오토올 BT360

AUTOOL BT360 12V 배터리 부하 테스터 사용 설명서

모델: BT360

1. 서론

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. 안전 정보

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

  • 배터리 근처에서 작업할 때는 적절한 보안경과 보호복을 착용하십시오.
  • 차량이 통풍이 잘 되는 곳에 있는지 확인하세요.
  • Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
  • 뜨거운 엔진 부품이나 움직이는 부품을 만지지 마십시오.
  • Keep the tester and cables away from water, oil, and grease.
  • 배터리 cl을 확인하십시오.amp전선은 올바른 단자에 단단히 연결되어 있습니다(빨간색은 양극, 검은색은 음극).
  • 배터리 산이 피부나 눈에 닿았을 경우 즉시 물로 충분히 씻어내고 의사의 진료를 받으세요.

3. 제품 오버view

3.1개의 구성요소

The AUTOOL BT360 package typically includes:

  • AUTOOL BT360 Main Unit
  • Integrated Testing Cables with Alligator Clamps (빨간색은 양수, 검은색은 음수)
  • 사용 설명서 (본 문서)
AUTOOL BT360 Battery Tester box contents

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

AUTOOL BT360 Battery Tester front view

이미지 3.2: 앞면 view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

  • 키보드: Escape/Back button.
  • 이비인후과: Enter/Confirm button.
  • 위/아래 화살표: 메뉴 선택을 위한 탐색 버튼.

3.3 주요 특징

  • Performs Battery Test, Cranking Test, and Charging Test.
  • Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
  • Wide CCA testing range: 100-2400 CCA.
  • Multi-language support for user interface.
AUTOOL BT360 Multi-language support

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. 사양

AUTOOL BT360 Battery Tester dimensions

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

매개변수
모델BT360
시스템 볼륨tage12 볼트
입력 Voltag및 범위9V ~ 15V
CCA 범위100-2400CCA
작동 온도-20°C ~ 50°C
지원되는 배터리 유형Regular Flooded, AGM Flat Plate, AGM Spiral, Gel
치수(길이 x 너비 x 높이)18.8 x 16.76 x 5.84cm
무게320g
한국어:602860607704

4.1 Supported Starting Power Supply Standards

AUTOOL BT360 Supported CCA standards table

Image 4.2: Table showing various starting power supply standards supported by the BT360.

기준범위
한국어:100-2400
일본26A17-245H52
소음100-2200
국제전기전자기술자협회(IEC)100-2200
EN100-1400
미국 자동차 공업 협회(SAE)100-2400
GB30-220 아
BCI100-2400
엠씨에이100-2400
CA100-2400

5. 설정

5.1 풀기

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 테스터 연결하기

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

  1. 차량의 시동이 꺼져 있고 모든 액세서리가 꺼져 있는지 확인하십시오.
  2. 연결하다 빨간색 양(+) clamp 12V 배터리의 양극(+) 단자에 연결하십시오.
  3. 연결하다 검은색 음(-) clamp 12V 배터리의 음극(-) 단자에 연결하십시오.
  4. 연결되면 테스터는 자동으로 전원이 켜집니다.
AUTOOL BT360 Battery Tester with cables

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

AUTOOL BT360 Battery Tester connected to a car battery

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. 사용 설명서

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

AUTOOL BT360 display screens showing test options and results

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 배터리 테스트

This function evaluates the overall health of the battery.

  1. 메인 메뉴에서 선택하세요 배터리 테스트 and press ENT.
  2. 선택하다 배터리 위치: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
  3. 선택하다 배터리 유형: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
  4. 선택하다 시험 표준: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
  5. 세트 배터리 등급: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
  6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 크랭킹 테스트

이 테스트는 스타터 모터를 포함한 차량의 시동 시스템을 분석합니다.

  1. 메인 메뉴에서 선택하세요 크랭킹 테스트 and press ENT.
  2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage 크랭킹 중.
  3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 충전 테스트

이 테스트는 발전기와 조절기를 포함한 차량의 충전 시스템을 평가합니다.

  1. 메인 메뉴에서 선택하세요 충전 테스트 and press ENT.
  2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
  3. 테스터는 충전 전압을 측정합니다.tage under load and no-load conditions.
  4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. 유지관리

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

  • Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 배터리를 깨끗하게 유지하세요amp깨끗하고 부식이 없습니다.
  • 테스터는 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
  • 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.

8. 문제 해결

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

문제가능한 원인해결책
테스터의 전원이 켜지지 않습니다.Loose connection; Battery voltage too low; Faulty cables.CL을 확인amp안전하게 연결되었습니다. 배터리 용량을 확인하세요.tage (must be above 9V). Inspect cables for damage.
부정확한 판독값.Incorrect battery type/standard/rating selected; Corroded battery terminals.Verify selected parameters match the battery. Clean battery terminals.
오류 메시지가 표시됩니다.특정 오류 조건.Refer to the specific error code (if any) or re-run the test ensuring all steps are followed correctly.
화면이 검게 나오거나 멈췄습니다.소프트웨어 오류; 정전.Disconnect and reconnect the tester to reset. If problem persists, contact support.

9. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: 오토올

첫 이용 가능 날짜: 27년 2017월 XNUMX일

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.