1. 서론
The CEM iLDM-150 is a professional-grade laser distance meter designed for fast, accurate, and easy distance measurement. This device utilizes a precision narrow laser beam to ensure accuracy, avoiding common errors associated with extraneous objects. Beyond basic measurements, it offers advanced functionalities such as capturing images of measured distances, marking lengths, areas, or volumes, and storing data on a cloud service for convenient access and sharing.
This manual provides detailed instructions for the safe and effective use of your iLDM-150 Laser Distance Meter. Please read it thoroughly before operating the device.
Figure 1: The CEM iLDM-150 Laser Distance Meter, displaying its compact design, digital interface, and control buttons for precise measurements.
2. 주요 특징
The CEM iLDM-150 Laser Distance Meter includes the following key features:
- 면적 및 부피 계산: Quickly determine areas and volumes from measured lengths.
- Indirect Measuring (Pythagoras): Calculate distances indirectly using the Pythagorean theorem.
- 각도 측정: Integrated tilt sensor allows for angle measurements.
- 지속적인 측정: Track real-time distance changes.
- 이미지 캡처: Take pictures of measured distances.
- 클라우드 서비스 통합: Store and manage measurement data via the Meterbox iLDM software and cloud server.
- 측정 이력: Stores the last 20 measurements for review.
3. 설정
3.1 배터리 설치
The iLDM-150 requires batteries for operation. Batteries are not included with the device.
- Locate the battery compartment cover on the back or side of the device.
- 배터리 덮개를 엽니다.
- Insert the required batteries (typically AAA or AA, refer to the compartment label for exact type and polarity) ensuring correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
3.2 전원 켜기/끄기
- 장치의 전원을 켜려면 [ON/MEAS] 단추.
- 장치의 전원을 끄려면 [OFF] button for a few seconds, or the device will automatically power off after a period of inactivity to conserve battery life.
4. 사용 설명서
4.1 기본 거리 측정
- 장치의 전원을 켭니다.
- 레이저 빔을 표적 표면에 향하게 합니다.
- 를 누르세요 [ON/MEAS] 버튼을 한 번 누르세요. 측정된 거리가 화면에 표시됩니다.
4.2 연속 측정
This mode allows you to track real-time distance changes as you move the device.
- 를 누르세요 [ON/MEAS] button and hold it for a few seconds until 'Continuous' or a similar indicator appears on the display.
- Move the device; the distance displayed will update continuously.
- 누르다 [ON/MEAS] 다시 연속 측정을 중단합니다.
4.3 Area and Volume Calculations
Use the dedicated shortcut keys for these functions.
- 영역: 를 누르세요 [영역] button. Measure the length and width as prompted by the device. The area will be calculated and displayed.
- 용량: 를 누르세요 [용량] button. Measure the length, width, and height as prompted. The volume will be calculated and displayed.
4.4 Indirect Measurement (Pythagoras)
This function is useful for measuring distances that cannot be directly accessed.
- 를 누르세요 [PYTHAGORAS] 단추.
- Follow the on-screen instructions to take the required measurements (e.g., hypotenuse and one leg for a right triangle).
- The device will calculate and display the unknown distance.
4.5 각도 측정
The integrated tilt sensor allows for angle measurements.
- 를 누르세요 [각도] button (if available) or cycle through modes until the angle measurement mode is active.
- 원하는 각도를 측정할 수 있도록 기기를 위치시키세요. 측정된 각도가 화면에 표시됩니다.
4.6 Image Capture and Cloud Service
The iLDM-150 allows you to capture images with measurements and store them.
- After taking a measurement, use the designated button (refer to device interface) to capture an image.
- Install the Meterbox iLDM software on your smartphone.
- Connect your iLDM-150 to your smartphone via Bluetooth (if supported) or transfer data as per software instructions.
- Utilize the Meterbox iLDM software and cloud server to edit, store, and share your measurement data and images.
5. 유지관리
5.1 청소
- 부드러운 천으로 정기적으로 장치를 청소하십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- Ensure the laser lens and display are free from dust and debris for optimal performance. Use a lens cleaning cloth if necessary.
5.2 보관
- Store the iLDM-150 in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
- 장기간 보관할 경우, 누액 및 기기 손상을 방지하기 위해 배터리를 제거하십시오.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | 배터리 잔량이 부족하거나 방전되었거나, 배터리가 잘못 설치되었을 수 있습니다. | 배터리를 새 것으로 교체하세요. 극성이 올바른지 확인하세요. |
| 부정확한 측정. | Obstructed laser path; unstable measuring surface; dirty lens. | Ensure clear line of sight to target; measure on a stable surface; clean the laser lens. |
| 화면에 오류 메시지가 표시됩니다. | 측정 범위를 벗어났습니다. 내부 오류입니다. | Ensure target is within specified range; power off and restart the device. If error persists, contact support. |
| Cannot connect to Meterbox iLDM app. | Bluetooth not enabled; app not installed or updated; device not in pairing mode. | Ensure Bluetooth is on for both devices; install/update Meterbox iLDM app; refer to app instructions for pairing. |
7. 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 한국전자통신연구원 |
| 모델 번호 | iLDM-150 |
| 제조업체 | CEM Instruments India Pvt Ltd |
| ASIN | B07SPL1NW2 |
| 배터리 포함 | 아니요 |
| 색상 | 다색 |
| 방수 레벨 | 방수복 |
8. 보증 및 지원
Please note the following regarding warranty and support for your CEM iLDM-150 Laser Distance Meter:
- All sales are final. No returns are accepted.
- Replacements will be provided only in cases of a wrong item being shipped or a manufacturing defect reported.
- Any reported manufacturing defect must be replicable by the manufacturer upon receiving the product back for assessment.
For technical assistance or to report a manufacturing defect, please contact CEM Instruments India Pvt Ltd directly through their official support channels.