Jectse 2.4GHz 4-Channel RC Gyro Receiver Instruction Manual

1. 제품 오버view

The Jectse 2.4GHz 4-Channel RC Gyro Receiver is designed for remote control vehicles such as cars and boats. It features a single antenna bidirectional transmission system and integrates a high-performance gyroscope for enhanced control. This receiver is compatible with AFHDS 3 transmitters, including Flysky NB4, Noble Lite, and Noble Pro series.

주요 특징은 다음과 같습니다.

• Bidirectional transmission with a single antenna.
• Support for PWM, PPM, i BUS2, S.BUS, and J BUS data output.
• Compatibility with AFHDS 3 protocol transmitters.
• Built-in high-performance gyroscope.
• Integrated BVD (Battery Voltage Detection) function.
• PPX6 splash-proof rating.

Image 1.1: The Jectse RC Gyro Receiver highlighting its multi-function capabilities, including external single antenna with back propagation, built-in high-performance gyroscope, integrated BVD battery voltage detection, and PPX6 splash-proof design.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x Gyro Receiver
• 연결 케이블 1개
• 1 x 사용 설명서(이 문서)
• 1 x 플라스틱 상자

Image 2.1: The Jectse RC Gyro Receiver shown alongside its included connection cable.

3. 사양

Image 3.1: The Jectse RC Gyro Receiver, illustrating its single antenna bidirectional transmission system and the various data output types supported (PWM, PPM, i BUS, S.BUS, i BUS2).

4. 설정 및 설치

Follow these steps to properly install and set up your Jectse RC Gyro Receiver:

1. 물리적 설치: Mount the receiver securely in your RC vehicle (car or boat), ensuring it is protected from excessive vibration and moisture.
2. 전원 연결: Connect the receiver to a power source within the specified input power range of 3.5-9 V DC.
3. 송신기 호환성: Ensure your transmitter uses the AFHDS 3 protocol. Compatible transmitters include Flysky PL18, NB4, NB4 Lite, and other Noble series transmitters.
4. 바인딩 프로세스:
   • 수신기의 전원을 켭니다.
   • 를 누르고 계세요 묶다 수신기의 버튼을 누릅니다.
   • Initiate the binding process on your AFHDS 3 compatible transmitter according to its specific instructions.
   • 연결이 완료되면 수신기의 표시등이 켜져 연결이 성공적으로 이루어졌음을 알려줍니다.
5. Data Output Connections: Connect your servos, ESC, and other components to the appropriate PWM, PPM, i BUS2, S.BUS, or J BUS ports on the receiver.
6. BVD Port Connection: If using the Battery Voltage Detection (BVD) function, connect the provided cable to the BVD port 오직. Do not connect other components to this port.
7. Gyroscope Function (Noble Series): For Noble series transmitters, you may need to enable the gyroscope function (INr4 GYB) through your transmitter's settings menu. Refer to your transmitter's manual for detailed instructions.

이미지 4.1: 클로즈업 view of the Jectse RC Gyro Receiver, showing the various ports for connections and the "Bind" button for pairing with a transmitter.

Image 4.2: The connection cable, with a clear warning to connect it to the BVD port only for battery voltag전자 탐지.

5. 사용 설명서

Once the receiver is successfully installed and bound to your transmitter, you can begin operation:

• 기본 제어: Use your AFHDS 3 transmitter to control your RC vehicle. The receiver processes signals for steering, throttle, and other functions via the connected servos and ESC.
• 자이로스코프 기능: The built-in gyroscope provides stability and improved handling, especially for drift cars and other high-performance vehicles. Adjust gyroscope sensitivity via your transmitter if supported.
• 배터리 용량tage Detection (BVD): If the BVD cable is connected, your transmitter can display the real-time battery voltage of your RC vehicle, allowing you to monitor power levels during operation.
• 데이터 출력: The receiver supports various data output protocols. Ensure your connected devices (e.g., flight controllers, telemetry modules) are configured to receive data from the appropriate port (PWM, PPM, i BUS2, S.BUS, J BUS).

Image 5.1: The Jectse RC Gyro Receiver, detailing its compatibility with AFHDS 3 transmitters (PL18, NB4, NB4 Lite) and its suitability for various RC applications including drift cars, recreational vehicles, F1, and linear acceleration cars. It also notes the ability to enable gyroscope function for Noble series.

6. 유지관리

적절한 유지 관리는 수신기의 수명 연장과 안정적인 성능을 보장합니다.

• 청소: Regularly clean the receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• 환경 조건: Operate and store the receiver within the specified temperature range (-10°C to +60°C) and humidity range (20%-95%).
• 습기 보호: While the receiver is PPX6 splash-proof, avoid submerging it in water or exposing it to heavy rain. Ensure all connections are dry before powering on.
• 연결 무결성: Periodically check all wire connections for looseness or damage. Secure any loose connections.
• 펌웨어 업데이트: The receiver supports online updates. Check the Jectse official website or your transmitter's manufacturer for available firmware updates to ensure optimal performance and access to new features.

7. 문제 해결

수신기에 문제가 발생하면 다음의 일반적인 문제 해결 단계를 참조하십시오.

• 전원 없음:
  • Check power source connection and battery charge.
  • 입력 볼륨을 확인하세요tage is within 3.5-9 V DC.
• 바인딩 실패:
  • Ensure both receiver and transmitter are in binding mode.
  • Verify your transmitter is AFHDS 3 compatible.
  • Move closer to the transmitter during the binding process.
  • 다른 2.4GHz 장치의 간섭을 확인하세요.
• Loss of Signal/Intermittent Control:
  • 안테나 위치를 확인하고, 장애물이나 손상이 없는지 확인하십시오.
  • 송신기 배터리 잔량을 확인하십시오.
  • 근처에 강한 간섭원이 없는지 확인하세요.
• Gyroscope Not Functioning (Noble Series):
  • Confirm the gyroscope function (INr4 GYB) is enabled in your transmitter's settings.
  • Refer to your transmitter's manual for specific gyroscope calibration or adjustment procedures.
• 잘못된 데이터 출력:
  • Verify that connected devices are configured for the correct data protocol (PWM, PPM, i BUS2, S.BUS, J BUS).
  • Check wiring connections to ensure they are correctly plugged into the designated ports.

If problems persist, consult the support resources mentioned in the next section.

8. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Jectse customer service directly. Keep your proof of purchase for warranty claims.

추가 지원이 필요한 경우 다음을 방문할 수도 있습니다. 아마존의 Jectse 스토어.