Sordin Pro-X 전자식 이어머프 사용 설명서

1. 서론

The Sordin Pro-X electronic ear muffs are designed to provide advanced hearing protection while enhancing situational awareness in noisy environments. This manual provides essential instructions for the safe and effective use, maintenance, and care of your Sordin Pro-X ear muffs. Please read this manual thoroughly before using the product.

2. 제품 오버view

The Sordin Pro-X series features active noise attenuation and sound amplification, making it suitable for various applications such as hunting and shooting. Key features include:

• 능동 소음 감쇠: Reduces harmful impulse noises to a safe level.
• 소리 Amp합리화: Amplifies ambient sounds, allowing for improved communication and awareness.
• 4 Selectable Sound Modes: Optimized settings for hunting, focus, shooting, and communication.
• 방수 전자제품: 실외 사용에 적합하도록 내구성을 강화했습니다.
• Comfortable Gel Pads: 장시간 착용을 위해 설계되었습니다.
• EN 352 Certified: Meets European standards for hearing protection.

Figure 2.1: Sordin Pro-X Electronic Ear Muffs. This image displays the overall design of the ear muffs, including the olive green ear cups and the camouflage textile headband.

Figure 2.2: Internal Electronics. This image illustrates the advanced SordinHEAR audio reproduction technology and internal components responsible for active noise amp합리화.

3. 설정

3.1 배터리 설치

1. 이어컵 중 하나에 있는 배터리 칸을 찾으세요.
2. Carefully open the battery compartment cover. This may require a small tool or coin to pry open if it is recessed.
3. AAA 배터리 2개를 넣고, 배터리 칸 내부에 표시된 대로 올바른 극성(+/-)을 맞춰 넣습니다.
4. 배터리 덮개를 딸깍 소리가 날 때까지 단단히 닫으세요.

Figure 3.1: Battery Compartment. This image shows the open battery compartment with two AAA batteries inserted, illustrating the correct orientation.

3.2 Fitting the Ear Muffs

1. 헤어밴드를 최대한 길게 늘리세요.
2. Place the ear cups over your ears, ensuring they fully cover your outer ears.
3. Adjust the headband by sliding the ear cups up or down until a comfortable and secure seal is achieved around your ears. The headband should rest on top of your head.
4. Ensure no hair or clothing interferes with the seal between the ear cups and your head, as this can compromise hearing protection.

4. 사용 설명서

4.1 전원 켜기/끄기

To power on the Sordin Pro-X ear muffs, press and hold the central button on the keypad (refer to Figure 4.1) for approximately 2 seconds until you hear an audible confirmation tone. To power off, press and hold the same central button for approximately 2 seconds until you hear a different confirmation tone.

4.2 볼륨 조절

조정하다 amplification level of ambient sounds using the '+' and '-' buttons located on the keypad (refer to Figure 4.1). Press the '+' button to increase volume and the '-' button to decrease volume. Adjust to a comfortable listening level that allows for clear situational awareness without discomfort.

4.3가지 사운드 모드

The Sordin Pro-X features four selectable sound modes designed for specific environments:

• 사냥 모드: Optimized for detecting subtle sounds in natural environments.
• 집중 모드: Enhances speech clarity and reduces background distractions.
• 촬영 모드: Provides maximum impulse noise protection while maintaining awareness of commands.
• 통신 모드 : Balances ambient sound amplification with clear two-way communication (requires external communication device, not included).

To switch between modes, briefly press the central button on the keypad. Each press will cycle through the available modes, indicated by an audible cue.

4.4 외부 오디오 입력

The ear muffs are equipped with a 3.5mm audio input jack (visible in Figure 4.1) for connecting external audio devices, such as communication radios or media players. Connect a standard 3.5mm audio cable (not included) from your device to the input jack on the ear muff. The audio will be heard through the ear muffs.

Figure 4.1: Keypad and Audio Jack. This image highlights the control buttons (+, -, central button) and the 3.5mm audio input jack on the side of the ear cup.

5. 유지관리

5.1 청소

Clean the exterior of the ear muffs with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the electronic components.

5.2 보관

Store the Sordin Pro-X ear muffs in a dry place, away from direct sunlight and extreme temperatures. When storing for extended periods, remove the batteries to prevent leakage and damage.

5.3 배터리 교체

Replace batteries when the low battery indicator is activated or when sound quality degrades. Follow the battery installation steps outlined in Section 3.1.

6. 문제 해결

• 전원 없음: 배터리가 올바르게 장착되었고 방전되지 않았는지 확인하세요. 필요한 경우 새 AAA 배터리로 교체하세요.
• Poor Sound Quality/No Amp합리화: Check battery level. Ensure ear cups form a proper seal around your ears.
• 간헐적인 소리: Verify battery connections. Ensure no external interference.
• 불편감: Adjust the headband for a better fit. Ensure gel pads are properly seated.

7. 사양

Figure 7.1: Certification Label. This image shows the side of an ear cup with the EN 352 certification mark, indicating compliance with European safety standards.

8. 안전 정보

• Always ensure the ear muffs are properly fitted to achieve the stated noise reduction.
• Do not modify the ear muffs, as this may compromise their protective capabilities.
• Regularly inspect ear cups and gel pads for wear and tear. Replace damaged components immediately.
• The effectiveness of hearing protection can be reduced by hair, eyeglasses, or other items that interfere with the seal.
• Prolonged exposure to loud noises, even with hearing protection, can still cause hearing damage.

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact Sordin customer service directly. Refer to the official Sordin web연락처 정보는 해당 사이트나 제품 포장을 참조하세요.