소개
This manual provides essential information for the safe and efficient operation of your APC Back-UPS Pro Gaming UPS, model BGM1500B. This Uninterruptible Power Supply (UPS) is designed to protect your gaming console, PC, and other electronic equipment from power outages, 서지, 그리고 볼륨tage fluctuations, ensuring continuous power and data integrity.
안전 정보
Read these instructions carefully before installing or operating the unit. Save this manual for future reference.
- 전기 안전: UPS는 접지된 콘센트에만 연결하십시오. 접지 단자를 제거하지 마십시오.
- 배터리 안전: The battery is user-replaceable. Refer to the maintenance section for proper replacement procedures. Do not dispose of batteries in a fire; they may explode.
- 놓기: Install the UPS indoors in a protected area, away from excessive moisture, heat, or conductive contaminants. Ensure adequate airflow around the unit.
- 초과 적재: Do not overload the UPS. Ensure the total power draw of connected equipment does not exceed the UPS's capacity (900W).
패키지 내용
패키지에 다음 품목이 포함되어 있는지 확인하십시오.
- APC Back-UPS Pro Gaming UPS (Model BGM1500B)
- USB 통신 케이블
- 동축 케이블
- 사용자 설명서 및 안전 정보
제품 특징
The APC Back-UPS Pro Gaming UPS BGM1500B offers advanced features for power protection and convenience:
- 1500VA / 900W Sine Wave Output: Provides clean and stable power, ideal for sensitive electronics and Active PFC power supplies.
- 대화형 LCD 디스플레이: Features a Reactor Circle that changes color to indicate power status, surges, dips, and remaining battery power.
- Customizable RGB Ambient LED Lighting: Personalize the look of your UPS to match your gaming setup.
- 10 Total Outlets: Includes 6 battery backup outlets and 4 surge-only outlets for comprehensive protection.
- 3개의 USB 충전 포트: Two Type-A and one Type-C port (5V/3A shared) for convenient device charging.
- 자동 볼륨tage 규정(AVR): Corrects high and low voltage fluctuations without using battery power, preserving battery life.
- Surge-Protected Dataline Ports: 1 Gb dataline ports and gold-plated co-axial ports protect network and cable connections.
- Hot-Swappable, User-Replaceable Battery: Allows for easy battery replacement without powering down connected equipment.
그림 1: 전면 view of the APC Back-UPS Pro Gaming UPS BGM1500B, showcasing the interactive LCD display and overall design.
Video 1: An official video from APC highlighting the key features and benefits of the APC Back-UPS Pro Gaming UPS.
설정
1. 배터리 연결
The UPS is shipped with the battery disconnected for safety. Before use, you must connect the internal battery.
- UPS를 안정된 표면에 놓으세요.
- Locate the battery access panel, typically on the side or bottom of the unit.
- 배터리함에 접근하려면 패널을 제거하세요.
- Connect the red battery cable to the red terminal. Ensure a secure connection.
- Replace the battery access panel.
2. 배치
Choose a suitable location for your UPS:
- 직사광선, 열원 및 습도가 높은 곳을 피하십시오.
- Ensure proper ventilation by keeping at least 1 inch (2.5 cm) of space around the unit.
- UPS를 평평하고 안정적인 표면에 놓으십시오.
3. 장비 연결
Connect your devices to the appropriate outlets on the rear of the UPS.
Figure 2: Rear panel of the UPS, illustrating the battery backup and surge-only outlets, data ports, and circuit breaker.
- Battery Backup + Surge Protected Outlets: These 6 outlets provide power from the battery during outages and protect against surges. Connect your critical equipment such as your gaming PC, console, monitor, and external hard drives here.
- 서지 전용 콘센트: These 4 outlets provide surge protection but no battery backup. Connect less critical devices like printers, speakers, or lamp여기 있어요.
- USB 충전 포트: Use the two USB-A and one USB-C ports on the side of the unit to charge mobile devices, controllers, or other USB-powered accessories.
- 데이터 회선 보호: Connect your network cable (RJ45) and coaxial cable to the respective IN and OUT ports for surge protection on your data lines.
4. 초기 충전
After connecting the battery and plugging the UPS into a wall outlet, allow the unit to charge for at least 16 hours before connecting any equipment. This ensures the battery is fully charged and ready to provide maximum runtime.
