인텍스 68605

Intex 68605 Manual Foot Pump Instruction Manual

Model: 68605 | Brand: Intex

소개

Thank you for choosing the Intex 68605 Manual Foot Pump. This pump is designed for efficient inflation and deflation of various inflatable items such as air mattresses, inflatable boats, and pool toys. It features a double-speed mechanism for high airflow with both up and down movements, and comes with multiple nozzle sizes to ensure compatibility with most valves.

안전 정보

  • 모든 지침을 주의 깊게 읽으세요 before using the pump.
  • Do not use this pump to inflate high-pressure items such as tires or compressed air tanks. This pump is designed for low-pressure, high-volume inflatables.
  • 어린이의 손이 닿지 않는 곳에 보관하세요. 이것은 장난감이 아닙니다.
  • Do not leave the pump unattended 작동 중.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures to prevent damage to the pump material.
  • Ensure the hose and nozzles are securely attached before operating to prevent air leakage or detachment.

패키지 내용

모든 구성 요소가 있는지 확인하세요.

  • 1 x Intex 68605 Manual Foot Pump
  • 1 x 유연한 호스
  • 3 x Interconnecting Nozzles (various sizes)
Intex 68605 Manual Foot Pump packaging

Image: The Intex 68605 Manual Foot Pump shown in its retail packaging, illustrating the pump, hose, and nozzles.

설정

  1. Unpack the pump: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
  2. 호스를 부착하세요: Connect the flexible hose to the designated port on the pump. Ensure it is firmly secured.
  3. 올바른 노즐을 선택하세요: The pump includes three different nozzle sizes. Choose the nozzle that best fits the valve of the item you intend to inflate or deflate. Attach the selected nozzle to the end of the flexible hose.

작동 지침

인플레이션

  1. Connect to item: Insert the chosen nozzle securely into the inflation valve of your inflatable item.
  2. 펌프 위치: Place the foot pump on a flat, stable surface.
  3. 펌핑 시작: Place your foot on the pump's base and use your hands to press the handle down and pull it up. The double-speed mechanism allows air to be pumped on both the up and down strokes, providing efficient inflation.
  4. 인플레이션을 모니터링하세요: Continue pumping until the item is firm to the touch, but do not overinflate. Refer to the inflatable item's instructions for recommended inflation levels.
  5. 노즐 제거: Once inflated, quickly remove the nozzle and close the item's valve.
Person inflating an inflatable boat with the Intex foot pump

Image: A person using the Intex foot pump to inflate a yellow inflatable boat next to a swimming pool.

Person inflating an air mattress with the Intex foot pump

Image: A person using the Intex foot pump to inflate a blue air mattress on a wooden floor.

수축

The Intex 68605 foot pump can also be used to deflate items, which helps in compact storage.

  1. Connect to deflation port: Connect the flexible hose to the deflation port on the pump (usually marked or indicated in the pump's design).
  2. Connect to item: Insert the appropriate nozzle securely into the deflation valve of your inflatable item.
  3. 펌핑 시작: Operate the pump by pressing the handle down and pulling it up. This action will draw air out of the inflatable item.
  4. Continue until flat: Continue pumping until the item is fully deflated and can be easily folded or stored.
  5. 노즐 제거: Once deflated, remove the nozzle and close the item's valve.

유지

  • 청소: 펌프를 깨끗한 물로 닦아주세요amp 사용 후에는 천으로 닦아주세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
  • 저장: Store the pump in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose is not kinked during storage.
  • 점검: Periodically inspect the hose and nozzles for any signs of wear, cracks, or damage. Replace if necessary.

문제 해결

  • 낮은 기류: Ensure the hose is securely attached to both the pump and the nozzle. Check that the nozzle is correctly inserted into the inflatable item's valve.
  • Pump not moving smoothly: Check for any obstructions in the pump mechanism. Ensure the pump is on a flat surface.
  • Item not inflating/deflating: Verify that you are using the correct port for inflation or deflation. Ensure the valve on the inflatable item is open and the nozzle creates a tight seal.

명세서

특징사양
모델 번호68605 (also known as 68605E #3)
상표인텍스
치수37 cm (14.5 inches) height
재료플라스틱
작동 모드Manual, Double Speed (inflates on up and down strokes)
포함된 노즐3 interconnecting nozzles
기능인플레이션과 디플레이션
품목 무게0.86 킬로그램

보증 및 지원

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Intex website. You can also contact Intex customer service directly for assistance with product inquiries or issues.

Visit the Intex Store: Intex Official Store

© 2024 Intex. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.