Einhell GE-HH 18/45 Li T

Einhell Power X-Change 18V Cordless Long Reach Hedge Trimmer GE-HH 18/45 Li T Solo User Manual

Model: GE-HH 18/45 Li T | Brand: Einhell

1. 제품 오버view

The Einhell Power X-Change GE-HH 18/45 Li T is a powerful 18V cordless long reach hedge trimmer designed for maintaining hedges, shrubs, and bushes, especially at height. This tool offers cordless freedom and is part of the Einhell Power X-Change battery system (battery and charger sold separately).

주요 특징은 다음과 같습니다.

  • 무선의 자유: Operates on an 18V Power X-Change battery for unrestricted movement.
  • 텔레스코픽 핸들: Infinitely adjustable aluminum handle extends up to 2.5 meters (8 feet 2 inches) for reaching high areas.
  • 정밀 블레이드: Laser-cut and diamond-ground steel blades provide clean, sharp cuts with a cutting length of 400mm (16 inches) and 16mm teeth spacing.
  • 조절 가능한 커팅 헤드: A 7-position tiltable cutting head allows for versatile trimming angles.
  • 균형 잡힌 디자인: Handle-mounted motor ensures optimal balance, reducing fatigue during extended use.
  • 내구성 있는 구조: Features a robust metal gearbox for long-lasting performance.

2. 안전 지침

전동공구를 사용할 때는 항상 안전을 최우선으로 고려해야 합니다. 사용 전에 모든 안전 경고 및 사용 설명서를 읽고 숙지하십시오. 이러한 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상을 입을 수 있습니다.

  • 개인 보호 장비(PPE): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy gloves, and non-slip footwear. A safety helmet with a face shield is recommended, especially when working overhead.
  • 작업 영역: Keep the work area clean and well-lit. Do not operate the trimmer in wet or damp conditions. Keep bystanders, children, and pets at a safe distance (at least 15 meters / 50 feet).
  • 도구 검사: Before each use, inspect the trimmer for any damage, loose parts, or worn blades. Do not use a damaged tool.
  • 배터리 안전: Use only Einhell Power X-Change 18V batteries and chargers. Do not expose batteries to heat, direct sunlight, or water.
  • 적절한 그립: Always hold the trimmer firmly with both hands.
  • 장애물을 피하세요: Be aware of hidden wires, fences, or other objects that could be struck by the blades.
  • 유지: Disconnect the battery before performing any maintenance, cleaning, or when clearing jammed material.
  • 저장: 트리머는 어린이의 손이 닿지 않는 건조하고 안전한 곳에 보관하십시오.

3. 포함된 구성 요소

The following components are typically included with your Einhell GE-HH 18/45 Li T hedge trimmer:

  • 헤지 트리머 헤드
  • 확장 가능한 폴
  • 블레이드 가드
  • 사용 설명서

Note: Battery and charger are not included and must be purchased separately as part of the Power X-Change system.

4. 설정

Follow these steps to prepare your hedge trimmer for use:

  1. 기둥 조립: Connect the hedge trimmer head to the extendable pole. Ensure all connections are secure and locked into place according to the diagrams in the full manual.
  2. 막대 길이 조절하기: Loosen the locking mechanism on the telescopic aluminum handle. Extend the pole to the desired length for your task, then securely tighten the locking mechanism. The pole can be adjusted from 1.6m to 2.5m.
  3. 배터리 삽입: Ensure the battery is fully charged. Align the battery with the battery slot on the trimmer's handle and slide it in until it clicks securely into place.
  4. 어깨 끈 부착: For comfortable and balanced operation, especially when extended, attach the provided shoulder strap to the designated points on the trimmer. Adjust the strap for a snug fit.
  5. 칼날 보호대를 제거하세요: Carefully remove the blade guard from the cutting blades before starting the trimmer. Always replace the blade guard when the tool is not in use or during transport.
Person using Einhell long reach hedge trimmer to trim a tall hedge
Image 1: A user demonstrating the Einhell GE-HH 18/45 Li T long reach hedge trimmer in action, trimming the top of a tall hedge. The user is wearing appropriate safety gear including a helmet with a face shield and ear protection.

5. 사용 설명서

Before operating, ensure you have read the safety instructions and the trimmer is properly set up.

