AMD Wraith Max Cooler with RGB LED Fan (Model 199-999575) User Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your AMD Wraith Max Cooler with RGB LED Fan. This high-performance CPU cooler is designed to efficiently dissipate heat from your processor, ensuring stable and optimal system performance. Please read this manual thoroughly before installation and use.

Image 1.1: The AMD Wraith Max Cooler, featuring a black fan with an illuminated red RGB LED ring and a heatsink base with copper heat pipes.

2. 안전 정보

• 구성 요소를 설치하거나 제거하기 전에 항상 컴퓨터의 전원을 분리하세요.
• Handle the cooler and CPU with care to avoid damage to pins or components.
• 정전기 방전(ESD)을 방지하기 위해 적절한 접지를 확보하십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• Do not operate the cooler if the fan blades are obstructed or damaged.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• AMD Wraith Max CPU Cooler with pre-applied thermal paste (or a small tube of thermal compound).
• RGB LED connection cable (may vary by version, e.g., 4-pin or 5-pin).
• Mounting brackets (if not pre-attached or integrated with the cooler). Note: Some versions may require existing motherboard mounting hardware.

4. 사양

5. 설정 및 설치

Follow these steps carefully to install your AMD Wraith Max Cooler. It is recommended to install the cooler with the motherboard removed from the PC case for easier access, especially if you are not experienced with CPU cooler installations.

1. 마더보드 준비: Ensure your motherboard has the standard AMD AM4 retention bracket installed. If not, install the appropriate backplate and retention clips according to your motherboard's manual.
2. CPU 표면 청소: If replacing an old cooler, carefully clean any old thermal paste from the CPU's integrated heat spreader (IHS) using isopropyl alcohol and a lint-free cloth.
3. 열 페이스트 적용: The Wraith Max Cooler often comes with pre-applied thermal paste. If not, apply a small pea-sized amount of thermal paste to the center of the CPU's IHS. Do not spread it manually; the pressure from the cooler will spread it evenly.
4. 쿨러 위치: Carefully align the cooler over the CPU, ensuring the mounting clips on the cooler align with the retention bracket tabs on the motherboard.
5. 쿨러 고정:
   • Hook the non-lever side of the cooler's mounting clip onto the corresponding tab of the motherboard retention bracket.
   • While applying gentle, even pressure, push down the lever on the opposite side of the cooler until it locks onto the second tab of the retention bracket. This step may require firm pressure.
6. 팬 전원 연결: Connect the 4-pin fan cable from the cooler to the "CPU_FAN" header on your motherboard.
7. RGB 케이블을 연결하세요: Connect the RGB LED cable from the cooler to the appropriate RGB header on your motherboard (e.g., 4-pin 12V RGB header). Refer to your motherboard manual for the correct header location and type.

이미지 5.1: 더 가까이 view of the AMD Wraith Max Cooler's heatsink and heat pipes, crucial for efficient heat transfer.

6. 사용 설명서

Once installed, the AMD Wraith Max Cooler operates automatically, adjusting fan speed based on CPU temperature. The RGB LED lighting can be controlled via your motherboard's RGB software.

• 팬 작동 : The fan speed is controlled by the motherboard's BIOS/UEFI settings or operating system software, typically based on CPU temperature. Ensure the fan is spinning freely after system startup.
• RGB 조명 제어:
  • Install the RGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
  • Use the software to customize the color, effects, and brightness of the RGB LEDs on your Wraith Max Cooler.
  • If your motherboard lacks an RGB header or compatible software, the cooler may default to a specific color (e.g., red) or remain unlit, depending on the specific cooler version.

7. 유지관리

Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler.

• 먼지 청소: Periodically (every 3-6 months, or more often in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan does not spin rapidly during cleaning to prevent damage to the bearings.
• 열전도 페이스트: Thermal paste typically lasts for several years. If you notice increased CPU temperatures, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning old paste from both the CPU and cooler base, and applying new paste before reinstallation.
• 팬 검사: Check the fan for any signs of damage, unusual noises, or obstructions. Replace the cooler if the fan is damaged or malfunctioning.

8. 문제 해결

• 높은 CPU 온도:
  • 쿨러가 단단히 고정되어 있고 CPU와 제대로 접촉하고 있는지 확인하십시오.
  • Verify that the fan is spinning. If not, check the fan power connection to the motherboard.
  • 써멀 페이스트가 제대로 도포되었는지, 또는 재도포가 필요한지 확인하십시오.
  • 방열판 핀에 쌓인 먼지를 깨끗이 닦아내십시오.
  • PC 케이스 내부에 적절한 공기 흐름이 유지되도록 하십시오.
• 팬이 회전하지 않음:
  • Check the 4-pin fan cable connection to the "CPU_FAN" header on the motherboard.
  • Verify fan settings in the motherboard's BIOS/UEFI.
  • 팬 날개가 막히지 않았는지 확인하세요.
• RGB Lights Not Working/Incorrect Color:
  • Check the RGB LED cable connection to the motherboard's RGB header. Ensure it's connected to the correct type of header (e.g., 12V GRB for 4-pin).
  • 메인보드의 RGB 소프트웨어가 올바르게 설치 및 구성되었는지 확인하십시오.
  • Ensure the RGB cable is fully seated and not damaged.

9. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 AMD 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

추가 지원을 받으려면 다음을 방문하세요. AMD 지원 web대지.