TIMBERTECH Diamond Core Drilling Machine

1. 안전 지침

Always observe basic safety precautions when operating electrical tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before use.

• 개인 보호 장비: Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and work gloves. Dust masks are recommended for dry drilling operations.
• 작업 영역: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Ensure adequate ventilation.
• 전기 안전: Do not expose power tools to rain or wet conditions. Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts. This machine is equipped with an integrated safety switch (RCD/GFCI) for enhanced electrical protection.
• 기기를 안전하게 고정하세요: The machine generates significant torque. Always ensure the drilling machine and its stand are securely anchored to the work surface before operation to prevent rotation and injury.
• 과부하 보호: The machine features an electronic overload protector and a safety clutch. If the drill bit binds or the motor is overloaded, the clutch will engage to protect the motor. Reduce feed pressure if this occurs.
• 상수도: For wet drilling, ensure the water supply connection is secure and free from leaks. Avoid spraying water directly onto electrical components.
• 안정: Ensure the support base is stable and level before starting any drilling operation.

2. 제품 오버view

The TIMBERTECH Diamond Core Drilling Machine KEBO01 is a powerful tool designed for professional and DIY renovation projects, capable of drilling precise holes through concrete, reinforced concrete, asphalt, and other hard construction materials. It supports both wet and dry drilling applications.

그림 2.1: Labeled components of the Diamond Core Drilling Machine.

주요 특징:

• 강력한 모터: Equipped with a 3900 W motor for demanding drilling tasks.
• 다양한 드릴링: Suitable for both wet and dry drilling applications.
• Wide Drilling Range: Capable of drilling holes with diameters from 15 mm to 205 mm.
• 안전 기능: Includes an integrated safety switch and electronic overload protection.
• 견고한 구조: Stable support base and durable metal components for reliable operation.
• Integrated Water Supply: Features a cooling water hose with a tap connector for efficient wet drilling.

3. 기술 사양

The following table details the technical specifications of the TIMBERTECH Diamond Core Drilling Machine KEBO01.

그림 3.1: Product dimensions and included components.

Note: There is a discrepancy in power ratings between the product title/feature bullets (3900W) and the detailed specifications (2500W). The 3900W refers to the motor's peak power, while 2500W is the rated continuous power. Similarly, rotation speed is listed as 580 rpm in some places and 700 rpm in others; 580 rpm is the maximum operational speed.

4. 설정

안전하고 효율적인 운영을 위해서는 적절한 설정이 중요합니다.

4.1. Assembly of the Stand and Drill

1. 모든 구성품을 꺼내어 손상되지 않았는지 확인하십시오.
2. Attach the drilling machine to the support stand. Ensure all mounting bolts are tightened securely.
3. Adjust the height and angle of the drill on the stand as required for your application.

4.2. Securing the Machine

Due to the high torque generated, the machine must be firmly anchored.

• Use appropriate heavy-duty anchors (not included) to secure the support base to the drilling surface.
• Ensure the stand is perpendicular to the drilling surface for accurate holes. The base features adjustable leveling screws for precise alignment.

4.3. Installing the Core Drill Bit

그림 4.1: Drill bit connection and available diameters.

1. Ensure the machine is unplugged before installing or changing drill bits.
2. Select a diamond core drill bit with a 1 ¼ inch connection suitable for your desired drilling diameter (15 mm to 205 mm). Drill bits are sold separately.
3. Thread the core drill bit onto the machine's shaft. Tighten it firmly using appropriate wrenches (not included).

4.4. Connecting the Water Supply (for Wet Drilling)

1. Attach the provided cooling water hose to the water inlet valve on the machine.
2. Connect the other end of the hose to a suitable water tap. A tap connector is required and not included with the machine.
3. 모든 연결 부분이 단단히 조여져 누수가 발생하지 않도록 하세요.

5. 사용 설명서

Follow these steps for safe and effective drilling.

5.1. 작업 전 점검

• Verify that the machine is securely anchored and the drill bit is properly installed.
• Ensure the work area is clear of obstructions and personnel.
• For wet drilling, confirm the water supply is connected and the valve is closed.
• Check that the power cord is in good condition and connected to a suitable power outlet.

5.2. 기계 시작

그림 5.1: Safety switch for ON/OFF control.

1. Press the green 'ON' button on the safety switch to start the machine.
2. Allow the drill bit to reach full speed before engaging the material.

5.3. Drilling Process (Wet Drilling)

그림 5.2: Wet drilling in progress with water cooling.

1. Once the drill is running, slowly open the water valve to allow a steady flow of cooling water to the drill bit. Adjust the flow to create a slurry, not excessive splashing.
2. Using the feed handle, slowly advance the drill bit into the material. Apply consistent, moderate pressure. Avoid excessive force, which can lead to overheating or binding.
3. Maintain a steady feed rate. If the motor sounds strained or the clutch engages, reduce the feed pressure.
4. Continue drilling until the desired depth is reached or the core is cut through.

5.4. Drilling Process (Dry Drilling)

그림 5.3: Dry drilling operation.

• Dry drilling is suitable for certain materials and situations where water is not feasible. Ensure you use dry-specific diamond core bits.
• Operate the machine with consistent, moderate pressure.
• Periodically withdraw the drill bit from the hole to allow dust to clear and the bit to cool.
• Always wear a dust mask and ensure good ventilation during dry drilling.

5.5. Stopping the Machine and Removing the Core

1. Once drilling is complete, retract the drill bit from the hole.
2. Close the water valve (if wet drilling).
3. Press the red 'OFF' button on the safety switch to turn off the machine.
4. Carefully remove the drilled core from the drill bit or the hole. You may need specialized tools to extract stubborn cores.

6. 유지관리

정기적인 유지보수는 드릴링 장비의 수명 연장과 최적의 성능을 보장합니다.

6.1. 청소

• 사용 후에는 반드시 기기를 전원에서 분리하세요.
• Clean the machine, especially the drill bit and shaft, to remove concrete slurry or dust. Use a damp 천으로 만든 옷; 강한 화학물질은 피하세요.
• Ensure the water inlet and outlet are clear of debris.

6.2. 카본 브러시 교체

• The motor uses carbon brushes, which wear down over time. The machine includes two spare carbon brushes.
• When the motor performance decreases or sparks become excessive, the carbon brushes may need replacement.
• Refer to a qualified technician or the detailed service manual for instructions on replacing carbon brushes. Always disconnect power before servicing.

6.3. 보관

• Store the machine in a dry, secure location, away from moisture and extreme temperatures.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

7. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

8. 보증 및 지원

For warranty claims, technical support, or spare parts, please contact your retailer or the manufacturer, FF Europe. Keep your purchase receipt as proof of purchase.

Please refer to the original packaging or product documentation for specific warranty terms and conditions applicable to your region.