PopGrip with Swappable Top User Manual

1. 서론

The PopGrip is a versatile accessory designed to enhance the functionality of your smartphone or tablet. It provides a secure grip for easier handling, functions as an expandable stand for hands-free viewing, and features a swappable top for personalized style. This manual will guide you through the installation, operation, and care of your PopGrip.

이미지: 앞면 view of the PopGrip featuring a lacrosse helmet, two crossed lacrosse sticks, and the number 13.

2. 패키지 내용

• 1 x PopGrip (with Lacrosse Jersey Number 13 design)

3. 설치

Follow these steps to properly attach your PopGrip to your device or case. Ensure the surface is clean and dry before application.

1. 표면 청소: Wipe the back of your phone or case with a clean cloth to remove any dust, oil, or debris.
2. 팝그립을 제자리에 놓으세요: Peel off the protective film from the adhesive disc on the back of the PopGrip. Carefully position the PopGrip on your desired location on the back of your device or case.
3. 압력을 가하세요: Once positioned, press firmly on the PopGrip for 10-15 seconds to ensure a strong bond. Allow the adhesive to set for a few hours before heavy use.
4. 중요 참고 사항: The advanced adhesive allows for repositioning on most devices and cases. However, it will ~ 아니다 stick to some silicone, waterproof, or highly textured cases. For best results, use with smooth, hard plastic cases. It adheres to iPhone 11, but not to iPhone 11 Pro or iPhone 11 Pro Max without a suitable case.

Image: A sequence of four images demonstrating the attachment and removal of a PopTop. Image 1 shows a PopGrip being placed on a phone. Image 2 shows twisting the PopTop. Image 3 shows removing the PopTop. Image 4 shows attaching a new PopTop.

4. 운영

4.1 Expanding and Collapsing the Grip

• To expand the PopGrip, gently pull the top disc outwards until it clicks into place.
• To collapse the PopGrip, push the top disc inwards until it lies flat against the base.

4.2 스탠드로 사용하기

Once expanded, the PopGrip can be angled to prop up your device for hands-free view비디오 보기, 화상 통화 또는 검색.

Image: A person holding a smartphone with a white PopGrip attached, demonstrating its use for a secure grip.

Image: A person holding a tablet with a white PopGrip attached, illustrating its function as a comfortable grip and potential stand.

4.3 Swapping the PopTop

Your PopGrip features a swappable top, allowing you to change designs easily.

• To remove the PopTop, collapse the PopGrip flat. Then, twist the top 90 degrees in either direction until you feel it release.
• To attach a new PopTop, align the tabs on the new top with the slots on the base, press down, and twist 90 degrees until it locks into place.

5. 관리 및 유지 보수

• 청소: Wipe the PopGrip with a damp cloth to remove dirt or smudges. Avoid harsh chemicals or abrasive cleaners.
• 접착제 관리: If the adhesive loses its stickiness, rinse it with water and let it air dry completely. This can help restore its tackiness. Avoid touching the adhesive unnecessarily.
• 저장: When not in use, keep the PopGrip collapsed to protect the design and prevent accidental damage.

6. 문제 해결

6.1 팝그립이 붙지 않음

• 표면 호환성: Ensure your device or case has a smooth, hard plastic surface. PopGrips may not adhere well to silicone, waterproof, or highly textured materials.
• 청결: Make sure the surface was thoroughly cleaned and dry before application.
• Adhesive Rejuvenation: If the adhesive is dirty, rinse it with water and allow it to air dry completely to restore stickiness.

6.2 PopTop Difficult to Swap

• Ensure the PopGrip is fully collapsed before attempting to twist and remove the PopTop.
• Apply firm, even pressure while twisting 90 degrees.

7. 사양

8. 보증 및 지원

For information regarding warranty coverage and customer support, please refer to the official PopSockets web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 특정 보증 조건은 지역 및 구매 장소에 따라 다를 수 있습니다.

온라인 지원: www.popsockets.com