1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Lithonia Lighting 4-foot LED vapor tight fixture. This fixture is designed for demanding environments, offering high performance and durability.
The fixture delivers 5000 lumens of light at a 4000K color temperature, is DLC compliant, and features a robust design with high ingress protection ratings (IP65 and IP66) against dust and water jets. LEDs are rated for over 50,000 hours of usage.
2. 안전 정보
경고: Risk of electric shock. Disconnect power before installation or servicing. All wiring connections must be made by a qualified electrician in accordance with national and local electrical codes.
- 공급 볼륨을 확인tage is correct for the fixture (MVOLT).
- Do not install near heat sources or in areas with flammable materials.
- 설치 및 유지관리 시에는 적절한 개인 보호 장비(PPE)를 착용하세요.
- 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
- Fixture may be hot during operation. Allow to cool before servicing.
3. 패키지 내용
설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
- LED Vapor Tight Fixture (1 unit)
- Surface Mounting Brackets (pre-installed or included)
- Installation Hardware (screws, anchors, etc. - may vary)
- 사용 설명서
4. 설정 및 설치
The Lithonia Lighting XVML L48 fixture is designed for easy installation, including surface mounting and options for wire connection or daisy-chaining up to 15 units.
4.1 고정물 장착
The fixture includes surface mounting brackets for secure attachment to ceilings or walls. Ensure the mounting surface can support the weight of the fixture (approximately 6.1 pounds).
Figure 1: Lithonia Lighting XVML L48 LED Vapor Tight Fixture with Mounting Chains. This image shows the full fixture suspended by chains, illustrating its typical installation method.
4.2 전기 연결
Ensure power is disconnected at the circuit breaker before making any electrical connections. The fixture supports MVOLT (multi-voltage) input, allowing for flexible wiring. Follow local electrical codes for proper grounding and wiring practices.
Figure 2: Close-up of Lithonia Lighting XVML L48 LED Vapor Tight Fixture End with Wiring Access. This image highlights the end cap of the fixture, showing where electrical connections are typically made.
The fixture is designed for wire connect or daisy chain installation, allowing up to 15 units to be connected in series, depending on circuit capacity.
4.3 설치 후 확인
After installation, restore power and verify proper operation of the fixture. Ensure all seals and covers are securely fastened to maintain the vapor-tight integrity.
5. 사용 설명서
The Lithonia Lighting XVML L48 fixture operates upon receiving power. It may include a motion sensor for automated operation, depending on the specific configuration. Some models may also support control via an app.
- 표준 작업: Once wired and powered, the fixture will illuminate.
- 모션 센서: If equipped, the fixture will activate when motion is detected within its range and deactivate after a set period of inactivity.
- 앱 제어: Refer to the specific app instructions for models supporting this feature to adjust settings such as brightness or scheduling.
Figure 3: Lithonia Lighting XVML L48 LED Vapor Tight Fixtures Installed in a Parking Garage. This image demonstrates the fixture's application in a large, industrial setting, providing amp일루미네이션.
6. 유지관리
Regular maintenance ensures optimal performance and longevity of your LED vapor tight fixture.
6.1 청소
The fixture's IP65 and IP66 ratings mean it is protected against dust and low/high pressure water jets. It can withstand up to 1500 psi hose down, making it suitable for environments requiring frequent cleaning.
- 청소하기 전에 전원을 분리하세요.
- Use a soft cloth and mild, non-abrasive cleaning solution.
- For heavy-duty cleaning, the fixture can be hosed down, but ensure all electrical connections are properly sealed and protected.
6.2 검사
Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure mounting hardware remains secure.
Figure 4: Lithonia Lighting XVML L48 LED Vapor Tight Fixtures Installed at an Outdoor Bus Stop. This image illustrates the fixture's suitability for outdoor, exposed environments.
7. 문제 해결
조명이 예상대로 작동하지 않는 경우 다음의 일반적인 문제와 해결 방법을 참조하세요.
- 빛 없음:
- Check if power is supplied to the fixture.
- 모든 전기 연결이 안전하고 올바른지 확인하세요.
- 회로 차단기가 트립되지 않았는지 확인하십시오.
- 희미한 빛 또는 깜박임:
- Confirm the supply voltage는 경기의 요구 사항과 일치합니다.
- 느슨한 전선 연결을 확인하세요.
- Ensure the fixture is not operating in extreme temperatures outside its specified range.
- 모션 센서가 응답하지 않음:
- 센서 렌즈가 깨끗하고 막힘이 없는지 확인하십시오.
- Verify sensor settings if adjustable (e.g., via app).
If issues persist, contact a qualified electrician or Lithonia Lighting customer support.
8. 사양
| 상표 | Lithonia 조명 |
| 모델 번호 | XVML L48 5000LM MVOLT 40K 80CRI |
| 라이트 타입 | 주도의 |
| 명도 | 5000루멘 |
| 색온도 | 4000 켈빈 |
| 연색지수(CRI) | 80 |
| 왓tage | 33.00 Watts (Light Source Wattage: 48와트) |
| 권tage | MVOLT(다중 볼륨)tage, e.g., 277 Volts listed) |
| 수명 | 50,000시간 |
| 침투 방지(IP) 등급 | IP65 and IP66 (from description/feature bullets) |
| 서지 보호 | 2Kv (from feature bullets) |
| 실내/실외 사용 | 집 밖의 |
| 재료 유형 | 철 |
| 품목 무게 | 6.1 파운드 |
| 사양 충족 | DLC 표준 |
| 센서 기술 | Motion Sensor (if equipped) |
| 제어 방법 | App (if equipped) |
9. 보증 정보
The Lithonia Lighting XVML L48 LED Vapor Tight Fixture comes with a 5년 보증. This warranty covers defects in materials and workmanship under normal use and service. The LEDs are rated to last for over 50,000 hours of usage, ensuring long-term performance.
For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Lithonia Lighting web대지.
10. 지원 정보
For technical assistance, troubleshooting, or warranty claims, please contact Lithonia Lighting customer support. Have your model number and purchase date available when contacting support.
일반적으로 제조업체의 공식 연락처 정보를 찾을 수 있습니다. web사이트 또는 제품 포장에 표시되어 있습니다.