Hurom H400 Cold Press Juicer Machine Instruction Manual

소개

Thank you for choosing the Hurom H400 Cold Press Juicer Machine. This award-winning masticating slow juicer is designed for easy cleaning, hands-free operation with a self-feeding wide mouth hopper, and simple assembly. Our patented Slow Squeeze technology minimizes oxidation, ensuring fresher, nutrient-rich juice with minimal pulp and a higher yield. This manual provides essential information for the safe and efficient operation of your juicer.

제품 특징

• Minimal Pulp & Smooth Texture: Enjoy a velvety juice texture with a two-part auger that effectively strains juice with very low pulp content.
• High Yield & Nutrient Preservation: Patented Slow Squeeze technology minimizes oxidation, extracting maximum juice and nutrients that last up to 72 hours.
• 청소하기 쉬움: Revolutionary strainer-free chamber set eliminates the need for scrubbing, preventing clogged pulp.
• Maximized Self-Feeding Hopper: Accommodates larger ingredients without extensive chopping, reducing prep time.
• 조용한 작동: Designed with a quiet motor for peaceful morning use.
• 안전하고 내구성: Constructed from 100% BPA-free, impact-resistant ABS plastic, with no blades or sharp parts.

설정 및 조립

Proper assembly ensures optimal performance and safety. Follow these steps to set up your Hurom H400 juicer:

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼내세요. 포장 목록에 있는 모든 구성품이 있는지 확인하세요.
2. Place Main Body: Position the main juicer body on a stable, flat surface.
3. Assemble Chamber Set: Insert the inner chamber components (auger, strainer-free chamber) into the main body. Align the marks for correct placement.
4. 호퍼 부착: Place the self-feeding hopper onto the assembled chamber. Rotate until it locks securely into place. The juicer will not operate if the hopper is not correctly locked.
5. 컨테이너 위치 지정: Place the juice collection cup under the juice spout and the pulp collection cup under the pulp outlet.

어셈블리 비디오

Video: Official Hurom H400 Easy Clean Slow Juicer assembly and feature overview by Hurom America.

작동 지침

The Hurom H400 is designed for simple and efficient juicing. Follow these steps for operation:

1. 재료 준비: Wash fruits and vegetables thoroughly. The wide mouth hopper can accommodate larger pieces, reducing the need for extensive pre-chopping.
2. 적재 호퍼: Place your prepared ingredients into the self-feeding hopper. The juicer is designed to process ingredients hands-free once loaded.
3. 주스 만들기 시작하기: Ensure the juicer is properly assembled and the hopper is locked. Plug in the power cord and turn the On/Off switch to 'ON'. The auger will begin to slowly press the ingredients.
4. 즙과 과육을 모으세요: Fresh juice will flow into the juice collection cup, and dry pulp will be expelled into the pulp collection cup.
5. 연속 착즙: You can add more ingredients to the hopper while the juicer is running.
6. 역방향 기능: If ingredients become jammed, use the 'REV' (Reverse) function to dislodge them before resuming normal operation.
7. 착즙 마무리: Once all ingredients are processed, turn the On/Off switch to 'OFF' and unplug the juicer.

운영 비디오

Video: Executive Chef Ana Machado demonstrates juicing with the Hurom H400, showcasing는 효율성입니다.

Video: Hurom America highlights key reasons to love the H400, including its operational benefits.

청소 및 유지 관리

The Hurom H400 is designed for easy cleaning. Regular cleaning after each use will maintain hygiene and prolong the life of your juicer.

1. 분해: Turn off and unplug the juicer. Remove the hopper, then the chamber set from the main body. Separate the auger and strainer-free components.
2. 부품 헹구기: Rinse all removable parts under running water. The strainer-free design significantly reduces pulp residue, making rinsing quick and easy.
3. 브러시로 청소: Use the provided cleaning brush to remove any stubborn pulp residue from crevices.
4. 손세탁만 가능: All removable parts are recommended for hand washing. Do not place them in a dishwasher.
5. 본체 닦기: 광고로 본체 닦기amp 천. 본체를 물에 담그지 마십시오.
6. 건조 및 보관: 주서기를 다시 조립하거나 보관하기 전에 모든 부품이 완전히 건조되었는지 확인하세요.

문제 해결

If you encounter any issues with your Hurom H400 juicer, please refer to the following common troubleshooting tips:

• Juicer Not Turning On: Ensure the power cord is securely plugged into a working outlet. Verify that all parts (chamber, hopper) are correctly assembled and locked into place. The juicer has a safety mechanism that prevents operation if not properly assembled.
• Ingredients Jamming: If ingredients get stuck, press the 'REV' (Reverse) button to rotate the auger in the opposite direction to dislodge them. Then, switch back to 'ON' to resume juicing. Ensure ingredients are not excessively large or fibrous without proper pre-cutting.
• 주스에 과육이 너무 많음: While the H400 is designed for minimal pulp, some very soft or overripe fruits might produce slightly more. Ensure the chamber set is clean and free from any blockages.
• Low Juice Yield: Ensure ingredients are fresh and firm. Overly soft or dry ingredients may yield less juice. For optimal extraction, feed ingredients at a steady, moderate pace.
• 비정상적인 소음: If you hear unusual noises, immediately turn off and unplug the juicer. Disassemble and check for any foreign objects or improperly assembled parts.

For further assistance, please contact Hurom customer support.

명세서

보증 및 지원

Hurom is committed to providing high-quality products and excellent customer service. Your Hurom H400 Cold Press Juicer Machine comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For product support, spare parts, or warranty claims, please visit the official Hurom America website or contact their customer service department. Hurom has over 50 years of experience in promoting healthier lifestyles through innovative nutrition solutions.