1. 서론
This manual provides essential information for the safe and effective operation of your MLAY RF Facial and Body Lifting Machine, Model YJ-RF01. This device utilizes advanced bipolar radiofrequency technology to stimulate collagen and elastin production, aiming to improve skin texture and firmness. Please read this manual thoroughly before first use and retain it for future reference.
2. 안전 정보
- Always use the device with a conductive gel. Do not operate on dry skin.
- Do not keep the device stationary on one area of the skin for more than 2 seconds to prevent overheating.
- 장치를 물과 습기로부터 멀리하십시오.
- Do not use if you have a pacemaker, defibrillator, or any implanted electronic device.
- Consult a physician before use if you have any skin conditions, medical conditions, or are pregnant.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- If the device feels uncomfortably hot, reduce the intensity level or stop use. The device has a built-in safety system that adjusts energy based on skin temperature.
3. 제품 오버view 및 구성 요소
Familiarize yourself with the main components of your MLAY RF device:
그림 3.1: Main unit with facial and body probes, handles, gear display, gear button, time display, time button, and handle cable.
그림 3.2: Illustration of attaching the facial and body probes to the handle.
그림 3.3: Rear panel connections including the host switch, handle cable jack, power cord jack, and cooling air outlet.
4. 설정
- 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
- 프로브 연결: Select either the facial probe or the body probe and securely attach it to the handle. Refer to Figure 3.2 for guidance.
- Connect Handle Cable: Insert the handle cable into the designated jack on the rear of the main unit.
- 전원 연결: Plug the power cord into the power cord jack on the rear of the main unit, then connect the other end to a suitable power outlet.
- 전원 켜기: Flip the host switch on the rear of the unit to the 'ON' position.
5. 사용 설명서
Follow these steps for an effective treatment:
- 피부 정화: Ensure the treatment area (face or body) is clean and dry before application.
- 전도성 젤을 바르세요: Apply a generous layer of conductive gel to the area you intend to treat. The gel is essential for the RF waves to penetrate the skin effectively and for comfortable use. Reapply gel as needed to maintain smooth gliding of the probe.
- 강도 레벨 선택: Use the 'Gear button' on the main unit to select your desired intensity level (1-3). Start with a lower level and gradually increase as your skin tolerates it.
- 치료 시간 설정: Use the 'Time button' to set the desired treatment duration, typically 10-15 minutes per area.
- 치료 시작: Place the probe gently on the skin. Move the device in slow, circular motions, from bottom to top and from inside to outside. Do not hold the device in one spot for more than 2 seconds.
- Monitor Skin Temperature: The device features a safety system that automatically adjusts energy based on skin temperature. If you feel the device becoming too hot, it will automatically reduce the heat level. You can also manually reduce the intensity.
- Complete Treatment: Once the set time has elapsed, the device will stop. Turn off the device using the host switch.
- Cleanse After Use: Wipe off any remaining gel from your skin and the device.
그림 5.1: Operational features including multi-probe design, bipolar technology, intensity levels, and recommended treatment time.
6. 유지관리
- 청소: After each use, wipe the probe and the main unit with a soft, damp 옷감. 연마성 세제를 사용하거나 장치를 물에 담그지 마십시오.
- 저장: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the device is clean and dry before storing.
- 케이블 관리: Avoid bending or twisting the power cord and handle cable excessively to prevent damage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | Power cord not connected; Host switch is off. | Ensure power cord is securely plugged in. Flip the host switch to 'ON'. |
| No heat or very little heat felt. | Insufficient conductive gel; Low intensity setting; Device safety system activated. | Apply more conductive gel. Increase the intensity level. Move the device continuously to allow the safety system to reset. |
| Skin feels too hot. | Intensity level too high; Device held stationary. | Reduce the intensity level. Ensure continuous movement of the probe. |
| No visible results after initial use. | 결과를 얻으려면 시간이 지나도 지속적으로 사용해야 합니다. | Consistent use is key. Visible improvements typically appear after 2-4 weeks for facial areas and 3-5 months for body areas with regular application. |
8. 사양
- 모델 이름: RF
- 모델 번호: YJ-RF01
- 상표: 말레이
- 색상: 하얀색
- 전원: 코드식 전기
- 제품 무게: 2.12 킬로그램
- 패키지 크기: 33.7 x 27.8 x 19.9cm
- 피부 타입: 모두
9. 보증 및 지원
Your MLAY RF Facial and Body Lifting Machine comes with a 1년 보증 구매일로부터. 또한, 60일 환불 보장 is offered. For any product inquiries, technical support, or warranty claims, please contact MLAY customer support through your retailer or the official MLAY web대지.