1. 서론
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI). This Uninterruptible Power Supply (UPS) is designed to provide high-density, true double-conversion online power protection for critical electronic equipment, including servers, voice/data networks, medical labs, and light industrial applications. Please read this manual thoroughly before installing or operating the UPS to ensure proper and safe usage.
2. 안전 정보
Observe all warnings and operating instructions in this manual. Failure to do so may result in injury or equipment damage. This UPS contains hazardous voltag예. 제품을 분해하려고 시도하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
일반 안전
- 이 UPS는 실내에서만 사용하도록 설계되었습니다.
- 직사광선이나 액체와 접촉하는 곳, 먼지나 습도가 과도한 곳에서는 이 UPS를 작동하지 마세요.
- Ensure the ventilation openings on the UPS are not blocked. Maintain adequate clearance around the unit for proper airflow.
- Connect the UPS power cable directly to a grounded wall outlet. Do not use extension cords or surge suppressors.
배터리 안전
- Batteries are heavy. Remove the battery module before installing the UPS in a rack or tower configuration.
- Battery service should be performed or supervised by personnel knowledgeable of batteries and the required precautions.
- 배터리를 불 속에 버리지 마십시오. 배터리가 폭발할 수 있습니다.
- 배터리를 열거나 훼손하지 마십시오. 방출된 전해질은 피부와 눈에 해롭습니다. 독성이 있을 수 있습니다.
- 배터리를 원래 설치된 것과 동일한 종류와 개수의 배터리로 교체하십시오.
3. 패키지 내용
Carefully unpack the unit and inspect for shipping damage. If any damage is found, notify the carrier and dealer. The package should contain the following items:
- APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI) unit
- Battery module (may be pre-installed or separate)
- Rack-mounting hardware (rails, brackets)
- Tower stand (for tower configuration)
- USB 통신 케이블
- 직렬 통신 케이블
- 문서 CD
- Safety information and warranty guide
4. 제품 오버view
The APC Smart-UPS SRT 3000VA RM 230V is a high-performance Uninterruptible Power Supply designed to protect your critical equipment from power disturbances. It features a rack/tower convertible form factor for flexible deployment.
그림 1: 전면 view of the APC Smart-UPS SRT 3000VA RM 230V. This image displays the front panel with the LCD display, control buttons, and ventilation grilles.
주요 구성 요소
- Front Panel LCD Display: Provides real-time status information, configuration options, and alarm notifications.
- 제어 버튼: Used to navigate the LCD menu, power on/off the UPS, and perform self-tests.
- 배터리 모듈: 정전 시 백업 전원을 제공합니다.tages. Hot-swappable for easy replacement.
- 입력 전원 커넥터: 무정전 전원 공급 장치를 전원 콘센트에 연결합니다.
- Output Receptacles (IEC 320): Provide protected power to connected equipment.
- Communication Ports (USB, Serial): For connecting to a computer or network management card for monitoring and control.
- EPO(비상 전원 끄기) 포트: Allows for remote emergency shutdown of the UPS.
5. 설정
Follow these steps for initial setup of your UPS.
1 단계 : 위치 선택
- Place the UPS on a sturdy, level surface or install it in a standard 19-inch rack.
- Ensure the ambient temperature is between 0°C and 40°C (32°F and 104°F).
- Maintain at least 10 cm (4 inches) of clearance at the front and rear of the unit for proper ventilation.
Step 2: Install the Battery Module
If the battery module is not pre-installed, slide it into the battery bay until it clicks into place. Connect the battery cables as indicated by the labels.
Step 3: Connect to Utility Power
- Connect the UPS input power cord to a grounded 230V AC outlet.
- The UPS will perform a self-test and the LCD display will illuminate.
4단계: 장비 연결
- Connect your critical equipment (servers, network devices, etc.) to the output receptacles on the rear of the UPS.
- Ensure the total load does not exceed the UPS capacity (3000VA / 2700W).
Step 5: Connect Communication Cables (Optional)
- Connect the USB or serial cable from the UPS to your computer or server for monitoring and graceful shutdown capabilities.
- Install the PowerChute software (available from APC website) on your computer for advanced management.
6. UPS 작동 방법
UPS 전원 켜기
Press and hold the power button on the front panel until you hear a beep. The UPS will start up and provide power to connected equipment.
UPS 전원 끄기
Press and hold the power button until the UPS shuts down. Ensure all connected equipment is safely shut down before powering off the UPS.
LCD 디스플레이 및 내비게이션
The LCD display provides detailed information about the UPS status, battery charge, load level, and various settings. Use the navigation buttons (up, down, enter, escape) to browse through the menus and adjust settings.
셀프 테스트
Regularly perform a self-test to ensure the UPS battery and internal components are functioning correctly. This can typically be initiated via the LCD menu or PowerChute software.
7. 유지관리
배터리 교체
The UPS batteries have a typical lifespan of 3-5 years. The UPS will indicate when the batteries need replacement. Refer to the safety information before attempting battery replacement. Use only APC-approved replacement battery modules (APCRBC152).
청소
Clean the exterior of the UPS with a soft, damp cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
환경 고려 사항
Store the UPS in a cool, dry place when not in use. Avoid extreme temperatures and humidity, which can shorten battery life.
8. 문제 해결
이 섹션에서는 UPS 사용 중 발생할 수 있는 일반적인 문제에 대한 해결책을 제공합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | No utility power; Battery not connected; UPS fault | Check power outlet; Ensure battery cables are connected; Contact APC support if fault persists. |
| UPS에서 계속해서 경고음이 울립니다. | On battery power; Overload; Low battery | Check utility power; Reduce connected load; Allow battery to recharge. |
| 배터리가 충전되지 않음 | Battery disconnected; Battery fault; Internal fault | Verify battery connection; Replace battery if faulty; Contact APC support. |
| 연결된 장비가 전력을 잃음 | UPS overload; Battery depleted; UPS fault | Reduce load; Allow battery to recharge; Contact APC support. |
9. 사양
Detailed technical specifications for the APC Smart-UPS SRT 3000VA RM 230V (SRT3000RMXLI).
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SRT3000RMXLI |
| 상표 | 항공우주국(APC) |
| 용량 | 3000VA / 2700와트 |
| 입력 Voltage | 230 볼트 |
| 출력 볼륨tage | 230 볼트 |
| 폼 팩터 | Rack/Tower Convertible (2U) |
| 배터리 유형 | 납산 |
| 일반적인 실행 시간(최대 부하 시) | 약 4분 |
| 콘센트 수 | 8개의 IEC 320 C13, 2개의 IEC 320 C19 |
| 통신 포트 | USB, Serial (RJ45), SmartSlot |
| 치수(높이 x 너비 x 깊이) | 8.5cm x 43.2cm x 63.5cm(3.35인치 x 17.0인치 x 25.0인치) |
| 무게 | 31.3kg(69파운드) |
| 색상 | 검은색 |
10. 보증 및 지원
보증 정보
APC provides a standard warranty for this product. Please refer to the warranty card included in your package or visit the official APC web해당 지역의 자세한 보증 약관은 해당 사이트를 참조하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
기술 지원
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact APC customer support. Support contact information can typically be found on the APC website or in the documentation provided with your unit. When contacting support, please have your model number (SRT3000RMXLI) and serial number ready.