리소니아 라이팅 CPANL 1x4 LED 평면 패널 조명 사용 설명서

1. 소개 및 이상view

The Lithonia Lighting CPANL LED Flat Panel Light is designed for modern, energy-efficient illumination in various indoor spaces. This fixture offers versatile lighting options with switchable color temperature and dimming capabilities.

주요 특징:

• 색온도(CCT) 전환 가능: Easily select between 3500K (Neutral), 4000K (Cool), and 5000K (Daylight) to suit different environments and preferences.
• 에너지 효율적인 LED: Utilizes long-life LEDs and a high-efficiency driver for superior illumination and reduced energy consumption.
• 밝기 조절 가능: Compatible with Triac dimmer switches for additional energy savings and adjustable light levels.
• 다양한 설치: Includes integral T-Bar clips for T-Grid ceilings and a Direct Ceiling Mount Kit (DCMK 14) for surface mounting.
• Durable and Certified: d에 대해 인증됨amp locations, CSA, IC, and DLC, ensuring long life and high durability with over 60,000 hours of performance.

This image displays the sleek, rectangular design of the Lithonia Lighting CPANL 1x4 LED Flat Panel Light, suitable for various ceiling installations.

A banner showcasing the Lithonia Lighting CPANL LED Flat Panel Light, highlighting its modern design and application.

2. 설정 및 설치

Installation of the CPANL LED Flat Panel Light is designed to be straightforward. Always ensure power is off at the circuit breaker before beginning any electrical work.

안전 예방 조치:

• 설치하기 전에 반드시 회로 차단기에서 전원을 차단하십시오.
• Wear appropriate Personal Protective Equipment (PPE), including safety glasses and gloves.
• 모든 전기 연결은 지역 및 국가 전기 규정을 준수해야 합니다.

필요한 도구:

• 사다리
• 줄자
• Phillips 헤드 스크루 드라이버
• 일자 드라이버
• 전선 스트리퍼
• Drill with appropriate bits (e.g., 1/2-inch for drywall toggle bolts)
• 연필/마커

Installation Steps (Direct Ceiling Mount):

1. Turn off power at the breaker and put on correct PPE.
2. Assemble the Direct Ceiling Mount Kit (DCMK 14) by attaching the hanger center bracket to the side brackets using the provided screws. Do not overtighten.
3. Hold the assembled DCMK bracket against the ceiling at the desired location, ensuring it is square. Mark the four mounting locations for drilling.
4. Drill 1/2-inch holes at the marked locations for drywall ceilings.
5. Insert the toggle bolts through the hanger brackets and push them through the drilled holes in the ceiling. Tighten the bolts with a power drill until the brackets are securely attached and flush with the ceiling.
6. Locate the hinge points on the CPANL fixture. Position the panel with the hinges away from you.
7. Bring the hinge side of the panel up to the receiving tabs on the hanger brackets. Insert both receiving tabs through the slots in the hinge brackets and slide them past the locking springs until an audible click is heard. This secures the hinge side.
8. Make all electrical connections (line, neutral, ground) according to local code in the junction box.
9. Gently push the CPANL toward the hinges to fully seat it in the back of the bracket. Rotate the latch side of the fixture up towards the ceiling. Ensure the locking feature on the latch tab clears the opening in the hanger bracket.
10. Rotate the latches into the closed position. The latch tabs should be flush against the side of the CPANL.
11. If any tether is sticking out, push it so it lays on top of the panel.
12. Gently lower the CPANL to ensure the latches are engaged.

This image illustrates the various components of the CPANL LED Flat Panel Light, including the rigid backplate, integrated driver, switchable color temperature mechanism, and the Direct Ceiling Mount Kit (DCMK).

A visual guide detailing the five main steps for installing the CPANL LED Flat Panel Light, from turning off power to securing the panel.

3. 사용 설명서

The CPANL LED Flat Panel Light offers adjustable settings for both color temperature and brightness to customize your lighting experience.

색온도(CCT) 조정:

The fixture features a switch to select between three color temperatures: 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). This switch is located on the back of the fixture, accessible during installation or by carefully unlatching the panel.

This guide illustrates the visual difference between 3500K Neutral White, 4000K Cool White, and 5000K Daylight color temperatures available on the CPANL LED Flat Panel Light.

디밍 기능:

The CPANL LED Flat Panel Light is Triac dimmable. To utilize the dimming feature, ensure the fixture is connected to a compatible Triac dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for operation.

This graphic visually represents different lumen output levels, indicating the brightness range of the LED panel when dimmed or at full power.

4. 유지관리

The Lithonia Lighting CPANL LED Flat Panel Light is designed for long-term, maintenance-free operation due to its integrated, long-life LEDs.

청소:

• 청소하기 전에 전원이 차단되었는지 확인하세요.
• Wipe the exterior surfaces of the fixture with a soft, damp 옷감.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.

LED 수명:

The LEDs in this fixture are designed to last over 60,000 hours with more than 70% lumen maintenance, meaning no bulb replacement is necessary under normal operating conditions.

5. 문제 해결

If you encounter issues with your CPANL LED Flat Panel Light, refer to the following common troubleshooting steps:

이러한 단계를 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

6. 사양

This image provides a visual representation of the dimensions for the Lithonia Lighting CPANL 1x4 LED Flat Panel Light, showing its length, width, and slim profile.

7. 보증

This Lithonia Lighting CPANL LED Flat Panel Light is backed by a 5년 제한적 제조사 보증. For detailed information regarding warranty terms and conditions, please refer to the official warranty documentation provided with your product or visit the Lithonia Lighting web대지.

8. 지원

For any further questions, technical assistance, or support regarding your Lithonia Lighting CPANL LED Flat Panel Light, please contact the Acuity Brands Technical Support Team:

전화: 1-800-705-SERV(7378)