Haworth Zody Dual Posture Mesh Office Chair Instruction Manual

소개

The Haworth Zody Dual Posture Mesh Office Chair is engineered for ergonomic support, accommodating both traditional sitting and active 'perch' postures. This chair is designed to enhance comfort and productivity in various work environments, including those with sit-to-stand desks. It features advanced adjustability and is recognized for its environmental certifications.

The Haworth Zody chair integrated into a modern office environment.

Key features include pneumatic seat height adjustment, 4-dimensional padded armrests, a Pelvic and Asymmetrical Lumbar system, back stop, tilt tension control, forward tilt option, seat depth adjustment, soft casters, and an aluminum base. The chair is designed to accommodate a wide range of body shapes and supports up to 400 lbs.

위에view of key features and certifications of the Zody chair.

설정

Your Haworth Zody chair arrives fully assembled and ready for immediate use. No additional assembly steps are required. Simply remove it from the packaging and place it in your desired location.

작동 지침

The Zody chair offers multiple adjustment points to customize your seating experience for optimal comfort and support.

1. 좌석 높이 조절

Locate the pneumatic lever on the right side, under the seat. To raise the seat, lift the lever while taking your weight off the seat. To lower the seat, lift the lever while seated and apply downward pressure. Adjust until your feet are flat on the floor or a footrest, and your knees are at approximately a 90-degree angle.

2. Armrest Adjustment (4-Dimensional)

The padded armrests can be adjusted in four ways:

• 키: 팔걸이 지지대 측면에 있는 버튼을 누르고 팔걸이를 위아래로 밀어 올리세요.
• 깊이(전진/후진): 팔걸이 패드를 앞뒤로 밀어주세요.
• 너비(안쪽/바깥쪽): Slide the armrest pad horizontally.
• 피벗: 팔걸이 패드를 안쪽 또는 바깥쪽으로 돌리세요.

3. Lumbar Support (Pelvic and Asymmetrical Lumbar System)

The Zody chair features a Pelvic and Asymmetrical Lumbar system for precise lower back support. Locate the adjustment controls on the back of the chair. These controls allow you to fine-tune the lumbar support to match the natural curve of your spine, providing targeted comfort.

뒤쪽 view of the Zody chair, highlighting the backrest and lumbar support area.

4. 백스톱

To lock the backrest in an upright or reclined position, use the back stop lever, typically found on the left side under the seat. Engage the lever to lock the backrest at your desired angle. Disengage to allow the backrest to recline freely.

5. 기울기 장력

The tilt tension knob is located under the seat, usually at the front. Turn the knob clockwise to increase the resistance when reclining, making it harder to tilt back. Turn counter-clockwise to decrease resistance, allowing for easier reclining. Adjust to your preferred level of recline effort.

6. 앞으로 기울이기

Activate the forward tilt option to position the seat pan slightly forward, promoting an open hip angle. This can be beneficial for active work postures. Locate the specific control for forward tilt, often a lever or button under the seat. Engage it to activate, disengage to return to a neutral or reclined position.

7. 좌석 깊이 조절

Use the lever or button located under the seat to slide the seat pan forward or backward. Adjust the seat depth so there is a small gap (about two to three fingers) between the front edge of the seat and the back of your knees. This ensures proper thigh support and circulation.

옆 view illustrating the chair's adjustable components.

유지

To maintain the appearance and functionality of your Haworth Zody chair, follow these care instructions:

• 부분 세척: 액체를 쏟거나 얼룩이 생겼을 경우, 순한 세제를 사용하여 즉시 부분적으로 닦아내십시오.amp cloth. Gently blot the affected area; do not rub vigorously.
• 가혹한 화학 물질을 피하세요: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the upholstery, mesh, or frame finishes.
• 일반 먼지 제거: Dust the chair regularly with a soft, dry cloth to prevent dust buildup.
• 캐스터 관리: Periodically check the soft casters for debris (e.g., hair, lint) and clean as necessary to ensure smooth movement.

문제 해결

If you encounter any issues with your Haworth Zody chair, consider the following basic troubleshooting steps:

• Adjustment Not Working: Ensure all levers and knobs are fully engaged or disengaged as required for the specific adjustment. Sometimes a slight jiggle or re-attempt can resolve minor sticking.
• 삐걱거리는 소리/소음: Check that all visible connections are secure. If the noise persists, it may indicate a need for professional inspection.
• Chair Movement Issues: Verify that casters are clean and free of obstructions. Ensure the chair is used on an appropriate surface (hard floor recommended for soft casters).

For persistent issues or concerns not addressed here, please contact Haworth customer support for assistance.

명세서

차원 이상view of the Haworth Zody chair.

GREENGUARD Gold certification for low chemical emissions.

보증 및 지원

The Haworth Zody chair is backed by a 12년 보증, ensuring craftsmanship and quality under normal use. This warranty covers defects in materials and workmanship for a period of twelve years from the date of purchase.

The Haworth Zody chair comes with a 12-year limited warranty.

For warranty claims, technical support, or any product-related inquiries, please contact Haworth Inc. directly through their official customer service channels. Please have your purchase information and model details (Zody, B0BTYW2ZRR) available when contacting support.

안전 정보

경고:

• Always use the adjustable features (seat height, back stop, seat depth) with caution to prevent injury.
• Do not force the swivel base to rotate beyond its natural range of motion.
• Exercise care when cleaning the chair to avoid damaging any parts or finishes.
• 의자를 사용하기 전에 안정적이고 평평한 표면에 놓으십시오.
• 의자 위에 올라가거나 사다리로 사용하지 마세요.