1. 중요한 안전 정보
Please read all instructions carefully before using the miliboo MTT602II-AL tripod. Retain this manual for future reference.
- Always ensure all locks and levers are securely fastened before mounting equipment or adjusting the tripod.
- Do not exceed the maximum load capacity of 22 pounds (10 kg). Overloading can cause instability and damage to equipment.
- Avoid exposing the tripod to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
- Keep hands and fingers clear of moving parts, especially when extending or folding the legs, to prevent pinching.
- When transporting the tripod with a camera mounted, ensure the camera is securely attached and all head movements are locked. For long-distance transport, it is recommended to remove the camera.
- Use the included carrying case for safe storage and transport to protect the tripod from damage.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 삼각대 본체
- MYT802 II Fluid Head
- 퀵 릴리스 플레이트
- 핸들
- 운반 케이스
- 1/4-inch Screw
- 3/8-inch Screw
- Mini Wrench (3 pieces)
- 사용자 설명서
Figure 2.1: Included components of the miliboo MTT602II-AL package.
3. 제품 오버view
The miliboo MTT602II-AL is a professional heavy-duty aluminum tripod designed for stable video and photography support. It features a robust construction and a smooth hydraulic head for precise camera movements.
그림 3.1: 이상view of the miliboo MTT602II-AL tripod.
주요 특징:
- Professional Stability: Heavy-duty aluminum construction with 14-20mm diameter tubing and 1.2mm wall thickness. Extends from 33.1 inches to 76.4 inches for versatile shooting angles, supporting up to 22 pounds (10 kg).
- Smooth Hydraulic Head (MYT802 II): Features precision steel bearings and anti-freeze shock-absorbing fluid. Offers 360° horizontal rotation and a +90° to -75° tilt range for dynamic balancing.
- Multi-functional Compatibility: Universal 1/4-inch and 3/8-inch threaded mounts accommodate DSLRs, camcorders, projectors, telescopes, and binoculars. Includes a quick-release plate with a safety lock.
- 사용자 친화적인 디자인: Built-in spirit level for accurate leveling, switchable left/right handles, and a red trigger lock with anti-pinch safety. A center spreader enhances stability.
Figure 3.2: Close-up of the MYT802 II Hydraulic Head.
4. 설정
4.1 포장 해제 및 초기 조립
- 휴대용 케이스에서 모든 구성품을 조심스럽게 꺼내십시오.
- Place the tripod body on a flat, stable surface.
- Release the leg locks (red buckles) on each leg to allow them to extend.
- Extend the legs to the desired height. The tripod features a three-section height adjustment.
- Engage the center spreader by pressing down on the central mechanism until it locks into place, ensuring the legs are evenly spread for maximum stability.
Figure 4.1: Tripod height adjustment from 33 inches to 75 inches.
4.2 유압 헤드 부착
The MYT802 II fluid head comes pre-attached to the tripod body. If it needs to be re-attached or removed:
- Ensure the tripod base is stable.
- Align the base of the fluid head with the tripod's mounting platform.
- Secure the head by tightening the locking knob located beneath the head until it is firmly in place.
4.3 카메라 장착하기
The quick-release plate supports both 1/4-inch and 3/8-inch screws for wide compatibility.
- 유압 헤드의 퀵 릴리스 플레이트를 찾으십시오.
- Press the red safety lock button and slide the quick-release plate out of the head.
- Attach the quick-release plate to the bottom of your camera or compatible device using the appropriate 1/4-inch or 3/8-inch screw. Ensure it is tightened securely.
- Slide the camera with the attached quick-release plate back into the fluid head until it clicks into place. Verify the safety lock is engaged.
Figure 4.2: Quick Release Plate and Compatibility.
5. 사용 설명서
5.1 Adjusting Tripod Height and Stability
- To adjust the height, release the red buckle leg locks on each leg section.
- Extend or retract the leg sections to the desired height.
- Securely fasten all leg locks to ensure stability before use.
- For uneven terrain, adjust each leg independently to level the tripod. Use the built-in spirit level on the fluid head for precise leveling.
5.2 Using the Fluid Head (Pan and Tilt)
The MYT802 II hydraulic head allows for smooth and controlled camera movements.
- 기울기 조정: Loosen the tilt lock knob on the side of the fluid head. Adjust the camera to the desired vertical angle (from +90° to -75°). Tighten the tilt lock knob to secure the position.
- 팬 조정: Loosen the pan lock knob at the base of the fluid head. Rotate the camera horizontally to the desired angle (360°). Tighten the pan lock knob to secure the position.
