Cable Matters 6-Outlet Surge Protector Power Strip with USB Ports - 12ft, Black User Manual

소개

Thank you for choosing the Cable Matters 6-Outlet Surge Protector Power Strip with USB Ports. This device is designed to provide reliable power distribution and surge protection for your electronic equipment. It features six standard AC outlets and two USB-A charging ports, all protected by a 490 Joule surge suppression rating and a 15 Amp circuit breaker. The 12-foot long extension cord offers flexibility in placement, making it suitable for various home and office environments.

Image: The Cable Matters 6-Outlet Surge Protector Power Strip with USB Ports, featuring a 12-foot cord and a black finish.

안전 정보

This surge protector is ETL Listed, ensuring it meets recognized safety standards. It provides 490 Joules of surge suppression to protect your connected devices from power spikes and surges. A built-in 15 Amp circuit breaker offers protection against overloads. For optimal safety, please observe the following:

• 실내에서만 사용 가능: This product is intended for indoor use in dry locations. Do not expose to moisture or wet conditions.
• 적절한 접지: Always plug the surge protector into a properly grounded 3-prong AC outlet.
• 과부하를 피하세요: Do not exceed the maximum power rating of 15 Amps, 125VAC, 1875W. Overloading can trip the circuit breaker or cause damage.
• 정기적으로 검사하세요: Periodically check the power cord and the unit for any signs of damage. Discontinue use if damaged.

Image: A visual representation highlighting the 490 Joules surge protection and 15 Amp circuit breaker features of the power strip.

설치 지침

1. 풀다: 서지 보호기를 포장에서 조심스럽게 꺼내세요.
2. 놓기: Position the surge protector in a convenient location, ensuring the 12-foot cord can reach a grounded AC wall outlet without being stretched or obstructed.
3. 플러그인: Insert the surge protector's 3-prong plug into a standard 125V AC grounded wall outlet.
4. 전원 켜기: Press the red ON/OFF switch to the 'ON' position. The switch will illuminate, indicating that the unit is receiving power and providing surge protection.
5. 장착(선택 사항): The power strip can be wall-mounted or installed under a desk. Use the included mounting template to mark screw locations. Secure the unit using #6 screws (not included) through the mounting holes on the back of the strip.

Image: The Cable Matters surge protector shown mounted under a desk, illustrating its wall-mountable design and indicating the use of #6 screws for installation.

작동 지침

Once the surge protector is plugged in and powered on, you can connect your devices:

• AC 콘센트: Plug your electronic devices (computers, monitors, printers, etc.) into the six available AC outlets. Ensure that the total power draw does not exceed 1875W.
• USB 충전 포트: Use the two USB-A ports (5V 2.1A total output) to charge smartphones, tablets, and other USB-powered devices. These ports are located at one end of the strip for easy access.
• 전원 스위치: The illuminated ON/OFF switch controls power to all connected AC outlets and USB ports. Press it to turn power on or off.

이미지: 클로즈업 view of the Cable Matters surge protector, demonstrating the use of its USB ports for charging various mobile devices without requiring additional adapters.

유지

To ensure the longevity and optimal performance of your surge protector, follow these maintenance guidelines:

• 청소: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
• 코드 관리: Avoid bending, twisting, or crimping the power cord excessively. Do not place heavy objects on the cord.
• 저장: When not in use, store the surge protector in a cool, dry place away from direct sunlight and extreme temperatures.

이미지: 자세한 view of the Cable Matters surge protector, emphasizing its robust construction, including the sturdy rocker switch, 14AWG heavy-duty copper wire, flame-retardant ABS housing, and flexible PVC cable jacket.

문제 해결

If you encounter issues with your Cable Matters surge protector, refer to the following common solutions:

• 콘센트/USB 포트에 전원이 공급되지 않습니다:
  • Ensure the surge protector's ON/OFF switch is pressed to the 'ON' position and illuminated.
  • 다른 장치를 연결해 벽면 콘센트가 제대로 작동하는지 확인하세요.
  • If the circuit breaker has tripped (the switch might be recessed or popped out), unplug all devices, reset the switch, and then plug devices back in one by one to identify the overloaded item.
• USB 포트가 충전되지 않음:
  • Verify that the USB cable is securely connected to both the device and the surge protector.
  • Ensure your device is compatible with 5V 2.1A USB charging.
  • USB 케이블이나 다른 기기를 사용해 케이블 또는 기기 자체의 고장 여부를 확인해 보세요.
• 서지 보호 표시기(해당되는 경우): If the surge protection indicator light (if present on your model) is off, it may indicate that the surge protection components have been consumed, and the unit should be replaced to ensure continued protection.

명세서

보증 및 지원

For product support, technical assistance, or warranty inquiries, please contact Cable Matters customer service. Refer to the product packaging or the official Cable Matters web연락처 정보와 자세한 보증 조건은 해당 사이트를 참조하세요.