SHELL Electric Vehicle Charger User Manual
Model: SEV-40-01
1. 서론
Thank you for choosing the SHELL Electric Vehicle Charger. This Level 2 (40 Amps, 240V) EV charger is designed to provide fast and efficient charging for your electric vehicle, up to 7 times faster than a standard wall outlet (Level 1). This manual provides essential information for the safe and effective use of your new EV charger, including setup, operation, maintenance, and troubleshooting.
Figure 1: SHELL Level 2 40 Amp EV Charger with 30ft cable and protective case.
2. 안전 정보
Your safety is paramount. Please read and understand all safety instructions before operating the charger. For detailed safety guidelines, refer to the official Safety Information PDF document provided with your product or available online.
- Ensure the charger is connected to a properly grounded NEMA 14-50R receptacle.
- 케이블이나 커넥터가 손상된 경우 충전기를 사용하지 마세요.
- 어린이와 애완동물이 충전 구역에 접근하지 못하도록 하세요.
- The charger is rated IP66 for water and dust resistance, suitable for indoor and outdoor use. However, avoid submerging the unit in water.
- The charger features S-PROTECH technology for smart and safe charging, including protection against short-circuit, current leakage, grounding, thermal, over-charge, and over-current.
Figure 2: The charger is designed for safe use in various weather conditions, including rain and snow, with an IP66 waterproof rating.
3. 상자 안에 무엇이 들어있나요?
Upon opening your SHELL EV Charger package, you should find the following components:
- SHELL Portable Electric Vehicle Charger (Level 2) with 30ft cable and SAE J1772 connector
- NEMA 14-50R Plug (integrated with the charger cable)
- NEMA 5-15P (110V) to 14-50R Adapter
- Tailored Protective Case
- 사용자 가이드(이 매뉴얼)
Figure 3: Components included in the SHELL EV Charger package.
4. 설정
The SHELL EV Charger is designed for easy plug-and-charge operation with no complex installation required. It can be used for both home and portable charging.
4.1 전원 연결
- 레벨 2(240V) 충전의 경우: Plug the NEMA 14-50R plug directly into a dedicated 240V NEMA 14-50R receptacle. Ensure the receptacle is properly installed and grounded by a qualified electrician.
- 레벨 1(110V) 충전의 경우: Use the included NEMA 5-15P to 14-50R adapter. Connect the charger's NEMA 14-50R plug to the adapter, then plug the adapter into a standard 110V residential outlet (NEMA 5-15). Note that charging speed will be significantly slower at 110V.
Figure 4: The charger is compatible with both 240V NEMA 14-50R outlets and 110V NEMA 5-15 outlets using the provided adapter.
4.2 배치
The charger's 30ft cable provides flexibility for placement. Position the charger unit in a location that is easily accessible and allows the cable to reach your vehicle's charging port without excessive tension or kinking. The unit can be wall-mounted if desired, but it is also designed for portable use with its protective case.
Figure 5: The portable EVA protection case allows for convenient transport and charging on-the-go.
5. 사용 설명서
5.1 차량에 연결하기
The SHELL EV Charger is compatible with all electric vehicles and plug-in hybrids that use the SAE J1772 connector. For Tesla vehicles, an additional J1772-to-Tesla adapter (not included) is required.
- Ensure the charger is properly plugged into a power outlet (240V or 110V).
- 차량의 충전 포트를 여세요.
- Firmly insert the SAE J1772 charging gun into your vehicle's charging port until it clicks into place.
- The charger will automatically begin charging, and the LCD display will show the charging status.
Figure 6: The charger is 100% compatible with all electric vehicles using the SAE J1772 standard.
5.2 LCD 디스플레이 이해
The charger features an LCD display that provides real-time charging information, including:
- 입력 Voltag전자 (V)
- 현재의 (Amps)
- 전력(kW)
- 충전된 에너지량(kWh)
- 충전 시간
- 내부 온도
Figure 7: The LCD display provides comprehensive charging status at a glance.