- The handle can be attached to either side of the fluid head for comfortable operation.
Figure 5.1: Fluid head panning and tilting range.
5.3 공식 제품 영상
Video 5.1: This video demonstrates the key features and operational aspects of the miliboo MTT602II-AL Professional Video Tripod, including its setup, fluid head movements, and quick-release plate functionality. It highlights the tripod's stability and ease of use for professional photography and videography.
6. 유지관리
Proper maintenance ensures the longevity and optimal performance of your miliboo MTT602II-AL tripod.
- 청소: 삼각대를 사용한 후에는 부드럽고 마른 천으로 닦아 먼지와 이물질을 제거하세요. 찌든 때는 가볍게 두드려 닦아주세요.amp 부드러운 천과 순한 비누로 닦은 후 완전히 말리세요. 강한 화학 약품이나 연마성 세척제는 사용하지 마세요.
- 매끄럽게 하기: The hydraulic head is factory-lubricated. Do not attempt to disassemble or lubricate the internal components of the fluid head yourself, as this may void the warranty.
- 저장: Store the tripod in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged or loosely engaged during storage to prevent stress on the mechanisms.
- 점검: Periodically check all screws, bolts, and moving parts for tightness. Tighten any loose fasteners with the provided mini wrench.
7. 문제 해결
삼각대 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 삼각대가 불안정하거나 흔들립니다. | Leg locks not fully engaged; center spreader not locked; uneven ground; overloaded. | Ensure all leg locks are securely fastened. Verify the center spreader is fully engaged. Adjust leg lengths to level the tripod on uneven surfaces. Check that the mounted equipment does not exceed the 22-pound (10 kg) weight limit. |
| 유체 헤드의 움직임은 부드럽지 않습니다. | Pan/tilt lock knobs are too tight; debris in the head mechanism. | Loosen the pan and tilt lock knobs slightly. Clean the exterior of the head. If the issue persists, contact customer support. Do not attempt to disassemble the head. |
| Camera cannot be mounted or removed from the quick-release plate. | Quick-release plate not properly aligned; safety lock engaged; plate screw loose. | Ensure the quick-release plate is correctly aligned with the slot on the fluid head. Press the red safety lock button while inserting or removing the plate. Verify the camera is securely attached to the quick-release plate. |
| 조절 후 다리 부분이 아래로 미끄러져 내려갑니다. | Leg locks are not tightened sufficiently. | Ensure all red buckle leg locks are firmly closed after adjusting the leg height. |
8. 사양
Detailed technical specifications for the miliboo MTT602II-AL Professional Camera Tripod:
- 상표: 밀리부
- 모델 이름: MTT602II-AL
- 재료: 알류미늄
- 색상: 검은색
- 품목 무게: 4.2킬로그램(9.26파운드)
- 중량 제한: 22파운드(10kg)
- 최대 높이: 195센티미터(76.4인치)
- 최소 높이: 84센티미터(33.1인치)
- 접힌 크기: 7.3인치 깊이 x 7.3인치 너비 x 35.9인치 높이
- 삼각대 헤드 유형: Fluid Head (MYT802 II)
- 다리 직경: 14-20 Millimeters
- Number of Leg Sections: 3
- 호환 장치: Camcorder, Camera (DSLRs, MILC, Telephoto SLR, Home DV)
- 팬 범위 : 360°
- 기울기 범위 : +90° ~ -75°
- 장착 나사: 1/4인치와 3/8인치
- 방수 수준: 방수가 되지 않음
Figure 8.1: Tripod demonstrating its 22-pound load capacity.
9. 보증 및 지원
9.1 제조업체 보증
The miliboo MTT602II-AL Professional Camera Tripod comes with a 2년 제조사 보증 from shanghai Tekcare industrial Ltd. This warranty covers defects in materials and workmanship under normal use.
보증 청구를 위해 구매 증명서를 보관하십시오.
9.2 고객 지원
For any questions, technical assistance, or warranty claims, please contact miliboo customer support. Our team is available to provide support and resolve any issues you may encounter.
- 온라인 지원: Visit the official miliboo webFAQ 및 지원 리소스를 위한 사이트입니다.
- 이메일 지원: 제품 포장이나 공식 문서를 참조하세요. web전용 고객 지원 이메일 주소 사이트입니다.
- 응답 시간: 문의 사항에 대해서는 24시간 이내에 답변을 드리겠습니다.