AUTOOL X60 Multi-Function OBD-II Digital Meter User Manual

1. 서론

The AUTOOL X60 OBD computer is a smart and powerful automotive meter designed to provide essential vehicle data. It is particularly useful for vehicles that lack a built-in speedometer, engine temperature gauge, oil thermometer, boost gauge, or fuel consumption meter. The X60 monitors and displays critical information such as battery voltage, 엔진 충전 voltage, and provides warnings for over-speed and engine temperature. It also features real-time data stream reading, trouble code scanning, and clearing capabilities.

2. 주요 특징

• 지원 차량: Compatible with petrol vehicles using standard OBD-II protocol, especially those manufactured after 1996 (US), 2002 (EU petrol), 2004 (EU diesel), and 2009 (Asia).
• 간편한 설치: Simple plug-and-play setup via the OBD port, requiring no wire modification. Includes a mount and dual-sided tape for secure placement.
• 고급 하드웨어: Powered by a 32-bit ARM CORTEX-M3 kernel CPU with a maximum operating frequency of 72MHz, supporting multiple high-speed auto communication protocols.
• 경고 기능: Features water temperature warning, over-speed alarm, shifting reminders, and vehicle malfunction warnings to enhance driving safety.
• 다기능 디스플레이: Displays various parameters including driving speed, engine RPM, battery voltage, coolant temperature, oil temperature, oil pressure, driving distance, fuel consumption, clock, engine load, and intake pressure.
• 진단 기능: Reads real-time data streams, scans, and clears trouble codes.

3. 패키지 내용

The AUTOOL X60 package includes the following items:

• 1 x AUTOOL X60 Digital Meter
• 1 x OBD 케이블
• 1 x Dual-Sided Tape
• 1 x 사용자 설명서
• 1 x 인증서

Video: Unboxing the AUTOOL X60 and reviewing its package contents.

4. 설정 및 설치

Follow these steps to properly install your AUTOOL X60 Digital Meter:

1. OBD-II 포트를 찾으십시오: 차량의 OBD-II 진단 포트를 찾으십시오. 일반적으로 운전석 쪽 대시보드 아래에 있습니다.
2. OBD 케이블 연결: Plug the provided OBD cable into the vehicle's OBD-II port.
3. 케이블 경로: Carefully route the OBD cable to the desired mounting location for the X60 unit, ensuring it does not interfere with driving controls or safety features. You may tuck the cable into seams for a cleaner look.
4. Connect to X60: Plug the other end of the OBD cable (USB port) into the AUTOOL X60 unit.
5. Mount X60: Use the provided mount and dual-sided tape to securely fix the X60 unit on your dashboard or preferred location. Ensure the display is clearly visible and does not obstruct your view 도로의.

Image: Step-by-step visual guide for connecting the OBD adapter and mounting the AUTOOL X60 unit.

Image: Various angles of the AUTOOL X60 and its mounting base, showing how it attaches to the dashboard.

5. 사용 설명서

5.1. 전원 켜기/끄기

The AUTOOL X60 automatically powers on when the vehicle is started and powers off when the vehicle is turned off, as it draws power directly from the OBD-II port.

5.2. 메뉴 탐색

The unit features a single multi-directional button (often a scroll wheel or rocker switch) on the top or side for navigation. Pressing the button typically confirms a selection, while tilting it left/right or rotating it allows you to scroll through options or change display modes.

5.3. Display Modes and Parameters

The X60 offers multiple display interfaces and a wide range of parameters. You can cycle through different display layouts and select which parameters are shown on the screen.

이미지: 전amples of different interface displays available on the AUTOOL X60, showing various data points like speed, RPM, and temperatures.

Image: Icons representing the various displayable functions (e.g., Driving Speed, Engine RPM, Battery Voltage) and alarm functions (e.g., Speed Alarm, Coolant Temp. Alarm).