5.3 Adjusting Charging Current (Smart vs. Manual Mode)
The charger allows you to adjust the charging current to optimize charging speed or battery life. This adjustment should be made ~ 전에 connecting the charger to your vehicle.
- Auto Mode (Smart Mode): This is the default setting. The charger will automatically maximize the output current (up to 40A) to shorten charging time.
- 수동 모드: Press the 'A' button on the charger unit to cycle through available current settings (e.g., 12A, 16A, 24A, 32A, 40A). Select a customized constant current for longer charging time, which can contribute to better battery life.
5.4 충전 예약
You can schedule the start or finish time of your charging session to take advantag비수요 시간대 전기 요금.
- Press the 'Clock' button on the charger unit to set a delay in charge start time (increments of whole hours).
- The charger will automatically cut off power when the vehicle battery is fully charged.
Figure 8: Utilize the scheduling feature to charge your EV during off-peak hours, saving on electricity costs.
6. 유지관리
Proper maintenance ensures the longevity and safe operation of your SHELL EV Charger.
- 청소: 충전기 본체와 케이블을 부드러운 천으로 닦으세요.amp 천을 사용하십시오. 강한 화학 물질이나 연마성 세제는 사용하지 마십시오. 청소하기 전에 장치의 플러그를 뽑으십시오.
- 저장: When not in use, store the charger in its tailored protective case in a dry, cool place. Avoid coiling the cable too tightly to prevent damage.
- 점검: Regularly inspect the charging cable, plug, and charging gun for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact customer support.
- 환경 보호: The charger is IP66 rated, meaning it is 'dust tight' and protected against powerful jets of water. It is suitable for both indoor and outdoor use.
7. 문제 해결
If you encounter issues with your SHELL EV Charger, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Charger not starting/no power. | Not properly plugged in; power outlet issue; internal fault. | Ensure the NEMA 14-50R plug (or 110V adapter) is fully inserted into the outlet. Check the circuit breaker. If the issue persists, contact support. |
| Charging fault/error message on vehicle. | Improper connection to vehicle; vehicle compatibility issue; charger fault. | Ensure the J1772 connector is fully and securely inserted into the vehicle's port. For Tesla, confirm the J1772-to-Tesla adapter is correctly used. Try unplugging and re-plugging the charger from both the wall and the car. If the issue persists, contact support. |
| Charging slower than expected. | Using 110V outlet; current setting is too low; vehicle's charging limit. | Ensure you are using a 240V NEMA 14-50R outlet for maximum speed. Check the current setting on the charger and adjust to a higher amperage if safe and desired (before connecting to vehicle). Note that some vehicles may limit charging speed. |
| Charger unit feels warm. | Normal operation; high ambient temperature; prolonged high-current charging. | It is normal for the charger to generate some heat during operation. The S-PROTECH technology includes thermal protection. If it feels excessively hot or an overheating warning appears, disconnect immediately and allow it to cool. Ensure adequate ventilation around the unit. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SEV-40-01 |
| 입력 Voltage | 240 Volts (compatible with 110V via adapter) |
| Amp에라 지 | 40 Amps(조정 가능) |
| 커넥터 유형 | SAE J1772 |
| 케이블 길이 | 30피트(9.1m) |
| 침투 방지(IP) 등급 | IP66 (dust tight, protected against powerful water jets) |
| 품목 무게 | 20.6파운드(약 9.34kg) |
| 패키지 크기 | 20 x 16.5 x 5.5 인치 |
| 특별 기능 | Fast Charging, Portable, Waterproof, Adjustable Current, Schedule Timer, S-PROTECH Safety Technology |
9. 보증 및 지원
SHELL is committed to providing high-quality products and excellent customer service.
- 보증: Please refer to the product packaging or official SHELL web구체적인 보증 약관은 해당 사이트에서 확인하세요.
- 반품 및 교환: SHELL offers hassle-free replacement and return services.
- 고객 서비스: For any questions, technical support, or warranty claims, please contact our customer service hotline.
Customer Service Hotline: Mon - Fri, 9AM - 5PM EST
그림 9: 저희 전담 고객 지원팀이 언제든지 도와드릴 준비가 되어 있습니다.