소개
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
안전 정보
화재, 감전 및 부상 위험을 줄이기 위해 전기 제품을 설치하거나 사용할 때는 항상 기본적인 안전 수칙을 준수하십시오.
- 전원 끄기 : Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- 실내에서만 사용 가능: 이 lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- 올바른 기준: l을 확인하세요amp holder is compatible with an E27 base.
- 권tage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lamp의 요구 사항입니다.
- 비조광: 이 lamp is not dimmable. Do not use it with dimmer switches.
- 눈의 편안함: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
패키지 내용
패키지에는 다음이 포함되어 있습니다:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
설치 지침
- 전원 끄기: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- 이전 L 제거amp: Carefully unscrew and remove the existing lamp from the E27 lamp 보유자.
- 새로운 L 설치amp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- 위치: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- 복원력 : Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
작동 지침
이 필립스 LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- 자동 켜기/끄기: 난amp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- 일광 센서: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- 모션 센서: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- 조명 품질: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
유지
The Philips LED Lamp with Sensor requires minimal maintenance.
- 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 바닥을 닦으십시오.amp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- 센서 영역: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Lamp 켜지지 않습니다. |
|
|
| Lamp 꺼지지 않습니다. |
|
|
| Sensor sensitivity seems low. |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 필립스 |
| 모델 번호 | 929002058731 |
| 빛의 종류 | 주도의 |
| 왓tage | 8와트 |
| 백열등가 | 60와트 |
| Lamp 베이스 | E27 |
| 밝은 색상 | 따뜻한 흰색 |
| 색온도 | 2700 켈빈 |
| 광속 | 806루멘 |
| 권tage | 100-240 볼트 |
| 빈도 | 50 헤르츠 |
| 특별 기능 | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| 실내/실외 사용 | 실내 |
| 수명 | 15,000시간 |
| 치수 (H x W) | 12.2cm x 6.25cm |
| 재료 | 플라스틱 |
보증 및 지원
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
온라인 지원: 방문하다 www.philips.com/support FAQ 및 연락처 옵션은 여기에서 확인하세요.