Powell Z-Bedroom Metal Pewter Twin Loft Study Bunk Bed with Computer Desk Instruction Manual

1. 제품 오버view

The Powell Z-Bedroom Metal Pewter Twin Size Loft Study Bunk Bed with Computer Desk offers a combined sleep, study, and storage solution. This versatile loft bunk features a twin-sized upper bunk and a study desk unit underneath. The desk work surface is designed to accommodate computers or video games, including a pull-out keyboard tray and a suspended storage shelf. Constructed from heavy-gauge powder-coated tubular steel end frames in a unique Z-bedroom shape, with machined aluminum decorative caps and a pewter hi-pressure laminated work surface, this study loft is built for durability.

Powell Z-Bedroom Metal Pewter Twin Loft Study Bunk Bed with Computer Desk

이미지: 앞면 view of the assembled Powell Z-Bedroom Loft Bed with desk and bed area.

2. 안전 경고

To help prevent serious or fatal injuries from entrapment or falls, adhere to the following safety guidelines:

Never allow a child under 6 years old on the upper bunk.
항상 권장 크기의 매트리스나 매트리스 지지대 또는 둘 다를 사용하여 갇히거나 넘어질 가능성을 방지하십시오.
Use only a mattress which is 74" - 75" long and 37-1/2" - 38-1/2" wide on the upper bunk.
Ensure mattress thickness does not exceed 8" and the surface of the mattress is at least 5" below the upper edge of the guardrail.
항상 상단 침대의 긴 양쪽에 난간을 사용하십시오.
이층 침대를 벽 옆에 놓을 경우 침대와 벽 사이에 끼이는 것을 방지하기 위해 침대 전체 길이를 달리는 난간을 벽에 배치해야 합니다.
Prohibit horseplay on or under the bed(s) and prohibit jumping on the bed.
위쪽 침대에 두 명 이상이 앉는 것을 금지합니다.
상부 침대에 출입하려면 사다리를 사용하십시오.
Maximum total weight is not to exceed 300 lbs. on the upper bunk.
가드레일, 사다리 및 기타 구성 요소가 적절한 위치에 있고 손상되지 않았는지, 모든 커넥터가 단단히 조여져 있는지 주기적으로 확인하고 확인하십시오.
Do not use substitute parts. Replacement parts, including additional guardrails, may be obtained from our customer service department.
Use of water or sleep flotation mattresses is prohibited.
야간 조명을 사용하면 이층 침대를 사용하는 어린이에게 추가적인 안전 예방 조치를 제공할 수 있습니다.
상단 침대 끝 부분과 상자에 표시된 경고 정보를 따르십시오.
이 지침을 향후 참고용으로 보관하세요.

STRANGULATION HAZARD: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for examp고리, 벨트, 줄넘기 등을 포함하나 이에 국한되지 않습니다.

3. 부품 목록

Before beginning assembly, ensure all parts are present and accounted for. Refer to the detailed assembly diagrams for specific part identification and quantities. The main components include:

Left and Right End Frames (A, B)
Upper Bunk Side Rails (C, D)
Desk Support Bars (E, F)
Ladder (G)
Bottom Cross Bar (H)
Bed Slats (O, P)
Desk Surface (U)
Keyboard Tray (J)
Suspended Storage Shelf (Q)
Various bolts, washers, and nuts (Dd, Z, Y, X, Aa, Bb, Cc, Ee, Gg)

A complete hardware pack is included. If any parts are missing or damaged, contact customer service for assistance.

Assembly Diagram Step 17 showing parts J, L, K, Dd, X, Gg

Image: Detailed diagram illustrating the connection of parts J, L, K with hardware Dd, X, Gg during assembly.

4. 조립 설명서

Assembly requires two adults and a clear, spacious work area. Follow the steps carefully. Do not fully tighten bolts until instructed.

동영상 가이드 :

Video: Comprehensive assembly guide for the Powell Pewter Student Loft Bed.

