중요 안전 지침
Read all safety warnings and instructions before operating this power tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep these instructions for future reference.
- Always wear eye protection, such as safety goggles, and hearing protection when operating the drill.
- 작업 공간을 깨끗하고 밝게 유지하세요. 어수선하거나 어두운 공간은 사고를 초래합니다.
- 가연성 액체, 가스, 먼지 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
- 전동 공구를 작동하는 동안 어린이와 주변 사람을 멀리하십시오. 주의가 산만해지면 제어력을 잃을 수 있습니다.
- Use appropriate personal protective equipment. This includes dust masks, non-skid safety shoes, hard hats, or hearing protection as required.
- Ensure the power switch is in the off position before connecting the drill to a power source, picking up or carrying the tool.
- Do not abuse the power cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts.
- Maintain power tools carefully. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool's operation.
- Use the correct power tool for your application. Do not force a small tool or attachment to do the job of a heavy-duty tool.
- 조정을 하거나 액세서리를 교체하거나 전동 공구를 보관하기 전에 전원에서 플러그를 뽑으십시오.
제품 끝view
The Dongcheng DZJ03-13 is a corded electric impact drill designed for drilling into various materials such as metal, plastic, and wood. It features a 500W motor, 13mm chuck capacity, variable speed control, and reversible rotation, making it suitable for both drilling and driving applications.
구성 요소
- Main Body (Motor Housing)
- Chuck (13mm key type)
- 보조 핸들
- 깊이 게이지
- 트리거 스위치
- 잠금 버튼
- 정방향/역방향 스위치
- Mode Selector (Drill / Impact Drill)
Image: The Dongcheng DZJ03-13 Electric Impact Drill, showing the main body, chuck, auxiliary handle, and control switches.
Image: The product packaging for the Dongcheng DZJ03-13 Electric Impact Drill, displaying key specifications like 13mm chuck and 500W power.
설정
- 짐 풀기: Carefully remove the drill and all accessories from the packaging. Inspect the tool for any signs of damage. If any damage is found, do not operate the tool and contact your supplier.
- 보조 핸들 부착: 보조 핸들 cl을 풀어주세요amp by rotating it counter-clockwise. Slide the handle onto the drill's neck. Adjust the handle to a comfortable and secure position, then tighten the clamp 시계 방향으로 돌려서.
- Installing the Depth Gauge: Insert the depth gauge into the designated hole on the auxiliary handle. Adjust its position to control the desired drilling depth. The depth gauge helps prevent drilling deeper than necessary.
- 드릴 비트 삽입:
- Ensure the drill is unplugged from the power source before inserting or removing any accessories.
- Open the chuck jaws by rotating the chuck key counter-clockwise in each of the three holes until the jaws are wide enough to accept the drill bit.
- 드릴 비트를 척에 완전히 삽입하고 중앙에 위치하도록 하십시오.
- Tighten the chuck jaws securely using the chuck key. Rotate the key clockwise in all three holes to ensure the drill bit is firmly gripped and centered.
작동 지침
전원 연결
Connect the drill's power cord to a suitable 220-240V AC power outlet. Ensure the power outlet is properly grounded and rated for the drill's power requirements.
드릴링 모드 선택
The drill features a mode selector switch, typically located on the side or top of the gear housing, to switch between drilling and impact drilling modes.
- For drilling into wood, plastic, or metal, select the 송곳 mode (indicated by a drill bit icon).
- For drilling into masonry, brick, or concrete, select the 임팩트 드릴 mode (indicated by a hammer icon).
정방향/역방향 회전
Use the forward/reverse switch, typically located above the trigger, to select the desired rotation direction.
- For drilling and tightening screws, push the switch to the 앞으로 위치.
- For removing screws or freeing a jammed drill bit, push the switch to the 뒤집다 위치.
시작 및 중지
- 드릴을 작동시키려면 트리거 스위치를 누르십시오.
- 멈추려면 트리거 스위치를 놓으십시오.
- For continuous operation, press the trigger switch and then press the lock-on button. To release the lock-on function, press the trigger switch again.
