소개
This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Jaclo 631-4-72-SB 1/2" Nom. Copper x 3/5" O.D. Compression Extension Valve Kit with Contemporary Cross Handle, Satin Brass. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
제품 끝view
The Jaclo 631-4-72-SB is a high-quality compression extension valve kit designed for various plumbing fixtures, including tub and shower faucets and accessories. It features a contemporary cross handle and a satin brass finish, manufactured in the United States.
- 연결 유형: 1/2" Nominal Copper x 3/5" O.D. Compression
- 핸들 스타일: Contemporary Cross Handle
- 마치다: 새틴 황동
- 애플리케이션: Plumbing Fixtures, Tub and Shower Faucets and Accessories
- 기원: 미국에서 제조되었습니다
Image: Jaclo 631-4-72-SB Valve Kit with Contemporary Cross Handle in Satin Brass finish. This image shows the valve body and the distinctive cross-shaped handle.
안전 정보
경고: Improper installation or use can lead to water damage, injury, or property damage. Always follow these safety guidelines:
- 배관 작업을 하기 전에 항상 메인 급수 밸브를 잠그십시오.
- 안전 안경, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- 급수 재개 전에 모든 연결부가 단단히 고정되어 있고 누수가 없는지 확인하십시오.
- Do not overtighten fittings, as this can damage the valve or pipes.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Jaclo 631-4-72-SB Compression Extension Valve Body
- Contemporary Cross Handle
- Mounting Hardware (if applicable, typically included with valve kits)
Note: Specific small components like escutcheons or trim may vary. Refer to your product packaging for a precise list.
설정 및 설치
This section outlines the general steps for installing the Jaclo 631-4-72-SB valve kit. Professional installation is recommended.
필요한 도구 및 재료(포함되지 않음):
- 조정 가능한 렌치
- Pipe Cutter (if modifying existing copper pipe)
- Thread Sealant Tape (PTFE tape) or Pipe Dope
- Bucket or Towels (for catching residual water)
설치 단계:
- 물 공급을 차단하세요: Locate the main water shut-off valve for your home or the specific area where you are working and turn it off completely. Open a nearby faucet to relieve pressure and drain any remaining water from the lines.
- 연결 지점을 준비하세요: Ensure the existing 1/2" nominal copper pipe and 3/5" O.D. compression connection points are clean, free of debris, and properly sized for the valve.
- 나사산 실런트를 바르세요: Apply thread sealant tape (PTFE tape) clockwise around the male threads of the valve's connections, or apply pipe dope as per manufacturer instructions.
- 밸브 연결: Carefully align the valve with the pipe connections. Hand-tighten the compression nuts onto the corresponding fittings.
- 연결을 강화하십시오: Using an adjustable wrench, carefully tighten the compression nuts. Do not overtighten. A quarter to half turn past hand-tight is usually sufficient for a secure, leak-free seal.
- 핸들 설치: Attach the contemporary cross handle to the valve stem. Secure it with any provided set screws or fasteners.
- 누출 확인: Slowly turn the main water supply back on. Carefully inspect all connections for any signs of leaks. If leaks are detected, turn off the water supply, tighten the connection slightly, and recheck.
작동 지침
The Jaclo 631-4-72-SB valve operates with a simple quarter-turn mechanism for water flow control.
- 물 흐름을 활성화하려면: Rotate the contemporary cross handle counter-clockwise until the desired water flow is achieved.
- 물 흐름을 차단하려면: Rotate the contemporary cross handle clockwise until the water flow stops completely.
유지
Regular maintenance ensures the longevity and optimal performance of your Jaclo valve.
- 청소: Clean the satin brass finish with a soft, damp 천을 사용하십시오. 연마성 세제, 독한 화학 물질 또는 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 누출 점검: Periodically inspect the valve and its connections for any signs of leaks. Address any leaks promptly to prevent water damage.
- 작업: Ensure the handle turns smoothly. If it becomes stiff, it may indicate a need for professional servicing.
문제 해결
This section addresses common issues you might encounter with your valve.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Water Leak at Connections | Loose compression nut; insufficient thread sealant; damaged O-ring/gasket. | Turn off water supply. Gently tighten compression nut. If leak persists, disassemble, reapply thread sealant, or replace O-ring/gasket if damaged. |
| 물 흐름 없음 | Main water supply off; valve not fully open; blockage in pipe. | Check if main water supply is on. Ensure valve handle is fully open. If problem persists, consult a plumber for blockage diagnosis. |
| 손잡이가 뻑뻑하거나 돌리기 어렵습니다. | Mineral buildup; internal component wear. | Avoid forcing the handle. This usually requires internal servicing or replacement of valve components. Contact a qualified plumber. |
명세서
| 모델 번호 | 631-4-72-SB |
| 상표 | 자클로 |
| 재료 | 놋쇠 |
| 외부 마감 | 새틴 황동 |
| 입구 연결 유형 | Compression (1/2" Nom. Copper) |
| 콘센트 연결 크기 | 3/5" O.D. Compression (Note: This refers to the outer diameter of the pipe it connects to) |
| 제품 크기(L x W x H) | 12 x 3 x 3 인치 |
| 품목 무게 | 12.6 온스 |
| 한국어: | 020111083822 |
| 제조업체 | 스탠다드 플러밍 서플라이 |
보증 및 지원
For specific warranty information and technical support, please refer to the documentation included with your purchase or visit the official Jaclo website. You may also contact Jaclo customer service directly for assistance with product inquiries, parts, or service.
Jaclo Contact Information: (Typically found on manufacturer's web사이트 또는 제품 포장)
- Web대지: www.jaclo.com (전amp(링크는 실제 링크와 다를 수 있습니다)
- 고객 서비스: 참조하다 web전화번호나 이메일 연락처를 위한 사이트입니다.