  1. 트리머 시작: With the battery inserted, press the safety lock-off button (if present) and then squeeze the trigger switch to start the motor. Release the trigger to stop.
  2. Adjusting Cutting Head Angle: The cutting head can be tilted to 7 different positions. To adjust, press the release button/lever on the head, set it to the desired angle, and ensure it locks securely in place. This allows for ergonomic cutting of hedge tops and sides.
  3. 트리밍 기술:
    • For vertical surfaces, use a sweeping motion from bottom to top.
    • For horizontal surfaces, hold the trimmer slightly angled (about 10-15 degrees) to ensure a clean cut and allow clippings to fall away.
    • Avoid forcing the blades through thick branches. If the blades jam, immediately release the trigger and remove the battery before clearing the obstruction.
  4. 고소 작업: When using the extended pole, maintain a stable stance. Use the shoulder strap to distribute weight and reduce strain. Be mindful of overhead power lines and other obstacles.
  5. 트리머 중지: Release the trigger switch. The blades will stop quickly. Always remove the battery when finished or before making adjustments.

6. 유지관리

정기적인 유지관리를 통해 최적의 성능을 보장하고 울타리 트리머의 수명을 연장할 수 있습니다.

  • 블레이드 청소: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap and debris.
  • 블레이드 윤활: Apply a light machine oil or blade lubricant to the cutting blades after cleaning to prevent rust and ensure smooth operation.
  • 블레이드 샤프닝: Dull blades can tear foliage and strain the motor. Have the blades professionally sharpened or replace them if they become excessively dull or damaged.
  • 일반 청소: Wipe down the housing of the trimmer with a damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
  • 저장: Store the trimmer in a dry, secure location, away from moisture and extreme temperatures. Always reattach the blade guard before storage. Remove the battery if storing for extended periods.

7. 문제 해결

이 섹션에서는 울타리 트리머를 사용할 때 발생할 수 있는 일반적인 문제에 대해 설명합니다.

문제가능한 원인해결책
트리머가 시작되지 않습니다.
  • 배터리가 올바르게 삽입되지 않았습니다.
  • 배터리가 방전되었습니다.
  • 안전 잠금 장치가 작동하지 않습니다.
  • 도구 오작동.
  • 배터리가 완전히 장착되고 제자리에 고정되었는지 확인하세요.
  • 배터리를 충전하세요.
  • 방아쇠를 당기기 전에 안전 잠금 버튼을 누르세요.
  • 고객 지원팀에 문의하세요.
절단 성능이 좋지 않습니다.
  • 칼날이 둔해지거나 손상되었습니다.
  • Blades are dirty or sticky with sap.
  • Cutting too quickly.
  • 블레이드를 갈거나 교체하십시오.
  • Clean and lubricate blades.
  • Reduce cutting speed and allow blades to work.
트리머가 작동 중에 멈춥니다.
  • 배터리가 과열되었거나 방전되었습니다.
  • 칼날이 걸렸습니다.
  • 모터 과부하.
  • Allow battery to cool or replace with a charged one.
  • Remove battery, then carefully clear obstruction from blades.
  • Reduce load on the motor; cut smaller sections.

8. 사양

Technical data for the Einhell GE-HH 18/45 Li T hedge trimmer:

  • 모델 번호: 3410866
  • 전원: 18V Battery Powered (Power X-Change system)
  • 블레이드 길이: 450의 mm (17.7 인치)
  • 절단 길이: 400의 mm (16 인치)
  • Teeth Spacing: 16mm (XNUMXmm)
  • 제품 크기(길이 x 너비 x 높이): 82.28" x 5.12" x 6.69"(209cm x 13cm x 17cm)
  • 품목 무게: 4.28킬로그램(9.44파운드)
  • 블레이드 소재: 합금강
  • 손잡이 소재: 알류미늄
  • 제조업체: 아인헬

9. 보증 및 지원

For warranty information, technical support, or to order spare parts, please refer to the official Einhell web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

EU 예비 부품 공급 기간: 2년

추가 지원이 필요하면 다음을 방문하세요. Einhell official web대지.

© 2026 Einhell. 모든 권리 보유. 정보는 예고 없이 변경될 수 있습니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.