1. 제품 오버view
The LGB W180SX is a replacement pump designed for commercial dishwashers and glasswashers. It is compatible with various models from Colged (BETA-235, SILVER-35, 914169, 915585) and Elettrobar (913289, 913290, 913356, 913372, 913373). This pump is engineered for reliable performance in demanding commercial environments.
Image 1.1: The LGB W180SX dishwasher pump, showing its motor, capacitor, and water inlet/outlet connections. This pump is a critical component for water circulation in commercial dishwashing units.
Key features include its robust construction, specific electrical requirements (230V, 50Hz), and integrated 5 µF capacitor, ensuring efficient operation. Its design facilitates a right-hand rotation direction, crucial for proper water flow within the appliance.
2. 사양
Detailed technical specifications for the LGB W180SX pump are provided below:
| 기인하다 | 값 |
|---|---|
| 모델 번호 | W180SX |
| 제조업체 참조 | 4251391379251 |
| 상표 | LGB |
| 애플리케이션 | Dishwashers, Glasswashers |
| 재료 | 플라스틱 |
| 전원 | 전기 케이블 |
| 권tage | 230V(XNUMXV) |
| 빈도 | 50Hz |
| 전력 출력 | 0.19kW / 0.26마력 |
| 콘덴서 | 5 µF (included) |
| 회전 방향 | 오른쪽 |
| 길이 | 220mm (XNUMXmm) |
| 단계 수 | 1 |
3. 설정 및 설치
Proper installation is crucial for the safe and efficient operation of the pump. It is recommended that installation be performed by a qualified technician.
3.1 안전 예방 조치
- 전원 분리: Always ensure the dishwasher's main power supply is disconnected before beginning any installation or maintenance work.
- 보호 장비를 착용하세요: 장갑과 보안경 등 적절한 개인 보호 장비(PPE)를 착용하십시오.
- 조심스럽게 다루십시오: The pump may contain residual water; handle carefully to avoid spills.
3.2 필요한 도구
- 드라이버(십자 드라이버 및 일자 드라이버)
- 펜치
- 렌치 (조절식 또는 특정 사이즈)
- Bucket or towels for water collection
3.3 설치 단계
- 펌프에 접근하세요: Locate and access the existing pump within the dishwasher unit. This may require removing panels or other components.
- 배수 물: Ensure all water is drained from the dishwasher and pump housing.
- 배선 분리: Carefully disconnect the electrical wiring from the old pump, noting the connections for reassembly. Take a photo if necessary.
- Disconnect Hoses/Pipes: Detach all water hoses and pipes connected to the old pump. Be prepared for residual water.
- 오래된 펌프 제거: Unmount and remove the old pump from its housing.
- 새 펌프 설치: Position the new LGB W180SX pump in the designated location. Ensure it is securely mounted.
- Reconnect Hoses/Pipes: Reattach all water hoses and pipes to the new pump, ensuring all connections are tight and leak-free.
- 배선을 다시 연결하세요: Connect the electrical wiring to the new pump according to the noted connections. Ensure all connections are secure and insulated.
- 설치 확인: Double-check all connections, mounting, and wiring before reassembling the dishwasher panels.
4. 사용 설명서
Once the LGB W180SX pump is correctly installed, the dishwasher can be operated normally. The pump functions automatically as part of the dishwasher's wash cycle.
- 초기 테스트 실행: After installation, perform a short test cycle with the dishwasher to check for proper pump operation and any leaks.
- 비정상적인 소음에 귀 기울여 보세요: During operation, listen for any unusual grinding, humming, or rattling noises, which could indicate an issue.
- 물 순환을 확인하세요: Observe if water is circulating effectively within the dishwasher during the wash cycle.
5. 유지관리
Regular maintenance helps extend the lifespan of your pump and ensures optimal dishwasher performance. Always disconnect power before performing maintenance.
- 누출을 검사하세요: Periodically check hose connections and pump seals for any signs of water leakage.
- Clean Filter/Strainer: If accessible, regularly clean the dishwasher's main filter and any strainer located near the pump inlet to prevent debris from entering the pump.
- 전기 연결 확인: Ensure all electrical connections to the pump remain secure and free from corrosion.
- 변화를 들어보세요: Pay attention to any changes in the pump's operating sound, which might indicate wear or an impending issue.
6. 문제 해결
This section provides guidance for common issues you might encounter with the pump. For complex problems, consult a qualified technician.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않음 | 전원 공급이 없습니다 느슨한 전기 연결 모터 고장 | Check dishwasher power Verify and secure wiring Consult technician for motor diagnosis/replacement |
| 물 순환 불량 | Clogged filter/strainer Impeller obstructed by debris 손상된 임펠러 | Clean dishwasher filter and pump strainer Inspect and clear impeller area Replace pump if impeller is damaged |
| 시끄러운 작동 | Foreign object in pump 마모된 베어링 느슨한 장착 | 검사하고 이물질을 제거하세요 Pump replacement may be necessary 펌프가 단단히 고정되었는지 확인하십시오. |
| 물 누출 | 느슨한 호스 연결 손상된 씰/개스킷 펌프 하우징 균열 | 호스를 조이세요amps Replace seals/gaskets 펌프 교체 |
7. 보증 및 지원
For warranty information, please refer to the terms provided by your original point of purchase or the manufacturer, LGB. As per available information, details regarding the availability of spare parts for this specific model are currently unavailable.
If you require technical assistance, troubleshooting beyond this manual, or information on spare parts, please contact the seller or a certified appliance repair professional.
Note: This manual provides general guidance. Specific dishwasher models may have unique access or installation requirements. Always refer to your dishwasher's service manual for detailed instructions.