Fractal Design Focus G Mid Tower Computer Case User Manual

소개

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Fractal Design Focus G Mid Tower Computer Case. Designed for high airflow and versatile component compatibility, the Focus G offers a robust foundation for your PC build.

이미지: 앞면과 측면 view of the Fractal Design Focus G Mid Tower Computer Case, showcasing the windowed side panel and mesh front panel.

주요 특징

• Contemporary ATX Case Design: Accommodates high-performance components with efficient space utilization for a compact footprint.
• Windowed Side Panel: A large windowed side panel allows for showcasing internal hardware.
• 높은 기류: Includes two pre-installed Fractal Design Silent Series LL 120mm white LED fans. Supports a total of six fan positions.
• 먼지 필터: Filtered front, top, and base air intakes ensure a dust-free interior.
• 냉각 지원: Compatible with high-profile CPU coolers, multiple radiator configurations, and graphics cards up to 380mm long.
• 유연한 스토리지 옵션: Features two vibration-dampened universal drive bays (supporting 6TB+ HDDs and 15mm SSDs) and an additional 2.5" mount behind the motherboard tray.

명세서

이미지: 차원적view of the Fractal Design Focus G case, showing its height, width, and depth.

설정 및 구성 요소 설치

The Fractal Design Focus G case is designed for straightforward assembly. Follow these steps for optimal component installation.

1. 사건 준비

Remove the side panels by unscrewing the thumbscrews at the rear of the case. Gently slide the panels backward and lift them off. The front panel can also be removed by pulling from the bottom for fan installation or cleaning.

Image: Front panel detached from the Fractal Design Focus G case, revealing the pre-installed fans and internal structure.

2. 마더보드 설치

Install the necessary motherboard standoffs into the motherboard tray. Carefully align your ATX, Micro ATX, or Mini ITX motherboard with the standoffs and secure it with screws. Ensure all screws are tightened to prevent movement.

3. 전원 공급 장치(PSU) 설치

The PSU mounts at the bottom of the case. Slide your ATX PSU into its designated slot and secure it with screws from the rear of the case. Route the necessary power cables through the cable management cutouts.

4. 저장 드라이브 설치

Utilize the two vibration-dampened universal drive bays for 3.5" HDDs or 2.5" SSDs. An additional 2.5" SSD can be mounted behind the motherboard tray. Secure drives using the provided screws.

5. 그래픽 카드 및 확장 카드 설치

Install your graphics card and other PCI-E expansion cards into the motherboard slots. The case features fully removable and reusable PCI-E slot covers, which are secured with thumbscrews for convenience.

6. 케이블 관리

The case provides multiple cutouts and tie-down points behind the motherboard tray for efficient cable routing. This helps maintain optimal airflow and a clean interior aesthetic.

케이스 작동 방법

전면 I/O 패널은 필수 포트 및 제어 장치에 편리하게 접근할 수 있도록 설계되었습니다.

• 전원 버튼: Located on the top panel, used to power on/off the system.
• 재설정 버튼: Also on the top panel, for system reset.
• USB 3.0 포트: Two high-speed USB 3.0 ports for data transfer.
• USB 2.0 포트: Two USB 2.0 ports for peripheral connections.
• 오디오 잭: Separate microphone and headphone jacks.

Ensure all internal front panel headers are correctly connected to your motherboard for full functionality.

유지

정기적인 유지 관리는 컴퓨터 케이스의 최적 성능과 수명 연장을 보장합니다.

• 먼지 필터 청소: The front, top, and bottom panels feature removable dust filters. Regularly clean these filters to prevent dust buildup and maintain airflow. For the front filter, a vacuum cleaner can be used without removal. Top filters are screwed in and require removal for thorough cleaning. The bottom filter is held by metal tabs and can be slid out.
• 내부 청소 : Periodically clean the interior of the case with compressed air to remove dust from components and internal surfaces.
• 외부 청소: 부드러운 d로 외부 표면을 닦아냅니다.amp 옷감. 연마성 세제를 피하십시오.

문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

• Missing Motherboard Standoff: If a motherboard standoff is missing, ensure you acquire a replacement to properly secure your motherboard and prevent short circuits.
• Difficulty with USB 3.0 Front Panel Header: The USB 3.0 front panel header can be difficult to connect or disconnect from the motherboard. Exercise extreme caution to avoid damaging the motherboard pins or the cable connector. If frequent disconnection is needed, consider using a USB 3.0 to USB 3.1 adapter cable for easier handling.
• Limited Space for Cables: While the case offers cable management options, space behind the motherboard tray can be minimal. Plan your cable routing carefully, especially for thick PSU cables, to ensure side panels close properly.
• Top Fan/Radiator Clearance: If using an external 5.25" drive in the top bay, one of the top fan/radiator positions might be obstructed. Plan your cooling setup accordingly.
• SSD Placement (Rear): The 2.5" SSD mount behind the motherboard tray has limited airflow. Avoid placing high-heat producing SSDs in this location if possible.

공식 제품 영상

Watch the official Fractal Design Focus G Series overview video for a visual guide to its features and capabilities.

보증 및 지원

The Fractal Design Focus G case comes with a 2-year warranty. For warranty claims, technical support, or any inquiries, please visit the official Fractal Design web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.

공식적인 Web대지: www.fractal-design.com

For additional support and resources, you may also visit the 아마존에서 프랙탈 디자인 스토어를 만나보세요.