MX MX CS-4 L

MX CS-4 L 4-Inch Ceiling Speaker with LED Light User Manual

Model: MX CS-4 L

1. 제품 오버view

The MX CS-4 L is a 4-inch ceiling speaker designed for seamless integration into various environments, providing both audio output and ambient LED lighting. This speaker features a durable ABS frame and a high-compliance polymer cone for clear sound reproduction. It is suitable for a wide range of applications including homes, offices, and public address systems.

주요 특징:

  • Excellent Frequency Response.
  • Premium flush mount design with stylish grill.
  • Lightweight and stiff polymer cones for damping and bass response.
  • Integrated 5 Watt White LED Bulb.
  • Bluetooth connectivity for wireless control.

2. 안전 정보

설치 및 작동 전에 모든 안전 지침을 주의 깊게 읽으십시오. 지침을 따르지 않으면 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

  • 전기 안전: Ensure power is disconnected at the main circuit breaker before performing any installation or wiring. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
  • 설치 위치 : Install speakers in a location that can structurally support their weight. Avoid installing near heat sources, in direct sunlight, or in areas with excessive moisture.
  • 통풍: Ensure adequate ventilation around the speaker to prevent overheating.
  • 손질: Handle the speaker carefully to avoid damage to the cone or housing.

3. 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

  • MX CS-4 L Ceiling Speaker with LED Light (Quantity as per pack)
  • Installation Cut-out Template

4. 설정 및 설치

Follow these steps for proper installation of your MX CS-4 L ceiling speaker.

4.1 사전 설치

  • Determine the optimal location for your speaker, ensuring no obstructions (e.g., joists, electrical wires, plumbing) are present in the ceiling cavity.
  • Ensure the ceiling material is suitable for mounting and can support the speaker's weight.
  • 설치 구역의 전원을 메인 차단기에서 차단하십시오.

4.2 Creating the Ceiling Cut-out

  1. Use the provided cut-out template to mark the desired opening on the ceiling.
  2. 적절한 도구(예: 석고보드 톱)를 사용하여 조심스럽게 구멍을 잘라냅니다.

4.3 배선 연결

The speaker requires connections for both audio and the integrated LED light. Refer to the back of the speaker for connection terminals.

뒤쪽 view of MX CS-4 L ceiling speaker showing audio and power terminals

이미지 1: 뒤쪽 view of the MX CS-4 L ceiling speaker, illustrating the audio input terminals and the AC power connection for the LED light.

  1. 오디오 연결: 연결하세요 amplifier, audio receiver, or public address system to the speaker's audio input terminals. Ensure correct polarity (+ to + and - to -) for optimal sound.
  2. LED 전원 연결: Connect the AC 220V, 50Hz power supply to the dedicated LED power terminals on the speaker.

4.4 스피커 장착

앞쪽 view of MX CS-4 L ceiling speaker without grill, showing LED ring and mounting clips

이미지 2: 앞쪽 view of the MX CS-4 L ceiling speaker with the grill removed, highlighting the integrated LED light ring and the spring-loaded mounting clips.

  1. Carefully insert the speaker into the cut-out opening.
  2. The integrated screw-loaded clamps (or spring-loaded clips) will secure the speaker flush against the ceiling. Tighten screws if applicable, or ensure clips are fully engaged.
  3. Attach the speaker grill by aligning it with the speaker frame and gently pushing until it snaps into place.
앞쪽 view of MX CS-4 L ceiling speaker with grill installed

이미지 3: 앞쪽 view of the MX CS-4 L ceiling speaker with the protective grill installed, showing its flush-mount design.

5. 운영

5.1 오디오 재생

Once connected to an audio source (amplifier, receiver, mixer), turn on your audio equipment and the speaker. Adjust the volume from your audio source. The speaker is designed to deliver clear and balanced sound for both speech and music.

5.2 LED 조명 제어

The integrated LED light can be controlled via an app or Bluetooth. Refer to the specific instructions for the control app or Bluetooth pairing process to manage the light's on/off state.

6. 유지관리

Regular maintenance ensures optimal performance and longevity of your speaker.

  • 청소: Use a soft, dry cloth to wipe the speaker grill and frame. Do not use harsh chemicals, solvents, or abrasive cleaners.
  • 먼지 제거: Periodically remove dust from the speaker surface to prevent accumulation that could affect sound quality or LED light output.
  • 점검: Occasionally inspect the speaker for any visible damage or loose connections.

7. 문제 해결

If you encounter issues with your MX CS-4 L speaker, refer to the following troubleshooting guide:

문제가능한 원인해결책
스피커에서 소리가 나지 않음
  • Loose audio connections
  • 오디오 소스가 꺼져 있거나 음소거됨
  • 잘못된 amp리퍼 설정
  • 모든 오디오 케이블을 확인하고 단단히 고정하십시오.
  • Ensure audio source is on and volume is up.
  • 확인하다 amplifier output settings.
LED 조명이 작동하지 않음
  • No power to LED
  • 느슨한 전원 연결
  • App/Bluetooth control issue
  • Ensure AC 220V power is supplied to the LED terminals.
  • Check and secure LED power connections.
  • Verify app settings or Bluetooth pairing.
음질이 좋지 않음
  • 잘못된 배선 극성
  • 손상된 스피커 콘
  • Improper audio source settings
  • Verify audio wiring polarity.
  • Inspect speaker cone for damage.
  • Adjust equalizer or tone controls on your audio source.

8. 사양

Detailed technical specifications for the MX CS-4 L Ceiling Speaker with LED Light:

특징사양
모델명MX CS-4 L
장착 유형천장 마운트
스피커 유형요소
스피커 크기4 인치
재료ABS, 아크릴로니트릴 부타디엔 스티렌
특징LED Light (White LED Bulb 5 Watt)
임피던스8옴
Sensitivity (db)90데시벨
스피커 최대 출력 전력25 와트
주파수 응답50Hz
연결 기술블루투스
제어 방법
호환 장치Amplifier, Audio Receiver, Mixer, Public Address System
전원DC (for speaker), AC 220V (for LED)
품목 무게3700 Grams (approx. 3.7 kg)
원산지인도

9. 보증 정보

This MX product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your purchase receipt as proof of purchase for any warranty claims.

For details regarding extended warranty options, please refer to the information provided at the time of purchase or contact customer support.

10. 고객 지원

For technical assistance, troubleshooting, or warranty inquiries, please contact MX customer support:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.