Bluetooth 5.0 FM Transmitter User Manual

제품 끝view

This Bluetooth 5.0 FM Transmitter is designed to enhance your in-car audio experience, providing wireless music streaming, hands-free calling, and fast charging capabilities. It supports multiple audio input methods and integrates with voice assistants for safe driving.

Image: The main unit of the Bluetooth 5.0 FM Transmitter, showing its display, control buttons, flexible neck, and dual USB charging ports.

주요 특징

• Bluetooth 5.0 for stable connection and wide compatibility.
• Hands-free calling with built-in microphone.
• Dual USB charging ports: one QC3.0 fast charge and one 1A standard charge.
• Supports Siri/Google Voice Assistant for voice commands.
• Multiple music play modes: Bluetooth, USB disk, TF card, and AUX input.
• Adjustable FM frequency (87.5-108.0MHz).
• Changeable multi-color LED ambient light.
• 자동 전원 끄기 메모리 기능.

설치 가이드

1. Powering On and FM Frequency Setup

1. FM 송신기를 차량의 12V/24V 시거잭 소켓에 꽂으세요. 기기가 자동으로 켜지고 현재 FM 주파수가 표시됩니다.
2. Tune your car's FM radio to an empty frequency (one with no active broadcast).
3. Press and hold the 'FM' button on the transmitter until the frequency display flashes. Use the previous/next track buttons to adjust the transmitter's frequency to match your car's radio. Once matched, the display will stop flashing.

2. 블루투스 페어링

1. After powering on, the transmitter will enter Bluetooth pairing mode, indicated by a flashing Bluetooth icon on the display.
2. On your mobile device, enable Bluetooth and search for available devices. Select the device named "E0226" (or similar, refer to your device's specific Bluetooth name if different) from the list.
3. Once successfully paired, the Bluetooth icon on the transmitter's display will stop flashing and remain solid. You can now stream audio from your device to your car's stereo.

Image: Illustration of the four different music play modes supported by the transmitter: USB disk, Bluetooth function, AUX input, and TF card.

작동 지침

음악 재생

• 블루투스 모드 : After successful pairing, music from your connected device will automatically play through your car's speakers. Use the previous/next track buttons on the transmitter or your device to control playback.
• USB 디스크 재생: Insert a USB flash drive (up to 32GB) containing MP3, WMA, WAV, FLAC, APE format music files into the USB1 port. The transmitter will automatically detect and play music from the drive.
• TF 카드 재생: Insert a TF (microSD) card (up to 32GB) containing supported music files into the TF card slot. The transmitter will automatically switch to TF card mode and begin playback.
• 보조 입력: Connect your audio device to the transmitter's AUX input port using a 3.5mm audio cable. The transmitter will automatically switch to AUX mode.

핸즈프리 통화

Image: The transmitter facilitating hands-free phone calls and voice navigation prompts through the car's audio system.

• 전화 받기: Press the multi-function button (usually the large central button with a phone icon) once to answer an incoming call.
• 통화 종료: 통화 중 다기능 버튼을 한 번 누르면 통화가 종료됩니다.
• 전화 거부: 수신 전화를 거절하려면 다기능 버튼을 2초 동안 길게 누르십시오.
• 재 다이얼 : Double-press the multi-function button to redial the last dialed number.

음성 비서(Siri/Google Assistant)

Image: Instructions on how to activate Siri or Google Assistant by long-pressing the dial key for 2 seconds.

Long press the multi-function button for 2 seconds to activate your phone's voice assistant (Siri or Google Assistant). You can then use voice commands for navigation, making calls, or other functions.

충전 장치

Image: Close-up of the dual USB ports, highlighting the QC3.0 fast charge port and the 5V/1A port for simultaneous device charging.

The transmitter features two USB charging ports:

• USB1 (5V/1A): Standard charging port, also functions as a USB disk input.
• USB2 (QC3.0): Quick Charge 3.0 port for rapid charging of compatible devices.

You can charge two devices simultaneously using these ports.

Ambient LED Light Control

Image: The transmitter's LED light ring displaying various colors, with instructions to short press the light button to change colors.

Short press the dedicated light button (usually marked with a light bulb icon) to cycle through different LED light colors or modes. This allows you to customize the ambient lighting.

Connecting Two Bluetooth Devices Simultaneously

Image: Diagram illustrating how the Bluetooth 5.0 transmitter can connect to two mobile devices simultaneously, allowing automatic switching between calls and music playback.

The device supports connecting two Bluetooth-enabled phones at the same time. This allows for seamless switching between music playback from one device and answering calls from another, enhancing convenience and safety.

유지

To ensure the longevity and optimal performance of your FM transmitter, follow these simple maintenance guidelines:

• 청소: Use a soft, dry cloth to wipe the surface of the device. Avoid using liquid cleaners or abrasive materials, as they may damage the unit.
• 저장: 장기간 사용하지 않을 경우 송신기를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
• 손질: 기기를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
• 안전: The device features an automatic power-off memory function. Use voice commands for safe driving and avoid operating the device manually while driving.

문제 해결

If you encounter issues with your FM transmitter, refer to the following common problems and solutions:

명세서

보증 및 지원

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the packaging or contact the retailer where the product was purchased.

For technical support or further inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.