5. PowerChute Personal Edition Software (Optional)
For advanced monitoring and management features, install the PowerChute Personal Edition software on your PC. Connect the UPS to your computer using the provided USB communication cable. The software allows you to:
- Monitor power events and energy consumption.
- Configure alarms and notifications.
- Perform automatic and safe shutdown of your computer during extended power outag에스.
UPS 작동
1. 전원 켜기/끄기
- 전원을 켜려면: Press the power button located on the top panel. The LCD display will illuminate.
- 전원을 끄려면: 기기가 꺼질 때까지 전원 버튼을 길게 누르세요.
2. LCD Display and Reactor Circle
그림 3: 상단 view of the UPS, highlighting the LCD display and control buttons for easy interaction.
The interactive LCD display provides real-time information about the UPS status. The Reactor Circle around the display changes color to indicate different operational states:
- 녹색: Normal operation, providing power.
- 노란색/주황색: Warning, indicating a power event (e.g., voltage fluctuation) or low battery.
- 빨간색: Critical alert, indicating a significant issue or very low battery.
Use the navigation buttons next to the LCD to cycle through various display screens, showing information such as input/output voltage, 로드 퍼센트tag예: 배터리 충전량 및 예상 작동 시간.
3. 사용자 정의 가능한 RGB 조명
The ambient LED lighting can be customized to match your preference. Refer to the specific controls on the unit or the PowerChute software for options to change colors and lighting effects.
4. USB 충전
그림 4: 측면 view of the UPS, showing the convenient USB-A and USB-C charging ports.
The USB ports provide 5V/3A shared power for charging devices. These ports are always active when the UPS is powered on, regardless of battery backup status.
유지
1. 배터리 교체
The battery in your UPS has an average life of 4 years. When the battery needs replacement, the UPS will indicate this on the LCD display. The replacement battery part number is APCRBC163.
- Ensure the UPS is powered off and disconnected from the wall outlet.
- Remove the battery access panel.
- Disconnect the battery cables (black first, then red).
- Carefully slide out the old battery.
- Insert the new battery (APCRBC163).
- Connect the battery cables (red first, then black).
- Replace the battery access panel.
- Recycle the old battery responsibly.
2. 청소
Periodically clean the exterior of the UPS with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris.
문제 해결
무정전 전원 공급 장치(UPS)에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | 배터리가 연결되지 않았거나 충전량이 부족합니다. | Ensure battery cables are securely connected. Charge the UPS for 16 hours. |
| UPS에서 자주 경고음이 울립니다. | On battery power, low battery, or overload | Check utility power. Reduce connected load. Allow battery to recharge. |
| LCD shows 'Overload' | Too many devices connected to battery backup outlets | 필수적이지 않은 장비는 배터리 백업 콘센트에서 분리하십시오. |
| Building Wiring Fault indicator is lit | Wiring problem in the wall outlet | 자격을 갖춘 전기 기술자에게 건물 배선을 점검받으십시오. |
명세서
Key technical specifications for the APC Back-UPS Pro Gaming UPS BGM1500B:
- 모델: BGM1500B
- 용량: 1500VA / 900W
- 입력 Voltage: 120 볼트
- 출력 볼륨tage: 120 볼트
- 파형 : 사인파
- 배터리 유형: 밀봉형 납산
- 배터리 충전 시간: 16시간
- 배터리 평균 수명: 4년
- 서지 보호 등급: 1080 줄
- 매장 수: 10개 (배터리 백업 + 서지 보호 6개, 서지 보호 전용 4개)
- USB 충전 포트: A형 포트 2개, C형 포트 1개 (5V/3A 공유)
- 치수(D x W x H): 16.06" x 4.13" x 11.45"(40.8cm x 10.5cm x 29.1cm)
- 무게: 25.35파운드(11.5kg)
- 작동 온도: 화씨 32도에서 화씨 104도(섭씨 0도에서 40도)
- 인증: 에너지 스타
보증 및 지원
This APC Back-UPS Pro Gaming UPS BGM1500B comes with a 3년 제조업체 보증. For warranty claims, technical support, or further assistance, please contact APC customer service or visit the official APC website. Ensure you have your product model number and serial number available when contacting support.
최신 지원 정보 및 자료는 다음 웹사이트를 방문하세요. www.apc.com/support