명서
Familiarize yourself with the control panel on the unit and the remote control for optimal use.
5.1. 원격 제어
The remote control features a built-in thermostat that senses the room temperature at its location. It displays this temperature on its LCD screen and sends a signal to the AC unit every 3 minutes, ensuring accurate and precise cooling or heating based on your preferred temperature.
Image: A person comfortably operating the wall-mounted air conditioner using the remote control from a sofa.
Image: A graphic emphasizing the convenience of the built-in remote thermostat, allowing control from anywhere in the room.
5.2. 작동 모드
- 냉각 모드: Provides 12,000 BTU of cooling capacity, suitable for rooms up to 550 square feet. Adjust the temperature setting to your desired comfort level.
- Supplemental Heating Mode: Offers 10,600 BTU of supplemental heating capacity. This mode is intended to assist your primary heating system and should be used when outside temperatures are between 23°F and 76°F.
- 제습기 모드: Removes up to 2.5 pints of moisture per hour from the air, helping to reduce humidity and improve comfort.
- 팬 모드: Circulates air without cooling or heating. Choose from 3 fan speeds to suit your preference.
5.3. 에너지 절약 기능
Utilize these features to optimize energy consumption and reduce operating costs:
- 에너지 절약 모드: The fan will cycle on and off with the compressor to conserve energy once the set temperature is reached.
- 수면 모드 : Gradually increases the room temperature over several hours to save energy while you sleep, maintaining comfort.
- 24시간 타이머: 24시간 내 특정 시간에 자동으로 켜지거나 꺼지도록 장치를 프로그래밍합니다.
Image: A visual representation of the energy-efficient Sleep Mode, which adjusts temperature for energy savings during sleep.
6. 유지관리
정기적인 유지관리를 통해 최적의 성능을 보장하고 에어컨의 수명을 연장할 수 있습니다.
6.1. 공기 필터 청소
The unit is equipped with a 'Check Filter' alert that indicates when it's time to clean the mesh filter. A clean filter is crucial for efficient operation and cleaner air circulation.
- 전원 끄기 : Always unplug the air conditioner before removing the filter.
- 필터 제거: Carefully remove the mesh filter from its designated slot.
- 필터 청소: 필터를 따뜻한 비눗물로 씻고 깨끗이 헹구십시오. 필터가 심하게 오염된 경우, 세척 전에 진공청소기를 사용하여 먼지를 제거할 수 있습니다.
- 건조 필터: Allow the filter to air dry completely before reinserting it. Do not use heat to dry.
- 필터 재설치: Place the dry filter back into the unit.
이미지: 클로즈업 view of the washable, removable mesh filter being cleaned under running water.
6.2. 일반 청소
부드러운 천으로 기기 외부를 닦아주세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
7. 문제 해결
If you encounter issues with your air conditioner, refer to the following common problems and solutions. For more detailed troubleshooting, consult the comprehensive manual provided with your unit or contact customer support.
- 장치가 켜지지 않습니다: Check if the unit is properly plugged into a 230V/20A outlet. Verify the circuit breaker has not tripped. Ensure the remote control batteries are not depleted.
- 냉방/난방이 충분하지 않음: Check if the air filter is clean. Ensure no obstructions are blocking the air intake or exhaust. Verify the temperature setting is appropriate for the desired mode. Ensure windows and doors are closed.
- 비정상적인 소음: Some operational sounds are normal (e.g., fan, compressor starting/stopping). If you hear loud or unusual noises, unplug the unit and contact customer support.
- 누수: Ensure the unit is installed with a slight tilt to allow proper drainage. Check for any blockages in the drain pan or hose.
8. 사양
Detailed technical specifications for the Keystone KSTAT12-2HD air conditioner.
Image: A diagram illustrating the physical dimensions (24.2" W x 14.5" H x 20.3" D) and weight (78.3 lbs) of the air conditioner unit.
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | KSTAT12-2HD |
| 냉각 용량 | 12,000비티유 |
| 보조 난방 용량 | 10,600비티유 |
| 적용 범위 | 최대 550제곱피트 |
| 제습 능력 | 2.5 파인트/시간 |
| 권tage | 230 볼트 |
| 왓tage | 1220 와트 |
| 전원 | 코드식 전기 |
| 플러그 유형 | NEMA 6-20P |
| 케이블 길이 | 6.5 ft. LCDI |
| 치수(폭 x 높이 x 깊이) | 24.2 x 14.5 x 20.3 인치 |
| 품목 무게 | 78.3파운드 |
| 사운드 레벨 | 61.3데시벨 |
| 계절별 에너지 효율 비율(SEER) | 9.5 |
| 색상 | 밝은 흰색 |
| 재료 | 플라스틱 |
| 설치 방법 | Wall (Through-the-Wall) |
| 특별 기능 | 제습, 급속 냉방, 필터 교체 알림, 냉난방 기능, 리모컨 작동 |
Image: A room size guide indicating that a 12,000 BTU unit is suitable for areas up to 550 square feet.
9. 보증 및 지원
Your Keystone KSTAT12-2HD air conditioner comes with a comprehensive warranty:
- 1년 부품 및 공임 보증: 구매일로부터 1년간 재료 및 제조상의 결함에 대해 보증합니다.
- Additional 4 Years for Sealed System: An extended warranty covers the sealed refrigeration system components for an additional four years (total of five years).
For warranty claims, technical assistance, or further support, please refer to the contact information provided in the warranty document included with your product or visit the official Keystone web대지.