SUREWHEEL K10 프로젝터 사용 설명서

1. 서론

Thank you for choosing the SUREWHEEL K10 Projector. This manual provides essential information for the safe and efficient use of your device. The K10 projector features a 12000 Lumen brightness, 4K support, 5G WiFi, Bluetooth 5.0, and a fully enclosed dustproof design, offering a superior home cinema experience.

2. 제품 오버view

주요 특징

• Fully Enclosed Dustproof Design: The K10 projector incorporates a completely sealed design to significantly reduce dust ingress, extending the projector's lifespan and maintaining image quality.
• 균일한 밝기: Experience consistent image brightness across the entire screen, eliminating dark areas and ensuring a visually uniform projection.
• 4K Support & 1080P Native Resolution: Enjoy high-definition content with support for 4K video playback and a native 1080P resolution.
• 고급 연결성 : Equipped with Bluetooth 5.0 for audio devices and 5G WiFi for stable, lag-free screen mirroring.
• Flexible Image Adjustment: Features 4-point and 4D keystone correction, along with a 50-100% zoom function, to adapt to various projection angles and distances.
• 대형 투사 크기: Capable of projecting an image up to 300 inches for an immersive view경험.

패키지 내용

• SUREWHEEL K10 Projector
• 리모콘(배터리는 포함되어 있지 않음)
• 전원 케이블
• HDMI 케이블
• 사용자 설명서

3. 설정

놓기

The SUREWHEEL K10 projector offers versatile placement options to suit your environment:

• 데스크탑 배치: 프로젝터를 안정적이고 평평한 표면에 놓으십시오.
• 삼각대 마운트: Utilize the tripod mounting hole on the bottom of the projector for flexible positioning.
• 천장 마운트: The projector can be inverted and mounted to the ceiling for a permanent setup.

Image: Various installation options for the SUREWHEEL K10 projector, including ceiling mount, desktop placement, and tripod compatibility.

전원 연결

Connect the provided power cable to the projector's power input and then to a power outlet. The projector will indicate power status.

Initial Focus Adjustment

After powering on, adjust the focus ring located near the lens until the projected image appears clear and sharp on your screen or wall.

이미지: 앞면 view of the SUREWHEEL K10 projector, showing the lens and design, where the focus ring is typically located.

4. 사용 설명서

전원 켜기/끄기

To power on the projector, open the lens cover. To power off, close the lens cover. Alternatively, use the power button on the remote control or the projector itself.

기본 탐색

Use the remote control to navigate through the projector's menu. The directional buttons allow you to move between options, and the 'OK' button confirms selections. Volume and input source buttons are also available on the remote.

5. 연결성

블루투스 5.0 연결

The K10 projector supports Bluetooth 5.0 for connecting external audio devices such as headphones or speakers. To connect:

1. Bluetooth 오디오 장치가 페어링 모드인지 확인하세요.
2. 프로젝터 메뉴에서 블루투스 설정으로 이동하세요.
3. 페어링할 수 있는 기기 목록에서 기기를 선택하세요.

Image: An infographic illustrating the SUREWHEEL K10 projector's Bluetooth 5.0 capability, connecting to headphones, speakers, and other compatible devices.

5G WiFi and Screen Mirroring

Connect your K10 projector to a 5G WiFi network for stable internet access and seamless screen mirroring from your smartphone or tablet (iOS and Android compatible).

1. Navigate to the WiFi settings on the projector and connect to your desired 5G network.
2. For screen mirroring, select the appropriate mirroring function (e.g., 'Whale Cast' or 'Miracast') from the projector's home screen.
3. On your mobile device, enable screen mirroring/casting and select the K10 projector from the list of available devices.

Image: The SUREWHEEL K10 projector displaying content via 5G WiFi screen mirroring from a smartphone, highlighting wireless connectivity.

유선 연결

The K10 projector provides multiple wired input options:

• HDMI 포트(HDMI1, HDMI2): Connect laptops, gaming consoles, TV boxes, or other HDMI-enabled devices.
• USB 포트(U1, U2): 미디어 재생을 위해 USB 드라이브를 연결하세요.
• AV 포트: AV 출력 단자가 있는 구형 기기를 연결하는 데 사용합니다.

Image: The rear panel of the SUREWHEEL K10 projector, displaying HDMI, USB, and AV input ports for various wired connections.

6. 이미지 조정

키스톤 보정

The K10 projector features 4-point and 4D keystone correction to adjust the image shape, ensuring a perfectly rectangular picture even when the projector is not perfectly aligned with the screen.

• Access keystone settings via the projector menu.
• Adjust each corner (4-point) or the overall vertical/horizontal angle (4D) until the image is correctly proportioned.

줌 기능

Adjust the size of the projected image without moving the projector using the digital zoom function (50-100%).

• Find the zoom setting in the image adjustment menu.
• Use the remote control to increase or decrease the image size as needed.

Image: An illustration showing the projector's 4-point and 4D keystone correction capabilities, along with the 50-100% zoom function for flexible image adjustment.

7. 유지관리

먼지 보호

The K10 projector's fully enclosed optical engine is designed to prevent dust from entering the internal components, which helps maintain image clarity and extends the product's lifespan. No special dust cleaning is typically required for internal components.

Image: A visual representation of the SUREWHEEL K10 projector's fully enclosed design, emphasizing its dustproof feature for enhanced durability.

청소

To clean the exterior of the projector, use a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches. Do not use abrasive cleaners or solvents.

8. 문제 해결

• 이미지 없음: Ensure the power cable is securely connected and the projector is turned on. Verify the correct input source is selected.
• 흐릿한 이미지: Adjust the focus ring on the projector lens until the image is clear. Check the projection distance and adjust if necessary.
• 소리 없음: Check the volume settings on the projector and any connected audio devices. If using Bluetooth, ensure the device is properly paired and connected. If using wired audio, check cable connections.
• 이미지가 왜곡됨: Use the keystone correction function in the settings menu to adjust the image shape.
• 원격 제어가 작동하지 않음: Ensure batteries are correctly inserted and not depleted. Point the remote directly at the projector's IR receiver.

9. 사양

10. 보증 및 지원

제조업체 보증

The SUREWHEEL K10 Projector comes with a 2-year manufacturer warranty. Please retain your proof of purchase for warranty claims.

고객 지원

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official SUREWHEEL web대지.