시마즈 UW6200H 유니블록 상단 적재형 저울 사용 설명서

소개

This manual provides essential information for the proper setup, operation, and maintenance of your Shimadzu UW6200H UniBloc Top Loading Balance. Designed with the advanced UniBloc mechanism, this balance offers exceptional response, stability, and durability, making it suitable for a wide range of weighing applications. Please read this manual thoroughly before using the balance to ensure safe and accurate operation.

이미지: 앞면 view of the Shimadzu UW6200H UniBloc Top Loading Balance. It features a large stainless steel weighing pan, a green backlit LCD display showing "0.000 g", and a control panel with buttons for POWER, CAL, O/T (Zero/Tare), UNIT, and PRINT. The "UniBloc" logo is visible on the right side of the display.

설정

1. 포장 풀기 및 검사: 포장에서 저울을 조심스럽게 꺼내십시오. 운송 중 파손 흔적이 있는지 모든 구성품을 검사하십시오. 향후 운송 또는 보관을 위해 원래 포장재를 보관하십시오.
2. 위치 선택: Place the balance on a stable, level, and vibration-free surface. Avoid locations exposed to direct sunlight, rapid temperature changes, drafts, or strong electromagnetic fields, as these can affect weighing accuracy.
3. 균형의 회복: Use the adjustable feet at the bottom of the balance and the spirit level (usually located near the display) to ensure the balance is perfectly level. Adjust the feet until the bubble in the spirit level is centered.
4. 전원 연결: Connect the supplied AC adapter to the balance's power input and then plug it into a suitable power outlet.
5. 초기 워밍업: After connecting power, allow the balance to warm up for at least 30 minutes before performing any measurements or calibration. This ensures optimal stability and accuracy.

작동 지침

Basic Weighing Procedure

1. 전원 켜기: 를 누르세요 힘 button to turn on the balance. The display will show "0.000 g" (or the last used unit) after a self-test.
2. Zero/Tare: If using a container, place the empty container on the weighing pan. Press the →O/T← button to zero the display. The display will show "0.000 g" again.
3. 무게: Carefully place the item to be weighed onto the container or directly onto the weighing pan. Wait for the stability indicator (if present) to appear, and then read the displayed weight.
4. 단위 선택: 를 누르세요 단위 button to cycle through available weighing units (e.g., grams, kilograms).
5. 전원 끄기 : 를 누르고 계세요 힘 디스플레이가 꺼질 때까지 버튼을 누르세요.

구경 측정

The Shimadzu UW6200H features internal and fully-automatic calibration functions, ensuring high accuracy. Regular calibration is crucial for precise measurements.

• 자동 교정: The balance may perform automatic calibration at set intervals or upon significant temperature changes. Refer to the on-screen prompts or specific model features for details.
• Manual Internal Calibration: To initiate a manual internal calibration, press the 칼 button. Follow the instructions displayed on the screen. Do not disturb the balance during the calibration process.

Data Output (PRINT)

If connected to a compatible printer or data management system, pressing the 인쇄 button will send the current stable weight reading to the connected device. Refer to the separate interface manual for connection and configuration details.

유지

• 청소:
  • 청소하기 전에 항상 전원 어댑터를 분리하십시오.
  • Wipe the balance exterior with a soft, damp 천. 필요한 경우 중성 세제를 사용하십시오.
  • 연마성 세척제, 용제 또는 독한 화학 물질은 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
  • The weighing pan can be removed for cleaning. Ensure it is dry before re-placing it.
• 환경 관리:
  • Keep the balance free from dust and debris. Consider using a dust cover when not in use.
  • Avoid spilling liquids or powders onto the balance. If a spill occurs, clean it immediately and thoroughly.
• 정기 점검: Periodically check the balance's level and perform calibration to ensure continued accuracy.

문제 해결

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Shimadzu customer support or an authorized service representative.

명세서

보증 및 지원

The Shimadzu UW6200H UniBloc Top Loading Balance is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Shimadzu web자세한 보증 약관은 해당 사이트에서 확인하세요.

For technical support, service, or inquiries regarding spare parts, please contact your local authorized Shimadzu distributor or Shimadzu customer service. Keep your model number (UW6200H) and purchase date ready when contacting support.

You can find more information and contact details on the official Shimadzu web대지: www.shimadzu.com