Fender Bassman 810 Neo Cab Guitar Amplifier Cabinet Instruction Manual

1. 서론

Thank you for choosing the Fender Bassman 810 Neo Cab Guitar Amplifier Cabinet. This cabinet is engineered to deliver a powerful and clear bass sound, suitable for large venues and demanding performances. Its design combines classic Fender aesthetics with modern, lightweight construction for ease of transport and setup.

Key features of your Bassman 810 Neo Cab include:

• Eight 10-inch Fender Special Design Eminence Neodymium speakers.
• Integrated compression driver horn with attenuator for precise high-frequency control.
• Robust power handling: 2000 Watts program, 1000 Watts continuous at 4 ohms.
• Lightweight plywood enclosure with vintage late-’60s/early-’70s Fender "blackface" styling.
• Speakon connectors for secure and reliable connections.
• Fixed casters and heavy-duty handles for convenient hand-truck operation and transport.
• Rear glide rails for smoother loading and unloading.

This manual provides essential information for the safe and optimal use of your amplifier cabinet. Please read it thoroughly before operation.

2. 안전 정보

감전, 화재 또는 부상을 예방하려면 항상 다음 안전 예방 조치를 준수하세요.

• 전원: Connect the cabinet only to the specified power supply voltage. 전원 코드가 손상되지 않았는지, 그리고 제대로 접지되었는지 확인하십시오.
• 통풍: Do not block ventilation openings. Ensure adequate airflow around the cabinet to prevent overheating.
• 수분: Do not expose the cabinet to rain, moisture, or excessive humidity. Keep liquids away from the unit.
• 서비스: 제품을 직접 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오.
• 놓기: Place the cabinet on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
• 청력 보호: 이것 amplifier cabinet can produce high sound pressure levels. Prolonged exposure to high volume can cause permanent hearing damage. Use appropriate hearing protection.
• 제안 65 경고: 이 제품에는 캘리포니아주에서 암과 선천적 결함 또는 기타 생식적 피해를 일으키는 것으로 알려진 화학 물질이 포함되어 있습니다.

3. 설정

Follow these steps to set up your Fender Bassman 810 Neo Cab:

1. 짐 풀기: 조심스럽게 amplifier cabinet from its packaging. Inspect for any signs of damage during transit.
2. 놓기: Position the cabinet on a stable, flat surface. Ensure there is sufficient space around the unit for ventilation.
3. 에 연결 Amplifier Head: Use high-quality speaker cables to connect your amplifier head to the Bassman 810 Neo Cab. The cabinet features Speakon connectors for secure connections. Ensure the impedance of your amplifier head matches the cabinet's impedance (4 ohms).
4. 전원 연결: 전원 케이블을 연결하세요 amplifier head (not the cabinet, as this is a passive cabinet) and then to a grounded electrical outlet.
5. 계기 연결: Connect your bass guitar to the input of your amp리퍼 헤드.

그림 3.1: 전면 view of the Fender Bassman 810 Neo Cab. This image shows the robust grille and overall construction of the cabinet.

4. 운영

The Bassman 810 Neo Cab is a passive speaker cabinet and does not have its own controls. All sound shaping and volume adjustments are made via your connected amplifier head. Refer to your amplifier head's manual for detailed instructions on its controls.

However, it's important to understand the connections on the rear panel of the cabinet:

4.1 후면 패널 연결

• Parallel Speaker Outputs: These Speakon jacks are used to connect the cabinet to your amplifier head. The cabinet is rated at 4 ohms. Ensure your amplifier head can safely drive a 4-ohm load.
• Compression Driver Horn Attenuator: This control allows you to adjust the level of the high-frequency horn. Turn it clockwise to increase the high-frequency output, or counter-clockwise to decrease it. This helps tailor the cabinet's sound to your preference and playing environment.

그림 4.1: 후면 view of the Fender Bassman 810 Neo Cab. This image, representing the overall product, highlights the location of the Speakon inputs and the compression driver horn attenuator on the rear panel.

Note: The provided video "Rumble 500 Features Overview" is for a different amplifier model (Fender Rumble 500 head) and is not directly applicable to the operation of this passive Bassman 810 Neo Cab. Therefore, it is not included in this manual.

5. 유지관리

Proper care will ensure the longevity and optimal performance of your Bassman 810 Neo Cab.

• 청소: Use a soft, dry cloth to clean the exterior of the cabinet. Avoid abrasive cleaners or solvents that could damage the finish.
• 저장: When not in use, store the cabinet in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
• 수송: Utilize the built-in casters, handles, and rear glide rails for safe and easy transport. Avoid dropping or subjecting the cabinet to severe impacts.
• 스피커 관리: Avoid overdriving the speakers beyond their rated capacity, as this can cause damage.

6. 문제 해결

If you encounter issues with your Bassman 810 Neo Cab, consult the following common troubleshooting tips.

If the problem persists after trying these solutions, please contact Fender customer support or an authorized service center.

7. 사양

8. 보증 및 지원

Fender products are built to high standards and are backed by a limited warranty. For detailed warranty information, please refer to the official Fender web사이트 또는 구매 시 포함된 보증 카드를 참조하세요.

For technical support, service, or parts, please contact Fender Customer Support:

• Web대지: www.fender.com/support
• 핸드폰: Refer to the Fender web지역 연락처 사이트.

고객 지원팀에 문의하실 때는 모델 번호(2249200000)와 일련 번호를 준비해 주시기 바랍니다.