1. 서론
This manual provides instructions for the installation, operation, and maintenance of your new AT Cartridge and Stylus. This product is designed to deliver high-quality audio reproduction for compatible Sony turntable models. Please read this manual thoroughly before installation and use.
호환 모델: Sony PS-FL77, PS-FL770, PS-FL9, PS-FL99, PS-LX410, PS-LX500, PS-LX510, PS-LX520, PS-LX57, PS-LX910.
2. 안전 정보
- Handle the cartridge and stylus with care. The stylus tip is delicate and can be damaged by improper handling.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 스타일러스 펜촉을 손가락으로 만지지 마세요.
- Ensure your turntable is powered off and unplugged before attempting installation or maintenance.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- AT Cartridge with pre-installed Stylus
- 스타일러스 가드
- 고정 볼트
- 여분 스타일러스
4. 설정 및 설치
Follow these steps to install the AT Cartridge and Stylus onto your compatible Sony turntable.
- Prepare Turntable: Ensure your turntable is turned off and unplugged from the power outlet. Carefully remove any existing cartridge or stylus from the tonearm. Refer to your turntable's specific manual for detailed instructions on removing the old cartridge.
- Attach Cartridge: Align the new AT Cartridge with the headshell of your turntable's tonearm. Use the provided fixing bolt to secure the cartridge firmly but gently. Do not overtighten.

Image 1: AT Cartridge with fixing bolt. This image shows the main cartridge unit with the included fixing bolt, ready for installation onto a turntable's headshell.
- Install Stylus (if not pre-installed): If the stylus is separate, carefully hold the cartridge body and insert the stylus assembly into the front of the cartridge until it clicks into place. Ensure the stylus guard is in the down position to protect the tip during handling.

Image 2: AT Cartridge with stylus guard. This image displays the cartridge with the protective stylus guard in place, indicating proper protection for the delicate stylus tip.

Image 3: Close-up of green replacement stylus. This image provides a detailed view of the green replacement stylus, highlighting its design and the delicate needle tip.
- Balance Tonearm and Set Tracking Force: Refer to your turntable's manual for instructions on balancing the tonearm and setting the tracking force. The recommended downforce for this cartridge is 1.0-1.5그램. Proper tracking force is crucial for optimal sound quality and to prevent record and stylus wear.
- 턴테이블 연결: Once the cartridge is securely installed and the tonearm is balanced, reconnect your turntable to your audio system and power it on.
5. 사용 설명서
With the cartridge installed, operate your turntable as usual. Ensure the stylus guard is removed before playing a record. Gently lower the tonearm onto the record's lead-in groove. For best results, keep your records clean and free of dust.
6. 유지관리
- 스타일러스 청소: Use a soft brush, specifically designed for stylus cleaning, to gently brush the stylus tip from back to front. Never brush from front to back or side to side, as this can damage the stylus. Clean regularly to remove dust and debris.
- 스타일러스 교체: The stylus has a finite lifespan. Replace the stylus when you notice a degradation in sound quality, increased surface noise, or visible wear on the stylus tip. Use the provided spare stylus or purchase a genuine AT replacement stylus.
- Cartridge Cleaning: Wipe the cartridge body with a soft, dry cloth. Avoid using liquids or solvents.
7. 문제 해결
- 소리가 안 나거나 아주 약하게 들림:
- 턴테이블에서 본체까지의 모든 연결부를 확인하십시오. amp리시버/리시버.
- Ensure the cartridge is properly seated and connected to the headshell.
- 확인해주세요 amp앰프 입력이 '포노'로 설정되어 있습니다.
- 소리가 왜곡되거나 끊기는 현상:
- Check the tracking force. It should be set between 1.0-1.5 grams.
- Inspect the stylus for damage or debris. Clean or replace if necessary.
- 레코드가 깨끗하고 흠집이 없는지 확인하십시오.
- 턴테이블이 수평인지 확인하십시오.
- 허밍 소음:
- Ensure the turntable's ground wire (if applicable) is properly connected to your amp리시버/리시버.
- 다른 전자 장치의 간섭을 확인하십시오.
8. 사양
| 주파수 응답 | 20-22,000Hz |
| 채널 분리(1kHz) | > 22dB |
| 권장 다운포스 | 1.0-1.5그램 |
| 제품 치수 | 0.39 x 0.39 x 0.39 인치 |
| 모델 번호 | 4330367153 |
9. 보증 및 지원
This AT Cartridge and Stylus is manufactured by Audio-Technica. For specific warranty information and technical support, please refer to the official Audio-Technica web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.