단계별 지침:

Step 1: Attach Levelers to End Frames. Secure the levelers (Ff) to the bottom of the Left (A) and Right (B) End Frames. Ensure they are firmly in place.
Image: Illustration of attaching levelers to the base of the end frames.
Step 2: Connect Upper Bunk Side Rails. Attach the Upper Bunk Side Rails (C and D) to the Left (A) and Right (B) End Frames using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the connection of side rails C and D to end frames A and B.
Step 3: Secure Upper Bunk Side Rails. Fasten the remaining connections for the Upper Bunk Side Rails (C and D) to the End Frames (A and B) using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Further securing of the upper bunk side rails to the end frames.
Step 4: Install Bed Slats (O). Insert the bed slats (O) into the designated slots on the Upper Bunk Side Rails (C and D). Ensure they are securely seated.
Image: Visual guide for placing bed slats 'O' into the upper bunk frame.
Step 5: Install Bed Slats (P). Insert the remaining bed slats (P) into the designated slots on the Upper Bunk Side Rails (C and D). Ensure they are securely seated.
Image: Visual guide for placing bed slats 'P' into the upper bunk frame.
Step 6: Install Center Support Bars (I). Attach the center support bars (I) to the bed slat frame, ensuring they align with the pre-drilled holes. Do not fully tighten.
Image: Diagram showing the placement of center support bars 'I' within the bed frame.
Step 7: Secure Center Support Bars. Secure the center support bars (I) using bolts (Bb+Ee) and Allen wrench (Gg). Do not fully tighten.
이미지: 클로즈업 view of securing center support bars with hardware.
Step 8: Attach Bottom Cross Bar (H). Connect the Bottom Cross Bar (H) between the lower sections of the End Frames (A and B) using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the attachment of the bottom cross bar H to the end frames.
Step 9: Attach Desk Support Bars (E, F). Connect the Desk Support Bars (E and F) to the End Frames (A and B) using bolts (Y+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Illustration of attaching desk support bars E and F to the main frame.
Step 10: Secure Desk Support Bars. Secure the Desk Support Bars (E and F) at their intersection point using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
이미지: 클로즈업 view of securing the intersection of desk support bars E and F.
Step 11: Attach Desk Braces (R, S). Connect the Desk Braces (R and S) to the Desk Support Bars (E and F) and the Bottom Cross Bar (H) using bolts (Y+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the attachment of desk braces R and S to the frame.
Step 12: Install Desk Surface (U). Place the Desk Surface (U) onto the Desk Support Bars (E and F). Align the holes and secure using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Illustration of placing and securing the desk surface U.
Step 13: Secure Desk Surface. Secure the Desk Surface (U) to the Desk Braces (R and S) using bolts (Y+Dd) and Allen wrench (Gg). Do not fully tighten.
이미지: 클로즈업 view of securing the desk surface to the desk braces.
Step 14: Final Desk Surface Tightening. Fully tighten all bolts connecting the Desk Surface (U) to the Desk Support Bars (E, F) and Desk Braces (R, S).
이미지: 상세 view of tightening bolts under the desk surface.
Step 15: Attach Keyboard Tray Supports (K, L). Attach the Keyboard Tray Supports (K and L) to the underside of the Upper Bunk Side Rails (C) using bolts (Z+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the attachment of keyboard tray supports K and L.
Step 16: Secure Keyboard Tray Supports. Secure the Keyboard Tray Supports (K and L) to the Desk Support Bars (E and F) using bolts (V+Dd) and Allen wrench (Gg). Do not fully tighten.
이미지: 클로즈업 view of securing keyboard tray supports to the desk support bars.
Step 17: Install Keyboard Tray (J). Slide the Keyboard Tray (J) into the Keyboard Tray Supports (K and L). Secure it using bolts (X+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the installation of the keyboard tray J.
Step 18: Attach Suspended Storage Shelf Brackets (M, N). Attach the Suspended Storage Shelf Brackets (M and N) to the Keyboard Tray Supports (K and L) using bolts (X+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the attachment of storage shelf brackets M and N.
Step 19: Install Suspended Storage Shelf (Q). Attach the Suspended Storage Shelf (Q) to the brackets (M and N) and the Upper Bunk Side Rail (C) using bolts (Aa+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the installation of the suspended storage shelf Q.
Step 20: Install Shelf (T). Attach the Shelf (T) to the Suspended Storage Shelf (Q) and brackets (M, N) using bolts (Aa+Dd) and Allen wrench (Gg). Do not fully tighten.
Image: Diagram showing the installation of the shelf T within the storage unit.
Step 21: Attach Ladder (G). Attach the Ladder (G) to the Upper Bunk Side Rail (B) using bolts (W+Cc) and Allen wrench (Gg). Fully tighten all bolts from previous steps.
Image: Diagram showing the attachment of the ladder G to the bunk bed frame.

5. 사용 설명서

Once assembled, the loft bed is ready for use. Ensure all connections are tight and stable before allowing anyone to use the bed.

