IK Multimedia AXE I/O SOLO USB Audio Interface User Manual

1. 서론

The IK Multimedia AXE I/O SOLO is a premium 2-in/3-out USB audio interface designed for guitarists and musicians. It offers high-resolution 24-bit, 96 kHz audio conversion, advanced guitar tone shaping features, and comes bundled with powerful software like AmpliTube 5 SE and TONEX SE. This manual provides detailed instructions for setting up, operating, and maintaining your AXE I/O SOLO.

그림 1.1: 정면 각도 view of the IK Multimedia AXE I/O SOLO USB Audio Interface.

2. 상자 안에 무엇이 들어있나요?

Upon unpacking your AXE I/O SOLO, please ensure all the following items are present:

• AXE I/O SOLO Audio Interface
• USB-A-USB-B 케이블
• Registration Card with Software Download Instructions

If any items are missing or damaged, please contact IK Multimedia support immediately.

3. 설정

3.1. 드라이버 설치

1. 제품 등록: Visit the IK Multimedia website and register your AXE I/O SOLO using the provided serial number. This will grant access to software downloads and updates.
2. 드라이버 다운로드: From your IK Multimedia user area, download the latest drivers for your operating system (Windows or macOS).
3. 드라이버 설치: Follow the on-screen instructions to install the drivers. It is recommended to restart your computer after installation.

3.2. 하드웨어 연결

Connect your AXE I/O SOLO to your computer and other audio equipment as follows:

• USB 연결: Connect the supplied USB cable from the AXE I/O SOLO's USB 2.0 port to an available USB port on your computer. The device is USB bus-powered.
• Instrument Input (Input 1): Connect your guitar or bass to the 1/4" TS input on the front panel.
• Microphone/Line Input (Input 2): Connect a microphone (XLR) or a line-level instrument (1/4" TRS) to the combo jack on the rear panel. Ensure 48V phantom power is enabled for condenser microphones.
• Line Outputs (1/L, 2/R): Connect your studio monitors or an external mixer to the 1/4" TRS Line Out jacks on the rear panel.
• Amp 산출: Connect the 1/4" TS Amp Out jack on the front panel to your guitar amplifier's input for re-amping or direct monitoring through an amp.
• 헤드폰: Connect your headphones to the 1/4" TRS Headphone jack on the front panel.
• 미디 인/아웃: Connect MIDI devices to the 5-pin DIN MIDI In and Out ports on the rear panel.
• 외부 통제: Connect expression pedals or footswitches to the 1/4" TS Switch/Pedal 1 and 2 inputs on the rear panel for hands-free control of software parameters.

Figure 3.1: Rear panel showing USB, MIDI, External Control, Line Out, and Mic/Line In connections.

4. 사용 설명서

4.1. 전면 패널 컨트롤

Figure 4.1: Front panel controls including Gain, Z-Tone, Monitor, Headphones, and Master knobs, along with input switches.

• GAIN (Input 1 & 2): Adjusts the input level for connected instruments or microphones. The LED meters indicate signal strength and clipping.
• Z-TONE (Input 1): This unique feature allows you to vary the impedance of the instrument input.
  • 날카로운: Higher impedance for a tighter, sharper sound.
  • 굵은 글씨 : Lower impedance for a thicker, bolder sound.
• PASSIVE/ACTIVE Switch (Input 1): Selects the appropriate input impedance for passive or active guitar pickups.
• PURE/JFET Switch (Input 1): Switches between a transparent PURE preamp and a Class A JFET input for a warmer, tube-like tone.
• 48V Button (Input 2): 콘덴서 마이크에 +48V 팬텀 전원을 공급합니다. 작동 시 LED가 켜집니다.
• 모니터 노브: Blends between the direct input signal (DIRECT) and the playback signal from your computer (DAW) for zero-latency monitoring.
• 헤드폰 조절 노브: Controls the output volume for the headphone jack.
• 마스터 노브: Controls the overall output volume for the Line Outputs.

5. 소프트웨어 통합

The AXE I/O SOLO includes a powerful software bundle to enhance your recording and tone-shaping experience.

5.1. AmpliTube 5 SE

AmpliTube 5 SE provides a comprehensive suite of virtual guitar and bass amplifiers, cabinets, stompboxes, and rack effects. It allows you to create detailed signal chains and achieve a wide range of tones.

Figure 5.1: AXE I/O SOLO in use with a guitar and a laptop running Amp리튜브 5 SE.

그림 5.2: AmpliTube 5 SE software interface, showing various virtual amplifier 및 효과.

5.2. TONEX SE

TONEX SE utilizes AI Machine Modeling technology to capture the sound of any amp, cabinet, or pedal and turn it into a Tone Model. You can play, practice, and record with thousands of Tone Models available.

Figure 5.3: The TONEX SE software interface, displaying various Tone Models and their settings.

5.3. Software Activation

After installing the drivers, follow the instructions provided with your registration card to download and activate AmpliTube 5 SE and TONEX SE from your IK Multimedia user account. Ensure your AXE I/O SOLO is connected during the activation process.

6. 유지관리

• 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 저장: Store the AXE I/O SOLO in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• 케이블 관리: Always handle cables by the connector, not the wire, to prevent damage.

7. 문제 해결

If you encounter issues with your AXE I/O SOLO, consider the following common solutions:

• 소리 없음:
  • Check all cable connections (USB, instrument, monitors, headphones).
  • Ensure the AXE I/O SOLO is selected as the input/output device in your computer's sound settings and your DAW.
  • Adjust GAIN, MONITOR, HEADPHONES, and MASTER knobs.
  • Verify that the correct input mode (PASSIVE/ACTIVE, PURE/JFET) is selected for your instrument.
• 드라이버 문제:
  • Reinstall the latest drivers from the IK Multimedia web대지.
  • 컴퓨터의 다른 USB 포트에 연결해 보십시오.
  • 운영 체제가 최신 상태인지 확인하세요.
• 소프트웨어가 장치를 인식하지 못함:
  • Ensure the AXE I/O SOLO drivers are correctly installed and the device is connected.
  • Check your DAW's audio preferences to ensure the AXE I/O SOLO is selected as the audio device.
  • Verify software activation status.
• 왜곡된 소리:
  • Reduce the input GAIN to prevent clipping (check the CLIP LEDs).
  • Ensure the correct input mode (PASSIVE/ACTIVE) is selected for your instrument.

For further assistance, refer to the official IK Multimedia support resources.

8. 사양

9. 보증 및 지원

9.1. 보증 정보

The IK Multimedia AXE I/O SOLO is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official IK Multimedia web보증 범위 및 기간에 대한 자세한 약관은 해당 사이트를 참조하세요.

9.2. 고객 지원

For technical support, product registration, software downloads, or any other inquiries, please visit the official IK Multimedia support page:

www.ikmultimedia.com/support

PDF 형식의 전체 사용자 설명서는 여기에서 확인하실 수 있습니다. AXE I/O SOLO User Manual (PDF)