Common Displayable Parameters:

• 엔진 냉각수 온도(ECT)
• Average Fuel Consumption (AVG)
• Revolutions-per-Minute (RPM)
• Turbo Pressure (PSI)
• 권tage (VLT)
• Inlet Pressure (MAP)
• Air-Fuel Ratio (A/F)
• Driving Time (MIN)
• Driving Distance (DIS)
• Engine Load (ELD)
• System Time (TIM)
• 총 주행 거리(ODO)
• Oil Temperature (OIT)
• Altitude (ASL)
• 스로틀 위치 센서(TPS)
• Transmission Temperature (CVT)
• Driving Direction (DIR)

5.4. 알람 기능

The X60 provides audible and visual alerts for various conditions:

• Water Temperature Warning: Alerts if engine coolant temperature exceeds a set limit.
• 과속 경보: Notifies the driver if the vehicle speed surpasses a pre-set threshold.
• Shifting Reminding: Provides prompts for optimal gear shifting.
• Vehicle Malfunction Warning: Alerts to detected engine or system malfunctions.
• 피로 운전 경보: Reminds the driver to take a break after extended driving periods.
• RPM 알람: Alerts if engine RPM exceeds a set limit.
• 권tage 알람: Warns if battery voltage falls outside optimal range.

5.5. 시스템 설정

Access the system settings menu to customize various aspects of the X60, including:

• 언어 세트: 표시 언어를 변경합니다.
• 사운드 스위치 : 소리 알림을 활성화 또는 비활성화합니다.
• 명도: Adjust screen brightness (manual or automatic).
• 단위: Switch between Metric (km/h, Celsius) and Imperial (mph, Fahrenheit) units.
• 알람 임계값: Configure specific values for speed, RPM, voltage, and temperature alarms.
• 시간 조정: Set or adjust the clock.

Image: Illustrates the automatic light sensor feature, which adjusts screen brightness for optimal visibility during both daytime and nighttime driving.

6. 유지관리

To ensure the longevity and optimal performance of your AUTOOL X60 Digital Meter, follow these maintenance guidelines:

• 청소: Use a soft, dry cloth to clean the display screen and the unit's exterior. Avoid abrasive cleaners or solvents that could damage the device.
• 케이블 검사: Periodically check the OBD cable for any signs of wear, fraying, or damage. Replace if necessary to maintain a secure connection.
• 환경 조건: 본 제품을 극한의 온도, 장시간 직사광선 또는 과도한 습기에 노출시키지 마십시오.
• 펌웨어 업데이트: AUTOOL 공식 웹사이트를 확인하세요. web장치에 최신 기능과 버그 수정 사항이 있는지 확인하려면 사용 가능한 펌웨어 업데이트가 있는지 사이트를 방문하세요.

7. 문제 해결

If you encounter issues with your AUTOOL X60, refer to the following common troubleshooting steps:

• "Failed to Connect" Message:
  • Ensure the OBD cable is securely plugged into both the vehicle's OBD-II port and the X60 unit.
  • Verify your vehicle is compatible with the X60 (12V OBD-II standard, manufactured after specified dates).
  • Turn off the vehicle, unplug the X60, wait a few seconds, and then plug it back in and restart the vehicle.
  • Check for any loose connections or damage to the OBD cable.
• 부정확한 판독:
  • Ensure the correct units (Metric/Imperial) are selected in the system settings.
  • Some parameters may require calibration or adjustment in the system settings (e.g., speed adjustment).
  • If specific sensors are not reading, try unplugging and replugging the unit.
• 디스플레이가 켜지지 않음:
  • 차량의 점화가 켜져 있는지 확인하세요.
  • Check the OBD cable connection.
  • 차량 배터리에 충분한 충전량이 있는지 확인하십시오.
• Annoying Beeping Sounds:
  • Access the system settings to adjust or disable specific alarm sounds (e.g., over-speed, RPM alarm).

8. 사양

이미지: 상세 view of the AUTOOL X60 showing its dimensions (70mm height, 60mm width) and key components like the LED display, function button, USB port, and OBD adapter.

Image: Diagram illustrating the pinout of a standard OBD-II connector, indicating which pins are used for various signals like SAE J1850 Bus+, Chassis, Signal Ground, CAN High/Low, and Vehicle Battery Positive.

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official AUTOOL web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.