THINKWARE 후면 View Camera (TWA-X500F750R) Instruction Manual

소개

This manual provides instructions for the installation, operation, and maintenance of the THINKWARE Rear View Camera, model TWA-X500F750R. This camera is designed to be used as an accessory with compatible THINKWARE dash cam main units, specifically the X500, X550, and F770 models, to provide comprehensive surveillance of your vehicle's rear surroundings.

The TWA-X500F750R features a Full HD 1080p camera with a Sony Exmor CMOS Sensor and a 140-degree viewing angle, ensuring wide coverage and clear video capture. When connected to a hardwired main unit, it supports impact and motion detection during Parking Mode, offering dual-channel recording for both front and rear views.

상자 안에 무엇이 들어있나요?

포장 내용물을 확인해 주세요. 누락된 품목이나 손상된 품목이 있을 경우 판매점에 문의해 주십시오.

• 뒤쪽 View Camera (TWA-X500F750R)
• 뒤쪽 View Camera Cable (21 feet / 6.4 meters)
• 빠른 설명

Image: The THINKWARE Rear View 카메라 장치.

설정 및 설치

이 후면 view camera is designed for use with compatible THINKWARE dash cam main units (X500, X550, F770). Ensure your main unit is properly installed and functioning before proceeding with the rear camera installation.

설치 단계:

1. 장착 위치 선택: Choose a location on your vehicle's rear window that provides a clear, unobstructed view. Avoid areas that might interfere with defroster lines or wiper blades. The camera should be positioned centrally for optimal coverage.
2. 깨끗한 표면: Thoroughly clean the chosen area on the rear window with an alcohol wipe and allow it to dry completely. This ensures proper adhesion.
3. Test Orientation: Before permanently attaching the camera, temporarily hold it in place and connect it to the main dash cam unit. Power on the main unit and check the live view (if available) or a recorded clip to confirm the camera's orientation is correct (not upside down or rotated). Adjust as necessary.
4. 카메라 부착: Remove the protective film from the adhesive pad on the camera mount. Firmly press the camera onto the cleaned rear window surface for at least 30 seconds.
5. 케이블 경로: Carefully route the 21-foot connecting cable from the rear camera along the vehicle's headliner, down the side pillars, and to the main dash cam unit. Use cable clips (not included) to secure the cable and hide it for a neat installation. Ensure the cable does not interfere with airbags or other vehicle safety features.
6. 메인 유닛에 연결: Plug the rear camera cable into the designated rear camera port on your THINKWARE main dash cam unit.
7. 전원을 켜고 확인하세요: Power on your main dash cam unit. The rear camera should be automatically detected and begin recording. Verify its operation through the main unit's display or companion app.

이미지: 후면 view camera installed on a vehicle's rear window.

작동 지침

The THINKWARE Rear View Camera operates in conjunction with your compatible THINKWARE main dash cam unit. It does not function as a standalone device.

• 자동 녹음: Once connected and the main dash cam unit is powered on, the rear camera will automatically begin recording simultaneously with the front camera.
• 듀얼 채널 녹화: 비디오 푸tage from both the front and rear cameras is recorded and stored on the main unit's memory card.
• 주차 모드: If your main dash cam unit is hardwired and configured for Parking Mode, the rear camera will also capture impact and motion events in the rear of the vehicle when the ignition is off. Refer to your main dash cam unit's manual for detailed Parking Mode settings and functionality.
• View푸잉tage: 에게 view 푸tage from the rear camera, access the recorded files through your main dash cam unit's display, PC viewer software, or mobile application. Rear camera footage is typically paired with the corresponding front camera footage.

For detailed instructions on specific recording modes, settings, and file management, please refer to the instruction manual of your THINKWARE X500, X550, or F770 main dash cam unit.

유지

Proper maintenance ensures the longevity and optimal performance of your rear view 카메라.

• 렌즈 청소: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn smudges, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens. Avoid abrasive materials or harsh chemicals.
• 본체 청소: 카메라 본체는 마른 천이나 약간 묽은 천으로 닦아주세요.amp 부드러운 천.
• 접착력 확인: Periodically check the camera's adhesive mount to ensure it remains firmly attached to the window. If the adhesive weakens, consider replacing it with a new, strong automotive-grade adhesive pad.
• 케이블 검사: Inspect the connecting cable for any signs of wear, damage, or kinks. Ensure it remains securely routed and connected.
• 온도: Avoid exposing the camera to extreme temperatures for extended periods, as this can affect its performance and lifespan.

문제 해결

If you encounter issues with your THINKWARE Rear View Camera, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact THINKWARE customer support or your authorized retailer.

명세서

보증 및 지원

제조업체 보증:

This THINKWARE Rear View Camera (TWA-X500F750R) is covered by a One-Year Manufacturer's Warranty. This warranty applies only to units sold by authorized retailers. Please retain your proof of purchase for warranty claims.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification or repair.

고객 지원:

For technical assistance, warranty claims, or further inquiries, please contact THINKWARE customer support. You may also reach out to the authorized retailer from whom you purchased the product.

Please visit the official THINKWARE website for the most up-to-date support information, FAQs, and contact details. Having your product model number (TWA-X500F750R) and proof of purchase ready will help expedite the support process.