JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

  • JEYI M.2 NVMe SSD Enclosure
  • 열 패드
  • 드라이버
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • 매는 밧줄
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

설치 지침

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. 포장재를 준비하세요: Gently slide open the enclosure to reveal the internal PCB.
  2. 써멀 패드를 부착하세요: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. NVMe SSD를 삽입하세요: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. SSD를 보호하세요: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. 인클로저를 닫습니다. Carefully slide the enclosure cover back into place until it clicks securely.
폭발했다 view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

작동 지침

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. 장치에 연결: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. 전원 표시기: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. 데이터 전송: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

유지

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • 열 관리: 알루미늄 casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • 청소: 케이스 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제 사용은 피하십시오.
  • 저장: 사용하지 않을 때는 케이스를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
  • 케이블 관리: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

문제 해결

문제가능한 원인해결책
Enclosure not detected by computer.
  • 케이블 연결이 느슨합니다.
  • SSD가 제대로 설치되지 않았습니다.
  • SSD가 초기화/포맷되지 않았습니다.
  • USB 포트 또는 케이블에 문제가 있습니다.
  • 케이블이 단단히 연결되어 있는지 확인하십시오.
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • 다른 USB 포트나 케이블을 사용해 보세요.
데이터 전송 속도가 느립니다.
  • 속도가 느린 USB 포트(예: USB 2.0)에 연결되어 있습니다.
  • Thermal throttling due to high temperature.
  • SSD 성능 제한.
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • Verify your NVMe SSD's rated speed.
Enclosure gets very hot.
  • 대용량 데이터 전송 중에도 정상적으로 작동합니다.
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casing는 열을 발산합니다.
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

명세서

특징세부 사항
모델I9-Seal
상표제이
하드웨어 인터페이스USB 3.2 2세대(USB-C)
데이터 전송 속도최대 10Gbps
호환 가능한 SSD 유형NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
최대 저장 용량4테라바이트
칩셋JMS583 A3
특징UASP Support, TRIM Support, Win to Go (WTG) Support
재료알루미늄 합금
색상은
제품 치수4.06 x 1.02 x 0.39인치(103 x 26 x 10mm)
품목 무게0.317 온스(9그램)
호환되는 운영 체제윈도우, macOS, 리눅스, iOS, 안드로이드
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

보증 및 지원

For warranty information or technical support, please refer to the official JEYI web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구체적인 보증 기간 및 지원 채널에 대한 자세한 정보는 일반적으로 구매 서류 또는 제조업체 웹사이트에 제공됩니다. web대지.

제조업체: 제이

Web대지: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.