GuliKit Route Air Bluetooth Adapter NS07 Instruction Manual

1. 서론

The GuliKit Route Air Bluetooth Adapter (Model NS07) is a compact audio transmitter designed to enable wireless audio on devices that do not natively support Bluetooth headphones. It features aptX Low Latency technology for synchronized audio and supports dual-stream audio, allowing two Bluetooth headphones to connect simultaneously. This manual provides detailed instructions for setup, operation, and troubleshooting.

2. 제품 특징

• 고급 블루투스 칩: Utilizes a CSR/Qualcomm chip for high-quality audio transmission.
• Supported Bluetooth Formats: Compatible with SBC, aptX, and aptX LL (Low Latency).
• 듀얼 스트림 지원: Connects two Bluetooth headsets simultaneously for shared audio experiences.
• Real-time Audio Sync: aptX Low Latency ensures minimal audio delay for gaming and media.
• 플러그 앤 플레이: No drivers required for most compatible devices.
• Battery-free: Powered directly by the connected device, eliminating the need for internal batteries.
• 컴팩트한 디자인: 슬림 프로file designed to integrate seamlessly with portable consoles.
• 폭넓은 호환성: Works with Nintendo Switch, Switch Lite, PS4, PS5, and PC.
• 전송 거리: 최대 10미터(33피트).

3. 패키지 내용

Upon opening the GuliKit Route Air package, you should find the following items:

• GuliKit Route Air Bluetooth Adapter (Main Unit)
• USB-C to USB-A Adapter (for use with PS4, PS5, PC, or Switch Dock)
• Protective Case with Foam Inserts
• 사용 설명서 (본 문서)

Image: GuliKit Route Air Bluetooth Adapter and its USB-C to USB-A adapter.

4. 설정 지침

4.1. Handheld Mode (Nintendo Switch/Switch Lite)

1. Nintendo Switch 또는 Switch Lite의 전원이 켜져 있는지 확인하세요.
2. Carefully insert the GuliKit Route Air adapter into the USB-C port at the bottom of your console. Ensure it is fully seated.
3. Place your Bluetooth headphones or speaker into pairing mode. Refer to your audio device's manual for specific instructions.
4. On the GuliKit Route Air adapter, press and hold either the 'A' or 'B' button for approximately 4 seconds until the corresponding LED light begins to flash rapidly. This indicates pairing mode.
5. Once successfully paired, the LED light on the adapter will turn solid white.
6. If connecting a second pair of headphones, repeat steps 3 and 4 using the other button ('A' or 'B').

Image: GuliKit Route Air Bluetooth Adapter connected to a Nintendo Switch.

4.2. Docked Mode (Nintendo Switch, PS4, PS5, PC)

1. Connect the GuliKit Route Air adapter to the included USB-C to USB-A adapter.
2. Insert the USB-A end of the adapter into an available USB port on your Nintendo Switch Dock, PS4, PS5, or PC.
3. Bluetooth 헤드폰이나 스피커를 페어링 모드로 전환하세요.
4. On the GuliKit Route Air adapter, press and hold either the 'A' or 'B' button for approximately 4 seconds until the corresponding LED light begins to flash rapidly.
5. Once successfully paired, the LED light on the adapter will turn solid white.
6. If connecting a second pair of headphones, repeat steps 3 and 4 using the other button ('A' or 'B').

Image: GuliKit Route Air Bluetooth Adapter connected to a Nintendo Switch Dock.

5. 사용 설명서

5.1. Pairing Status Indication

The GuliKit Route Air features LED indicators to show its current working mode and the codec in use:

• 깜박이는 LED: Indicates the adapter is in pairing mode, searching for a device.
• Solid White LED: 연결이 성공했음을 나타냅니다.
• Middle LED Indicator: Shows the active audio codec (SBC, aptX, LL). The adapter automatically selects the best available codec.

Image: LED indicators on the GuliKit Route Air for pairing and codec status.

5.2. Dual Headset Connection

The adapter supports connecting two Bluetooth headsets simultaneously. Follow the pairing steps for the first headset using button 'A', then repeat the process for the second headset using button 'B'. Both headsets will receive audio from the connected device.

Image: Supported devices and dual headset connection capability.

5.3. Resetting Connections

To clear all paired Bluetooth devices from the GuliKit Route Air adapter, press and hold both the 'A' and 'B' buttons simultaneously for 4 seconds. The adapter will reset its pairing history.

6. 호환성

The GuliKit Route Air Bluetooth Adapter is compatible with a range of gaming consoles and devices:

• 닌텐도 스위치
• 닌텐도 스위치 라이트
• 플레이스테이션 4(PS4)
• 플레이스테이션 5(PS5)
• PC(윈도우)

For optimal performance, ensure your Bluetooth headphones or speakers support aptX Low Latency (aptX LL) to minimize audio delay, especially during gaming.

7. 유지관리

To ensure the longevity and optimal performance of your GuliKit Route Air Bluetooth Adapter, follow these maintenance guidelines:

• 청소: 어댑터를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 연마성 재질은 사용하지 마십시오.
• 저장: When not in use, store the adapter in its provided protective case to prevent dust and physical damage.
• 손질: 어댑터를 떨어뜨리거나 강한 충격을 주지 마십시오.
• 환경: Keep the adapter away from extreme temperatures, humidity, and direct sunlight.

8. 문제 해결

• 오디오/연결 문제 없음:
  • Ensure the adapter is fully inserted into the USB-C port (or USB-A adapter).
  • Verify your Bluetooth headphones/speaker are in pairing mode.
  • Try resetting the adapter's connections by holding both 'A' and 'B' buttons for 4 seconds.
  • Reboot your console/PC and try pairing again.
• 오디오 지연(레이턴시):
  • Ensure your Bluetooth headphones/speaker support aptX Low Latency (aptX LL). The adapter will automatically use this codec if available.
  • Move closer to the adapter to reduce potential interference.
  • If using a non-aptX LL device, some minor delay may be inherent.
• Adapter Not Fitting in Console Case:
  • The GuliKit Route Air is designed to be slim. If using a protective case on your Nintendo Switch, you may need to remove the included SWITCH Spacer from the adapter for a better fit. The case thickness must be within 1.5 mm.
  • Some hard cases, like the Amazon Basics hard case, may not accommodate the adapter when inserted into the Switch due to its form-fitting design.
  

  Image: Adjusting the SWITCH Spacer for compatibility with console cases.

• 마이크 기능 없음:
  • The GuliKit Route Air is primarily an audio transmitter. While some Bluetooth headsets have integrated microphones, their functionality may vary or not be supported by the adapter for voice chat on all platforms.

9. 사양

10. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 공식 GuliKit을 참조하세요. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.