Generic 10.4 Inch Embedded Resistive Touch Industrial All-in-one Computer User Manual

1. 서론

This manual provides instructions for the installation, operation, and maintenance of your 10.4 Inch Embedded Resistive Touch Industrial All-in-one Computer. This device features resistive touchscreen technology, offering single-touch, pressure-sensing control with a theoretical lifespan of over 50 million clicks. It is equipped with Mohs grade 7 explosion-proof glass and is designed to operate within a temperature range of -20°C to 60°C.

The computer's display offers a brightness of 250-350 cd/m² and a contrast ratio of 1000:1. It comes with a power adapter (Input: 100-250VAC, Output: DC 12V 5A) and supports various plug types (AU, EU, USA, UK). The default operating system is Windows 10 Pro, with Windows 7 or Linux available as optional installations.

그림 1: 전면 view of the computer showcasing its slim design and embedded installation capability, with Windows 10 operating system.

2. 상자 안에 무엇이 들어있나요?

포장을 뜯으신 후 모든 구성품이 있는지, 손상되지 않았는지 확인해 주십시오. 패키지에는 다음 구성품이 포함되어 있어야 합니다.

• 1 x 10.4 Inch Embedded Resistive Touch Industrial All-in-one Computer
• 1 x Power Adapter (with appropriate regional plug)
• Mounting hardware (for embedded or wall mount installation)

3. 설정

Follow these steps to set up your industrial all-in-one computer:

1. 짐 풀기: Carefully remove the computer and all accessories from the packaging. Retain packaging for future transport or storage.
2. 설치: Determine your preferred installation method. The unit supports embedded and wall-mount installations. Use the provided mounting hardware to secure the computer in place. Ensure the mounting surface is stable and can support the device's weight.

Figure 2: Reference for installation methods, demonstrating how the unit can be embedded or secured with screws.

3. 주변 장치 연결: Connect necessary peripherals such as a keyboard, mouse, or external display to the available ports. The unit features multiple interfaces including HDMI, USB (USB1, USB2), VGA, LAN, and Audio ports.

그림 3: 이상view of the multiple interfaces available on the rear panel for various connectivity requirements.

4. 전원 연결: Connect the provided DC 12V 5A power adapter to the DC12V input port on the computer, then plug the adapter into a suitable power outlet.

4. 사용 설명서

This section outlines the basic operation of your industrial all-in-one computer.

• 전원 켜기/끄기: Locate the power button, typically on the side or rear panel. Press it once to power on the device. To power off, use the operating system's shutdown function. For a forced shutdown, press and hold the power button for several seconds.
• 터치스크린 작동: The resistive touchscreen supports single-point touch input. Apply gentle pressure with your finger or a stylus to interact with the display.

Figure 4: User interacting with the resistive touchscreen display.

• 운영 체제: The computer comes pre-installed with Windows 10 Pro. Familiarize yourself with the operating system's interface and functions.

5. 유지관리

Proper maintenance ensures the longevity and optimal performance of your industrial computer.

• 청소: 부드러운 d를 사용하세요amp cloth to clean the screen and exterior surfaces. Avoid abrasive cleaners or solvents that could damage the display or finish. Ensure the device is powered off and unplugged before cleaning.
• 통풍: The unit is designed with ventilation to dissipate heat. Ensure that the ventilation openings on the back panel are not obstructed to prevent overheating.

Figure 5: Rear panel with ventilation design for efficient heat management.

• 환경 조건: Operate the computer within the specified temperature range of -20°C to 60°C. Avoid exposing the device to extreme humidity or direct sunlight.

6. 문제 해결

If you encounter issues with your industrial computer, refer to the following common troubleshooting steps:

• 전원 없음:
  • Check if the power adapter is securely connected to both the computer and the power outlet.
  • 다른 장치를 연결하여 전원 콘센트가 작동하는지 확인하세요.
• 디스플레이 없음:
  • 컴퓨터의 전원이 켜져 있는지 확인하세요.
  • If an external monitor is connected, check its power and cable connections.
• 터치스크린이 반응하지 않음:
  • 컴퓨터를 다시 시작합니다.
  • 화면이 깨끗하고 이물질이 없는지 확인하세요.
• 시스템 속도 저하:
  • 불필요한 응용프로그램을 닫으세요.
  • SSD에 충분한 여유 공간이 있는지 확인하세요.

7. 사양

Detailed technical specifications for the 10.4 Inch Embedded Resistive Touch Industrial All-in-one Computer (Model YTKK104DZ).

Figure 6: Detailed dimensional drawing of the 10.4-inch industrial computer.

8. 보증 및 지원

보증: 이 제품에는 다음이 포함되어 있습니다. 1년 보증 구매일로부터. 보증 청구를 위해 구매 증빙을 보관하세요.

지원하다: For technical assistance, troubleshooting, or inquiries regarding customization options (such as screen size, interface type, power supply, or installation methods), please contact the manufacturer. Customization inquiries can be sent via email to: Slubee-zzl@outlook.com.