소개
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your UNICOO Crank Adjustable Height Standing Desk, model NTCSET-01. This desk is designed to offer a versatile workspace, allowing seamless transitions between sitting and standing positions to promote a healthier work environment. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Image: The UNICOO Crank Adjustable Height Standing Desk, featuring an antique oak desktop and a gray frame with a manual crank handle.
중요한 안전 정보
- 적절한 고정: Ensure the desk is placed on a stable, level surface. If necessary, anchor the desk to a wall to prevent tipping, especially when adjusted to higher positions or if heavy items are placed on it.
- 중량 제한: Do not exceed the maximum weight capacity of 150 lbs (68 kg). Overloading the desk can cause instability and damage.
- Height Adjustment Caution: Exercise caution when adjusting the desk height. Keep hands and fingers clear of moving parts, especially the crank mechanism and telescoping legs, to prevent pinching or injury.
- 어린이와 애완동물: 책상 높이를 조절하는 동안 사고를 예방하기 위해 어린이와 반려동물이 책상에 가까이 가지 않도록 하십시오.
- 케이블 관리 : Ensure all cables connected to devices on the desk have sufficient slack to accommodate height changes. Improper cable management can lead to equipment damage or tripping hazards.
- 집회: Follow all assembly instructions carefully. Incorrect assembly can compromise the desk's stability and safety.
패키지 내용
조립을 시작하기 전에 아래 나열된 모든 구성품이 포함되어 있고 손상되지 않았는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.
- Desktop (Antique Oak)
- 책상 프레임 (합금강)
- 크랭크 핸들
- 조절 가능한 발
- USB 충전 포트
- 무선 충전기
- Headphone Hook (Optional installation)
- 조립 하드웨어(나사, 볼트 등)
- 조립 도구
- 사용 설명서
조립 설명서
Assembly typically requires two people and takes approximately 1.5 hours. All necessary tools are included. Follow these steps carefully:
- 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼내어 흠집이 생기지 않도록 깨끗하고 부드러운 표면에 펼쳐 놓으십시오. 포장 내용물 목록과 모든 부품이 일치하는지 확인하십시오.
- 책상 프레임 조립: Attach the crossbars to the lifting columns using the provided hardware. Ensure all connections are secure.
- 발 부착: Secure the adjustable feet to the bottom of the lifting columns. These feet can be adjusted later for leveling the desk.
- 바탕 화면 마운트: Carefully place the desktop upside down on a soft surface. Align the assembled frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the provided screws.
- Install Crank Handle: Insert the crank handle into its designated slot on the desk frame. Ensure it engages properly.
- Install USB/Wireless Charger: Integrate the USB and wireless charging components into their respective openings on the desktop. Connect any necessary wiring according to the detailed diagram in the separate assembly guide (if provided).
- Attach Headphone Hook (Optional): The headphone hook can be installed on either side of the desk frame. Choose your preferred location and secure it with the provided hardware.
Image: Diagram illustrating the flexible installation options for the headphone hook on the desk frame.
- 케이블 관리 : Utilize any integrated cable management features or accessories to organize power cords and device cables.
- 최종 배치 및 레벨 조정: Carefully flip the desk upright and place it in its desired location. Adjust the leveling feet to ensure the desk is stable and does not wobble.
이미지: 폭발된 view highlighting key features such as rounded corners, a take-up box, hook design, foldable handle, and adjustable feet.
작동 지침
책상 높이 조정
The UNICOO NTCSET-01 desk features a manual crank system for height adjustment. This allows for smooth and precise transitions between sitting and standing positions.
- Locate the Crank Handle: The crank handle is typically located on the side of the desk frame.
- Rotate to Adjust: Turn the crank handle clockwise to raise the desk and counter-clockwise to lower it. Apply steady, even pressure.
- Desired Height: Adjust the desk to your preferred ergonomic sitting or standing height. The desk can be adjusted from 28 inches (71 cm) to 45.3 inches (115 cm).
- 접이식 손잡이: The crank handle is foldable for convenience when not in use.
Image: Illustration demonstrating the height adjustment range of the desk from 27.5 inches to 45.3 inches.
Using USB and Wireless Charging
The desk is equipped with integrated USB and wireless charging capabilities for your convenience.
- 무선 충전: Place your Qi-compatible device directly onto the designated wireless charging pad on the desktop. Ensure the device is centered for optimal charging.
- 입력: 5V / 2A
- Output: 5V / 1A (5W)
- USB 충전: Connect your device's USB cable to the USB port integrated into the desktop.
- 입력: 5V / 2A
- Output: 5V / 1.5-2A
이미지: 클로즈업 view of the integrated wireless charging pad and USB charging port on the desktop, with input/output specifications.
유지
- 청소: 데스크탑과 프레임은 부드러운 천으로 닦아주세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 강한 화학 물질은 피하세요.
- 정기 점검: 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- Crank Mechanism: The crank mechanism is designed for durability. If it feels stiff, ensure no obstructions are present. Do not force the crank.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 책상이 흔들리거나 불안정합니다. | Uneven floor; loose assembly screws; desk legs too far apart. | Adjust the leveling feet at the bottom of the desk. Check and tighten all assembly screws. Ensure desk legs are positioned correctly and not excessively spread. |
| Crank mechanism is stiff or difficult to turn. | Obstruction in the mechanism; internal issue. | Inspect for any visible obstructions. Do not force the crank. If the issue persists, contact customer support. |
| 무선 충전이 작동하지 않습니다. | Device not Qi-compatible; device not centered; foreign objects on pad. | Ensure your device supports Qi wireless charging. Reposition the device to be centered on the charging pad. Remove any metal objects or thick cases. |
| USB 충전이 작동하지 않습니다. | Loose connection; faulty cable; device issue. | Check the USB cable connection at both ends. Try a different USB cable or device to isolate the problem. |
명세서
| 모델 번호 | NTCSET-01 |
| 상표 | UNICOO |
| 제품 크기(D x W x H) | 23.6"D x 43.3"W x 45.3"H (59.9cm D x 109.9cm W x 115.1cm H) |
| 최소 높이 | 28인치(71cm) |
| 최대 높이 | 45.3인치(115cm) |
| 품목 무게 | 59파운드(26.7kg) |
| 최대 중량 권장 사항 | 150파운드(68kg) |
| 상단 재료 유형 | Engineered Wood (MDF with scratch-resistant laminate) |
| 기본 소재 | 합금강(Q235) |
| 마무리 유형 | Powder Coat Paint Finish (Steel), Laminate (Desktop) |
| 색상 | Antique Oak (Desktop), Black (Base) |
| 무선 충전기 출력 | 5V / 1A (5와트) |
| USB 충전기 출력 | 5V / 1.5-2A |
| 조립이 필요합니다 | 예 |
| 조립 권장 인원 | 2 |
Image: Detailed dimensions of the UNICOO standing desk, showing width, depth, and height ranges.
보증 및 지원
The UNICOO Crank Adjustable Height Standing Desk, model NTCSET-01, comes with a 한정 보증 covering parts and labor for manufacturing defects. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, missing parts, or warranty claims, please contact UNICOO customer support through the retailer where the product was purchased or visit the official UNICOO web연락처 정보 사이트.
온라인 리소스: For additional support and frequently asked questions, please visit the UNICOO brand store: UNICOO Brand Store