위쪽 침대: Use a twin-sized mattress that meets the specified dimensions (74"-75" long, 37-1/2"-38-1/2" wide, and no more than 8" thick). Always use the ladder for entry and exit.
공부 책상: The desk surface and keyboard tray are designed for computer use, studying, or other activities. The suspended shelf provides additional storage for books or supplies.
중량 용량: The upper bunk has a maximum weight capacity of 300 lbs. Do not exceed this limit.

6. 유지관리

Regular maintenance helps ensure the longevity and safety of your loft bed.

청소: 금속 프레임을 광고로 닦으세요amp cloth, then dry thoroughly with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
검사: Periodically (e.g., monthly) check all bolts, screws, and connections to ensure they are tight. Re-tighten as necessary. Inspect the guardrails, ladder, and all structural components for any signs of damage, wear, or loose parts.
매트리스 관리: Follow the manufacturer's guidelines for mattress care.

7. 문제 해결

If you encounter any issues with your loft bed, refer to the following common solutions:

흔들림 또는 불안정성: Ensure all bolts and connections are fully tightened. Check that the bed is placed on a level surface. Adjust the levelers at the bottom of the end frames if needed.
삐걱거리는 소리: Squeaking often indicates loose connections. Re-tighten all bolts. Applying a small amount of lubricant (e.g., silicone spray) to metal-on-metal contact points can also help.
조립의 어려움: Review the assembly instructions and video carefully. Ensure all parts are correctly oriented and that you are using the correct hardware for each step. Do not force parts together.
손상되었거나 누락된 부품: If you received damaged or missing parts, contact Powell customer service immediately for assistance. Do not attempt to use substitute parts.

8. 사양

특징	세부 사항
모델 번호	941-119
크기	쌍
재료	금속
제품 크기(L x W x H)	77.63인치 x 56인치 x 72.5인치
품목 무게	124.1 파운드
색상	땜납
마감 유형	Brushed, Powder Coated, Steel
Maximum Upper Bunk Weight Recommendation	300 파운드
호환 매트리스 크기	Twin (74"-75" L x 37-1/2"-38-1/2" W, max 8" H)
특징	박스 스프링이 필요 없습니다
포함된 구성 요소	설치 설명서, 슬랫
필요한 조립	예

Dimensions diagram for Powell Z-Bedroom Loft Bed

Image: Detailed dimensions diagram of the Powell Z-Bedroom Loft Bed.

9. 보증 및 지원

For warranty information, please refer to the product description on the original store page or contact Powell customer service directly. For support regarding assembly, missing parts, or general inquiries, please reach out to Powell customer service through their official channels.

제조업체: 파웰

연락처 정보: Please visit the official Powell web최신 연락처 정보는 해당 웹사이트 또는 판매점의 고객 지원 페이지를 참조하십시오.

	페인트칠한 가구 관리: 유지 관리 가이드 A comprehensive guide to maintaining the beauty and durability of painted furniture. Learn essential tips for regular dusting, gentle cleaning, stain removal, moisture protection, sun protection, and preventing scratches.
	Powell PowlVac 38™ 금속 외함 스위치기어: 01.418.65203B 사용 설명서 Powell PowlVac 38™ 금속 외함 개폐기(모델 01.418.65203B)에 대한 상세 사용 설명서입니다. 38kV, 1200A/2000A, 40kA 개폐기의 안전, 장비 설명, 설치, 작동 및 유지보수에 대한 내용을 다룹니다.
	파월 록하트 블랙 스툴 조립 설명서 및 보증서 파웰 디자인 록하트 스툴 블랙(모델 16D8216CSB)의 상세 조립 설명서, 부품 목록, 하드웨어 식별 정보 및 보증 정보입니다. 교체 부품 주문 절차도 포함되어 있습니다.
	Powell Furniture Care Guide: Faux Leather and Metal Comprehensive care and maintenance instructions for Powell faux leather upholstered furniture and metal furniture, including tips on cleaning, preventing damage, and general upkeep for models like the PWLS578.
	파월 도저 아이보리 셰르파 슬리퍼 체어 조립 설명서 및 보증서 본 문서에는 파월 도저 아이보리 셰르파 슬리퍼 체어의 조립 설명서, 부품 목록 및 보증 정보가 포함되어 있습니다. 새 가구를 조립하는 방법과 제한적 보증 내용을 확인해 보세요.
	파월 25LS2006LVST 2인용 소파 조립 설명서 및 보증서 Linon Home Decor의 Powell Loveseat 모델 25LS2006LVST에 대한 종합적인 조립 설명서 및 보증 정보입니다. 부품 목록, 안전 경고 및 서비스 연락처 정보가 포함되어 있습니다.

Powell 941-119