가변 속도 제어
The drill features variable speed control. The speed can be adjusted by the pressure applied to the trigger switch. For precise drilling, start at a lower speed and gradually increase as needed. This allows for better control, especially when starting a hole or working with delicate materials.
드릴링 팁
- Always secure the workpiece firmly to prevent it from moving during drilling.
- Apply steady, even pressure to the drill. Avoid excessive force, which can damage the drill bit or the workpiece.
- Do not force the drill. Allow the drill bit to do the work.
- Allow the drill to reach full speed before contacting the workpiece to ensure a clean start.
- 깊은 구멍을 뚫을 때는 주기적으로 드릴 비트를 빼내어 칩을 제거하고 비트가 식도록 하십시오.
유지
Regular maintenance ensures the longevity, efficiency, and safe operation of your Dongcheng DZJ03-13 Electric Impact Drill. Always unplug the tool before performing any maintenance.
- 청소: After each use, clean the drill with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage plastic parts. Keep ventilation openings clear of dust and debris to prevent overheating.
- 척 유지관리: Periodically clean the chuck jaws to ensure proper grip on drill bits. If the chuck becomes stiff or difficult to operate, apply a small amount of light machine oil or lubricant to the threads and jaws.
- 카본 브러쉬: The carbon brushes are wear items and may need replacement after extended use. Reduced power or intermittent operation can indicate worn brushes. This procedure should ideally be performed by a qualified service technician to ensure proper installation and tool function.
- 코드 검사: Regularly inspect the power cord for any signs of damage, such as cuts, fraying, or exposed wires. A damaged cord can pose a serious electrical hazard. Replace damaged cords immediately with an original replacement part or have it repaired by a qualified professional.
- 저장: Store the drill in a dry, secure place, away from moisture and extreme temperatures. Keep it out of reach of children and unauthorized users.
문제 해결
고객 서비스에 문의하기 전에 일반적인 문제에 대한 다음 문제 해결 가이드를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 드릴이 시작되지 않습니다 | 전원 공급 없음; 전원 코드 손상; 스위치 결함; 카본 브러시 마모 | Check power outlet and circuit breaker; Inspect and replace power cord if damaged; Contact service center for switch or brush replacement. |
| 드릴 비트가 척에서 미끄러짐 | Chuck not tightened properly; Chuck jaws are dirty or worn; Drill bit shank is damaged or oily | Re-tighten chuck securely with the chuck key in all three holes; Clean chuck jaws; Use a clean, undamaged drill bit. |
| 과도한 진동이나 소음 | Loose components; Worn bearings; Bent or damaged drill bit; Improperly installed auxiliary handle | Check for and tighten any loose screws; Replace bent drill bit; Ensure auxiliary handle is secure; Contact service center for internal issues. |
| 드릴이 과열됩니다 | Overload (too much pressure); Blocked ventilation slots; Continuous heavy use | Reduce pressure and allow the drill to work at its own pace; Clear all ventilation slots; Allow the drill to cool down periodically during extended use. |
명세서
- 모델: DZJ03-13
- 전원 입력: 500 와트
- 척 용량: 13mm (XNUMXmm)
- 전원: 코드식 전기
- Amp나이: 14 Amps
- 권tage: 220-240V AC (Typical for region)
- 특별 기능: Variable Speed, Reversible Rotation, Impact Function
- 재료: Plastic (housing), Metal (chuck, internal components)
- 품목 무게: 약 2.5kg (2500그램)
- 크기(가로x세로x높이): 약 30×8×22 cm
- 포함된 구성 요소: Electric Impact Drill, Auxiliary Handle, Depth Gauge, Chuck Key
보증 및 지원
This Dongcheng product is manufactured to high-quality standards and is designed for reliable performance. For specific warranty information, including terms, conditions, and duration, please refer to the warranty card included with your original purchase or visit the official Dongcheng web최신 정보를 확인하려면 해당 사이트를 방문하세요.
For technical support, service, or inquiries regarding spare parts, please contact your local authorized Dongcheng service center or the retailer from whom the product was purchased. When contacting support, please have your product model number (DZJ03-13) and purchase date readily available.
Note: Always retain your purchase receipt or proof of purchase, as it is typically required for any warranty claims.